Jump to content
SAU Community

Recommended Posts

Hi Fellas,

Its that sad time where I'm in an unavoidable situation where I need to let the car go. Im Starting a family and the skyline just isnt big enough or comfortable enough anymore.

History: Have had the car since December 2003, did the RB26dett conversion in late 2008(July/ August). The car has done a total of 114,000kms and roughly 25,000kms after the conversion/ rebuild.

Location: Melbourne

Contact No: 0488500845

Engine Mods:

The RB26 was bought from another R33 GTR and stripped.

- Head was Surfaced, pressure tested, hardness tested, vacuum tested with all 24 valve stems seals replaced, exhaust valve (12) replaces and 12 exhaust guides put in, synchro seals replaced as well.

- Hks step1 adjustable cams with 256 8.7 lift & exhaust (Cams have bee dialled in)

- ACL Metal head gasket

- ARP head studs

- Block sleeves

-ACL Forged pistons(std size) and rings

- Eagle conrods

-ACL bottom end bearings

- Machines crank

-Genuine Nissan Main studs

-N1 oil pump

-Machines & horned block, also torque plated

The rest of the aftermarket parts on the car include

- BC Adjustable coil overs with 32 damper adjustment settings

- DBA4000 slottered rotors with plenty of meat on it

- Kakimoto Cat back stainless steel aftermarket exhaust

-XFlow highflow car

-3 inch front pipes to the CAT

-18inch SportMaxx rims with 235/40/18 tyres with plenty of thread

-Monza Racing front seats

-exedy cusion button clutch 3000kms old

-R33 GTR Standard BOV Piping

-R33 GTR Intercooler

-R33 GTR Engine and Chassic loom

-R33 GTT Gearbox

-R34 GTT TailShaft

-R33 Standard turbos running at 12psi

The conversion alone cost me $16,000 and Ive got receipts for it.

Engine compression on all 6 cylinders tested 2 weeks ago when it went in for a service which is every 5000kms or 3 months is

Cylinder 1 - 170

Cylinder 2 - 172

Cylinder 3 - 169

Cylinder 4 - 170

Cylinder 5 - 171

Cylinder 6 - 170

The car has couple of stone chips on the front bumper, the front doors have 2 scratches on them and the right rear quarter panel has a scratch. The rear demister for some reason hasnt worked after the conversion along with the reverse lights which are not connected. The tacho on odd occassions jumps around but other than that there is nothing else to do.

I have not finished the engineers certificate since I havent had the time but it needs R33 GTR Brembos and an R33 brake booster for it to pass the engineers

The chassic has not been tampered with in anyway during the conversion(eg. drilling of holes to get piping through) and I made sure of that.

As you can tell from the above I build this car on the pure basis to keep it for the long run and only for peformance hence why its an awesome sleeper.

Currently I have advertised the car on carsales and heres the link: http://www.carsales.com.au/used-cars/priva...6&D=9160486

I have advertised the car on car sales at $12000ono.

In saying that throw me offers and you might be surprised since i need to get this moving, espically if you can take it off me this week

LASTLY: No Dreamers please, if you dont have the cash dont bother wasting my time. I dont mean to be rude but it needs to be said.

post-27757-1283294799_thumb.jpg

post-27757-1283294807_thumb.jpg

post-27757-1283294813_thumb.jpg

post-27757-1283294822_thumb.jpg

post-27757-1283294835_thumb.jpg

post-27757-1283294844_thumb.jpg

post-27757-1283294855_thumb.jpg

post-27757-1283294867_thumb.jpg

post-27757-1283299105_thumb.jpg

post-27757-1283299112_thumb.jpg

post-27757-1283299136_thumb.jpg

post-27757-1283299143_thumb.jpg

Edited by 4drlvr
  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don’t really have any ideas how to set the timing on the CAS 😂, sounds like the top, sounds like it maybe misfiring as well as ticking,  got the box sorted 😌, must of been a air bubble on the clutch side
    • Use a 2' length of hose (that's 2 foot, not 2 inches) as a stethoscope to localise the source of the ticking. From cam covers? From exhaust or turbo manifold gasket? From injectors? From lower down in the engine? Etc. Use a timing light to set the timing. Put Redline Lightweight Shockproof in the box. It's not the very best thing for the box, but it will take a box that refuses to engage a gear with other oil, and make it engage a gear. I had to put it in when I installed the R33 box I have in my car. It would not select ANY gear when running. Smurf jizz made it work. That was >10 years ago and I still use it. I'm stuck with it now. Failing that - rebuild the box.
    • Well done Duncan. The fuel tank bulkhead lid is also in great condition (some of mine were stuffed). These are now out of production and good ones like that are becoming hard to come by.
    • Wow that's a steal, you've done well there. 
    • Exterior LEDs R34 2Dr R34 4Dr Position Lamp T10 T10 Winker front T20S T20S side T10 T10 rear T20S S25S150 Anti-hyfla relay TYPE3 TYPE3 tail T10 T20W Stop Lamps T20W T20W High Mount T16 T16 back T16 T20S number T10 T10 trunk T10 T10 Interior LED Item No.     Map Lamp BA9S single-sided     Room Lamps T10×31     Trunk Lamp T10     meter Early T6.5 pedestal     final T6.5 pedestal     NISMO T6.5 pedestal     Liquid crystal section T6.5 pedestal     Winker T6.5 pedestal     High Beam T6.5 pedestal     3 SERIES METER Early T6.5 pedestal     final T6.5 pedestal     NISMO T6.5 pedestal     air conditioner Early Liquid Crystal T3     Late LCD T4.2 Short     button T4.2 Middle     Hazard SW T3 Pedestal Short     Keyring T5     Cigar Socket T5
×
×
  • Create New...