Jump to content
SAU Community

Recommended Posts

I thought i would post up my 98 V E85 tune. I didn't realise i was making such little power in the first place....229rwkw from a GT3040 (0.63) then with E85 252rwkw.

Sorry about the quality and no idea why it is sideways

Feel free to express your thoughts. I think something is wrong as my 550cc injectors hit 94% on cold nights. Still fun to drive though :D

IMG_0358.jpg

IMG_0359.jpg

Cheers

James

Edited by Bond
Link to comment
https://www.sau.com.au/forums/topic/335190-my-e85-experience/
Share on other sites

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

Yeah i was expecting the increased duty cycle but not above 90% Does anyone think it's running too rich?

Besides bad cold start (not a daily driver) it drives really well and is more responsive than before. Now having traction issues but i don't have the best tyres. First and second gear feel very similar but the torque in third and forth feels insane. Pulls hard all the way off the clock.

Edited by Bond
Alittle offtopic, but roughly how much power can 700cc injectors running E85 support?

Good question as ive got 720cc injectors, would e85 also clean the injectors and valves due to the alcohol content?

where in the Gold Coast area can you buy e85, how much is it?

Edited by boostn32
Good question as ive got 720cc injectors, would e85 also clean the injectors and valves due to the alcohol content?

where in the Gold Coast area can you buy e85, how much is it?

Yes, the whole engine and fuel system will probably be spotless, my exhaust was pretty clean too. :D Make sure you change the fuel filter soon after as it may get clogged.

Most places seem to sell it for around $1L, not sure what Caltex plans to sting us yet.

another hijack...

i'm pretty sure my 700cc injectors run at 85% with 320kw at the wheels..does that sound right? are there more people that have tested e85 with 700cc injectors? hopefully i can get away with the injectors i've got.

will i get away with the 280l/ph (from memory) upgraded in-tank pump if i run e85? i'm guessing i'll be headed to around 350kw at the wheels.

No one's mentioned the .63 rear on the turbo?

Could that be the reason it's peaking at 5300rpm and not getting the results wanted?

as for injectors funning out on that power, that's got me worried, as I'm soon to be on e85 running 550's :)

IMO the power has pretty much come from the additional boost, not the fuel at all, as Jez has already noted.

Something is not right with that setup, you should be making 250rwkw on PULP at least & around 280-300 on E85 (if not more).

Injectors under that much duty also is worrying.

Two things are pointing to setup issues.

No one's mentioned the .63 rear on the turbo?

Could that be the reason it's peaking at 5300rpm and not getting the results wanted?

as for injectors funning out on that power, that's got me worried, as I'm soon to be on e85 running 550's :)

Where does a GT3040 fit in size wise compared to a GT3071, GT3076 or GT3082? Is it smaller as the name suggests?

I remember reading a performance place (think it was ERD) recommending a 0.63 housing on a GT3082 on an RB25. But if a GT3040 is smaller than a GT3071 then a 0.63 housing is definitely too small.

I dont understand how joey gets so much power out of his injectors. I would expect 550s to peak out around 260-290rwkw on E85.

Yes I believe something is wrong but not really sure where to start. As I said earlier all I have really changed is the rear muffler (removed cannon and put an xforce twin pipe thing). With my current setup I probably couldn't get any more power to the ground but would like to figure out what's wrong.

GT3040 is the old description (larger comp wheel), or what everyone else calls a GT3082 these days.

So its the larger of the GT30XX family compared to a 3071

Well if thats the case, 0.63 housing should still make a lot more than what he is.

I mean hiflowed standard turbos make more than that.

Interesting the power falls over at about 5,500rpm. Also the dyno only goes up to ~6,200rpm?? Something seems wrong, unless the rpm on the dynosheet is not correct.

Edited by Harey

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hmm. Yes. I should have been clearer. 1000s for Haltech, for extra headroom. 725s for Nistune. You might even be OK with 640s, but if the possible power ends up much more than 300 rwkW you will run out of headroom on the 640s. That would probably be OK and a signal to not push it to that sort of power with Nistune anyway. At that level you probably do want to be thinking about engine protection functions. Oh, and all of that presumes 98 only, not E85. Well....the 1000s would allow you to run E85 at ~300rwkW territory, again, maybe sort of running out of headroom. Hard to tell with E85 - depends on the tuner as to how rich they like to set it up.
    • Yes.  The only scenario I can imagine when the answer isn't yes, is if you drive like there is highway patrol behind you at all times.  If your car currently runs, enjoy it and keep saving. Better costs more, keep saving until you can budget the better ECU. It's worth it.  Nope. Plenty of us making >300kw on unopened motors. Mine is unopened and makes about 350kw if I turn everything up, its fine (lots of caveats here, how the car will be used/abused, how long you expect the engine to last between rebuilds, how has the engine been maintained prior to coming into your ownership, etc etc).   
    • Sorry just wanting to clarify, at this power goal, which should I be going? Also, More info regarding suspension, the rear upper camber arms were used to get the camber back to i believe around -0.5 ~ -1 degree (@ Road and Race in Rydalmere), I forgot the exact figure, but ALOT less camber than what it came originally which was like -2.5degrees. Are the traction arms still recommended? The bilsteins from SydneyKid, they've got 400lb/in fronts & 275/in in the rear, revalved to his specs. Intercooler, I'm just having a look at some on Rakuten.jp and some other japanese sites. Might get something from back there, GReddy, Blitz or HPI, all crossflow. Looking at roughly $450-$500 AUD + shipping... Theres not many choices except that chinese branded Justjap unless you go for blitz return flow. Yeah, only downside with Haltech is the price ahhaha, so expensive, and with all the sensors if I go that route... $$$$$ yeesh. Are headstuds/gaskets needed for <300akw?
    • Haltech fanboi reporting in. Buy the Haltech! 
    • You can try shoving a borescope down there to see what's up.
×
×
  • Create New...