Jump to content
SAU Community

Recommended Posts

I thought i would post up my 98 V E85 tune. I didn't realise i was making such little power in the first place....229rwkw from a GT3040 (0.63) then with E85 252rwkw.

Sorry about the quality and no idea why it is sideways

Feel free to express your thoughts. I think something is wrong as my 550cc injectors hit 94% on cold nights. Still fun to drive though :D

IMG_0358.jpg

IMG_0359.jpg

Cheers

James

Edited by Bond
Link to comment
https://www.sau.com.au/forums/topic/335190-my-e85-experience/
Share on other sites

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

Yeah i was expecting the increased duty cycle but not above 90% Does anyone think it's running too rich?

Besides bad cold start (not a daily driver) it drives really well and is more responsive than before. Now having traction issues but i don't have the best tyres. First and second gear feel very similar but the torque in third and forth feels insane. Pulls hard all the way off the clock.

Edited by Bond
Alittle offtopic, but roughly how much power can 700cc injectors running E85 support?

Good question as ive got 720cc injectors, would e85 also clean the injectors and valves due to the alcohol content?

where in the Gold Coast area can you buy e85, how much is it?

Edited by boostn32
Good question as ive got 720cc injectors, would e85 also clean the injectors and valves due to the alcohol content?

where in the Gold Coast area can you buy e85, how much is it?

Yes, the whole engine and fuel system will probably be spotless, my exhaust was pretty clean too. :D Make sure you change the fuel filter soon after as it may get clogged.

Most places seem to sell it for around $1L, not sure what Caltex plans to sting us yet.

another hijack...

i'm pretty sure my 700cc injectors run at 85% with 320kw at the wheels..does that sound right? are there more people that have tested e85 with 700cc injectors? hopefully i can get away with the injectors i've got.

will i get away with the 280l/ph (from memory) upgraded in-tank pump if i run e85? i'm guessing i'll be headed to around 350kw at the wheels.

No one's mentioned the .63 rear on the turbo?

Could that be the reason it's peaking at 5300rpm and not getting the results wanted?

as for injectors funning out on that power, that's got me worried, as I'm soon to be on e85 running 550's :)

IMO the power has pretty much come from the additional boost, not the fuel at all, as Jez has already noted.

Something is not right with that setup, you should be making 250rwkw on PULP at least & around 280-300 on E85 (if not more).

Injectors under that much duty also is worrying.

Two things are pointing to setup issues.

No one's mentioned the .63 rear on the turbo?

Could that be the reason it's peaking at 5300rpm and not getting the results wanted?

as for injectors funning out on that power, that's got me worried, as I'm soon to be on e85 running 550's :)

Where does a GT3040 fit in size wise compared to a GT3071, GT3076 or GT3082? Is it smaller as the name suggests?

I remember reading a performance place (think it was ERD) recommending a 0.63 housing on a GT3082 on an RB25. But if a GT3040 is smaller than a GT3071 then a 0.63 housing is definitely too small.

I dont understand how joey gets so much power out of his injectors. I would expect 550s to peak out around 260-290rwkw on E85.

Yes I believe something is wrong but not really sure where to start. As I said earlier all I have really changed is the rear muffler (removed cannon and put an xforce twin pipe thing). With my current setup I probably couldn't get any more power to the ground but would like to figure out what's wrong.

GT3040 is the old description (larger comp wheel), or what everyone else calls a GT3082 these days.

So its the larger of the GT30XX family compared to a 3071

Well if thats the case, 0.63 housing should still make a lot more than what he is.

I mean hiflowed standard turbos make more than that.

Interesting the power falls over at about 5,500rpm. Also the dyno only goes up to ~6,200rpm?? Something seems wrong, unless the rpm on the dynosheet is not correct.

Edited by Harey

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • AFM looks to be a z32 The injectors maybe old Nismo 555cc The turbo tag when looked up seems to be a gt2871 , imagine it would have the bigger rear housing .82 all look like the mid 00's mods when he started building it up. Vac hose seems right but would need to see a diagram. Great work going up there and sorting it out, be a good club car for someone wanting a good reliable rig.  I know I would like to have it but no space and too many other race cars at the moment.
    • Heys guys I got a r32 gtst speedo is out by 10kph seems the faster I go the more it be out  just seeing if anyone else had to problem and knows how to fix it 
    • I can't agree. If we hadn't all been brought up with the noise caused by the inefficiency of an ICE, no-one would actually ask for all that. An EV is like any other car, it just goes better. 
    • 2 more things I have to work out Easy one first...can anyone describe how to pull the fuel pump and sender from a 33? I can feel there is some sort of mount and clips but don't have a manual and don't know the trick......if not I'll spend some quality time in the boot witha lighter tomorrow. Second question is harder.  He had changed the upper plenum to a plazmaman but clearly got to a point with the vacuum hoses where he said "f**k it, I'm going inside for a beer" and never came back to that job because it was a mess. Am I right to think that I need: 1. Pre throttle (16mm nipple on inlet) to AAC's main 20mm fitting as the main pre throttle feed 2. ACC has a second 13m outlet joined to that 20mm fitting which I think is the pre throttle air supply for the cold start valve? 3. Cold start valve's outlet fitting then goes to Plenum (to bypass throttle?) There is some adapter on the back of the ACC with 2 fittings (13mm and 10mm), do I run the 10mm through a 1 way valve to the Brake Booster (4) and the 13mm back to a 13mm nipple on the Plenum as the Idle control (5)? 6. Run a 6mm vacuum line from the Turbosmart BOV to the Plenum? 7. Run a 5mm vacuum line from the Fuel Pressure Reg to the Plenum? 8. Run a 5mm vacuum line from the Turbosmart Boost controller to the Plenum? (Wastegate already has a pre turbo pressure source running to the solenoid then the wastegate on the other side of the bay)  Any help appreciated, the GTR is quite different setup and while the Stagea also has FFP it is different again. (And no Dose, I'm not pissing it all off and putting a ethrottle on it....)
    • OK, onto some questions to try and speed up the process a little. Does anyone know what core this Garret is? I know it is a high flowed standard turbo but nothing else about it. Tag says OK 0169J - 446179-5032 Same question for the injectors, I don't know what they flow and ideally can work it out before it hits the dyno, they are a mustard yellow side feed
×
×
  • Create New...