Jump to content
SAU Community

Recommended Posts

There are plenty of kits out there on the market, both Jap & US kits will do.

I will be fitting the Stillen gen 2 true dual system to my car tomorrow.

Best option would be to spend the money and get your zorst from a recognised manufacturer as they have spent the time and money to R&D a proper system.

If you go get a custom done here at your local pipe bender, you will more than likely end up with a drone. :starwars:

Edited by pv35gt8
Like the topic header thinkin of gettin an exhaust for my V35 sedan , has anyone had any experience with them? are this kits for the US G35 suitable for a V35? or is the best way to go custom? Any advice is appreciated

The G35 sedan exhausts should fit, but IMO you can't really go past an exhaust from one of the major Japanese makers (Fujitsubo, Weldinum/Nismo, Kakimoto etc).

Having said that, I will be more than happy to be proven wrong by James' Stillen system tomorrow (you forgot to mention that we are doing your extractors as well mate! Aren't they Tomei?)

true so what places are there here to get the bits from ??

Yep, as below... Yahoo Auctions.

For exhaust stuff, I use Import Monster and have it shipped by sea in one of their containers.

They will then ship it to your door for a good price.

Alternatively you could always request RHDJapan to list the part and buy it through them.

yahoo.jp

fujitsubo from $800 + $250 delivery

:P

I was lucky enough to have something like this upon purchase on my 300GT Sedan.

http://www.nengun.com/impul/blast-ii-muffler

I don't know alot about this but my car is only single exaust and sounds nice and quite responsive.

Maybe I have the Blast 1 ?

Not sure if I meet EPA levels either ?

There are plenty of kits out there on the market, both Jap & US kits will do.

I will be fitting the Stillen gen 2 true dual system to my car tomorrow.

Best option would be to spend the money and get your zorst from a recognised manufacturer as they have spent the time and money to R&D a proper system.

If you go get a custom done here at your local pipe bender, you will more than likely end up with a drone. :action-smiley-069:

how does the stillen system go?

The Buddy Club will be loud

I don't know anything about Megan Racing.

Very, very tough to go past a Fujitsubo exhaust.... in any car! Not to mention that it will be a guaranteed bolt on upgrade.... as opposed to fighting with something that the Americans call "bolt on"... aye James?

as opposed to fighting with something that the Americans call "bolt on"... aye James?

Yes the Stillen was a bit of a fight to line up, but we got it there in the end.

The lovely note it produces was worth the effort :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ayooo, been a while mates. I have a s2 r33 gtst and air stopped coming out of all the top vents.   My car has always made an actuator gear noise when turning the car on but that's a different issue I think? Did searches and am at process of thinking it's an actuator or some type of motor? I see a few different actuators and don't know which one. Would be nice to know if it was the one that's under the steering wheel so the dash doesn't need to come out.
    • Hi, just checking. Did you get this stuff made by Vspec Performance and at what price roughly? Looking into (sometime later) also getting such a intake kit, and Trust as well as HKS don't make a full set like this anymore.
    • 2025 Update PRP RB30 Black and Crank Shipped from Austrailia made it and was sent off to the machine shop. -700 to 800hp Service was done to the Block, which included: Inspection Prep and Black Brace to convert engine to 4wd oil Pan  Crank Fully prepped for 1000hp PRP RB30 timing belt kit w/ ALL options Nitto Pistons Nitto I-Beam Rods Nitto Oil Pump New OEM Nissan RB26 Cylinder Head Shipped Supertech intake and exhaust Valves over-sized Kelford 272 cams Mild Lift Nitto Headgasket All of the machine work is completed and next step is assembly and dropping in the new motor.   Upgrades (Changes) from the previous build: Engine Management - no longer using ECUMasters. Haltech Platinum Pro Turbo - Went from twin HKS 2530s with upgraded wheels to BW362SX-E Fuel - 1000cc injectors to ID1430x Single in tank Walbro 450 to Radium External Surge Tank w/ 2x Walbro 450s     I am looking to be back on the road by the end of summer. Wish me luck! monthly updates should be coming!    
    • Realised I never posted this , also I never got a price 
    • I'm glad to hear you've joined the SKI club. Spend the Kids Inheritance.
×
×
  • Create New...