R32 Gtr Non Brembo Caliper Adaptors To Increase Disk Size From 296mm To 324mm & 324mm Brembo Disks

[sprint]

I have a pair of Caliper Adaptors to suit someone running R32 GTR Non Brembo Calipers (296mm disk) and wants to run the 324mm disks (Brembo disks out of a 350Z). Purchased from Unique Autosports and only trialled fitted. These adaptors are modified to fit an S13, s14, s15, R32 GTST hub. They can also be used to run in a R32 GTR (non brembo)

Unique sell an adaptor to go from your standard 280mm disk to 324mm (using the cast iron caliper), but when going on a GTR Aluminium Caliper, they had to mill out a section to clear the hub.

Reason for selling, just bought new set of R888's on 16's, so don't want to spend another $2g's on rims and new rubber.

These bolt straight on and include all the hardware (caliper will need to be machined or filed slightly to fit larger bolt or you can get a smaller bolt) and if Melbourne based, I can throw in a set of 350Z 324mm disks that have been freshly machined and have 29.2mm of meat left of them.

This package cost me:

$350 for standard adaptors

$100 for machining and frieght

$180 for disks

$630

$350 and you can have the lot (pick up only or I can ship adaptors only at buyers cost)

Based in Melbourne

0409707054

Edited September 5, 2010 by sprint

[sprint]

BUMP.

[sprint]

SOLD SOLD SOLD

I have a pair of Caliper Adaptors to suit someone running R32 GTR Non Brembo Calipers (296mm disk) and wants to run the 324mm disks (Brembo disks out of a 350Z). Purchased from Unique Autosports and only trialled fitted. These adaptors are modified to fit an S13, s14, s15, R32 GTST hub. They can also be used to run in a R32 GTR (non brembo)

Unique sell an adaptor to go from your standard 280mm disk to 324mm (using the cast iron caliper), but when going on a GTR Aluminium Caliper, they had to mill out a section to clear the hub.

Reason for selling, just bought new set of R888's on 16's, so don't want to spend another $2g's on rims and new rubber.

These bolt straight on and include all the hardware (caliper will need to be machined or filed slightly to fit larger bolt or you can get a smaller bolt) and if Melbourne based, I can throw in a set of 350Z 324mm disks that have been freshly machined and have 29.2mm of meat left of them.

This package cost me:

$350 for standard adaptors

$100 for machining and frieght

$180 for disks

$630

$350 and you can have the lot (pick up only or I can ship adaptors only at buyers cost)

Based in Melbourne

0409707054

SOLD SOLD SOLD

[Yeedogga]

NM too late!

Edited September 17, 2010 by Yeedogga