Jump to content
SAU Community

Recommended Posts

yeah, just wondering what people use in their radiator, some some water is fine some say not some use additives like water wetter.

I just flushed it with a hose and filled it with water and a bottle of corrosion inhibitor

Do radiator flush additives work?

Is coolant really necessary?

What do you reccomend?

What works?

Link to comment
https://www.sau.com.au/forums/topic/335673-what-do-you-put-in-your-radiator/
Share on other sites

Yes I would use coolant or your water pump won't be too fantastic down the track and that water will turn brown :D

Water is for topping up or adding to coolant concentrate mixes. I'd only use it if I had no choice.

Rust and scale removers work alright when flushing.

Yeah i read something about coolant lubricating the pump, I usually use it but didnt realize i'd run out.

But i also read another guy says hes used nothing but water and redline water wetter for 10 years with no problems..

So just wondering what i should get to add to it

Edited by Arthur T3

definatly flush the system and use coolant, i use nulon long life coolant pre mixed $20 for 5 litres so you need 2... or u could by the concentrate and mix it yourself with demineralised water. tap water for flushing only....

in my old corolla pre 80s i use the corrosion inhibitor and water wasnt really designed to run coolant...

Yea one of the reasons you are suppost to use coolent is because it has a higher boiling point than water. The water will evaporate through the overflow bottle after long drives. I use rust repellant coolant, however if you have a corroded cooling system just buy the radiator flush and do it yourself shouldn't take long.

I only use straight water to flush the system. Once it's flushed I just pour in pre-mixed Nulon red along with 500ml of Motul Mo'Cool. Works fine for me and has kept the temps consistently lower during the hotter months.

Yeah i ran a bottle of flush through it for over half an hour, not sure if it made a difference, the water that came out was brown but so was the the flush mix i put in it.. :P

Another guy told me he just runs the engine with the hose stuck in the radiator.

I also read somewhere that plain water actually cools better.

But i do remember the old man topping up the radiator in the his HJ monaro all the time, He had to check it daily. I have never had to with coolant so i guess there is truth to what you say mr massive..I didnt know this b4..

orange juice

:)

never use tap water ever this is the worse thing u could do... oh l lie u could do worse: bleach, drain cleaner, fuel, fluorine gas, OJ.

the only water you should use is distilled water most good auto shops stock it in +10L bottles or just use the pre mix

flush with the tap - put the screw back in - fill it up with tap water + some radiator flush - turn engine on with radiator cap off - idle for a few mins - drain / flush with tap water - fill up with coolant + top up with distilled water.. has never failed me. (someone correct me if im wrong)

^^ yeah thats what i did..

Someone told me to fill the radiator with coca cola and then throw a packet of mentos in it. Apparently the reaction is really good for cleaning out the corrosion..

Has anyone tried this??

^^ yeah thats what i did..

Someone told me to fill the radiator with coca cola and then throw a packet of mentos in it. Apparently the reaction is really good for cleaning out the corrosion..

Has anyone tried this??

That someone has been watching "Mythbusters" too much. Diet Coke + Mentos = BANG.

That someone ought to be shot!

Wanna shotgun??? MORE BANG!!!

back in the day some mechanics i know used to use coca cola to flush radiators and even clean the oil stains off the floors. however doing that with the coke sold today and all you will end up with is a sticky mess. as with most things these days, they aren't as potent as they used to be.

....I also read somewhere that plain water actually cools better.....

absolutely right, water is about the best thing in the universe for taking energy and getting hot slowly. only 2 problems - stopping rust (corrosion inhibitor) and it freezes at 0.....

When I was having cooling problems I ran straight distilled water + redline water wetter, it ran literally 10-15o cooler than coolant.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Read the ECU for fault codes or have someone else do it. A faulty coolant temperature sender is usually listed in ECUs. If the sensor itself is not busted it can also be a bad ground connection. Or in a really unlucky case, damaged wiring.
    • Can't be a Futjitsubo as those are made with a flex piece and Reimax is smaller in pipe diameter. If anything it is closest to a Mines pipe, but evidently it is not an actual Mines pipe.   Classic word humor
    • Alright I will try to not forget.   As GTSboy replied to you already, problem is mainly the mismatch between the actual exhaust part and the denomination in the papers. That basically just looks like tampering to a cop, if they were to check your car and notice. If it had been done right they would have clarified it to be a custom pipe and just given it a certain part number that you have to engrave or weld onto the pipe. I will definitely inquire on what to do. Changing the pipe wouldn't be my favorite solution as it costs a bunch of money and the cat was fitted with the front pipe and exhaust under the car, and if the front pipe flange does not sit in the OEM location the cat will need to be refit for any other pipe to work. It also usually doesn't need a brand name or something like that, but more something like a part number. Usually for exhaust parts, on silencers and cat units specifically, there is a badge that reads the certificate number that belongs to these exhaust parts under EU regulation. You get these numbers after you put a part or group of parts through the tedious testing according to EU vehicle legislation and they pass. You can find these "part numbers" on various parts throughout a EU vehicle. On windows, headlights, engine parts, seat belts and so on. All these parts have gone through standardized testing and acquired a so called ECE or EG Certificate that makes them legal to use by themselves in all countries that adhere to these standards. You can also not alter these parts in any way, if you do they become illegal. An example for stampings on an exterior lighting part, the people who need to know can find the documentation for this unit in a database. I do not know what all the standards and so on mean.
    • If that was the case I suppose you could call it "Mein's" brand....  ... I'll see myself out... 😅
×
×
  • Create New...