Jump to content
SAU Community

Recommended Posts

started building my car 4 years ago and have been to hell and back with a few shops but finally ended up at a shop i was happy with.

my 4wd wasnt working so i had a full re wire and whatever they did to sort it out. at that time the car was running a 2.7 jun stroker with t88-38gk making 410awkw @ 21psi or there abouts

so being in the workshop i decided to change my plans from street/drag to street/time attack/all rounder, so i made the following changes

- os giken 3L stroker w/ quad plate

- brand new race spec head

- t51r kai bb turbo kit

- hi octane dry sump setup

- ALOT of motec goodness

atm, some basic specs are

- all of the above plus

- ppg 5 speed gearbox

- trust peII 4inch exhaust str8 thru single rear muffler

- 1200hp fuel setup (std fuel tank) 3 pumps, surge tank etc

- motec m800

- motec dash logger

- motec shift light module

- motec knock control

- motec CDI ignition

- defi everything guages

- hypertune plenum, throttle body, n other fabrication

- 150mm greddy intercooler single entry

- tein coil overs with adjustable everything arms/rods/ bla bla bla

- r33 gtr brembo brakes

- nismo gt 2 way rear diff

- tomei front diff

- 19x10 racing harts

- 2x bride cuga seats

- full suede w/bride trim

- dspeed clear corners

- f*k load of other stuff i cant remember

NOW TO THE FUN (not) AND ONCE AGAIN, TIME CONSUMING PART!! which will prob take me a good 6 months depending on work and funds.

i found a r32 gtr rolling shell which ill build up brand new then swap my running gear into it and sell off the old car as a roller.

it will be fully spot welded and stripped and painted with only a dash and 2 front sits with minimal interior, all new rubbers and moulds throughout

its going my favourite colour!!!!!! WHITE AS WHITE CAN BE!!!

new parts/things that im planning to add to the new car

- veilside wide fender kit

- frp front bar with integrated front lip w/ n1 vents slightly modified to fit widebody (have)

- carbon abflug front diffuser slightly modified to fit widebody (have)

- carbon top secret rear diffuser (have)

- forgeline zx3r 18x11 +15 front and -10 rear (21lbs each = 9.5kg!!) (ordered)

- volk te37 superlap 19x10.5 for street (ordered)

- cams/ andra spec 4 point with side intrusion bolt in for now, maybe weld in if i go crazy, wanna keep it street still!

- ap racing custom brake kit 6 piston cp5555 w/ 380x36 front rotor and ap racing GTR rear kit

- dry carbon boot and bonnet (already have)

- dry carbon doors (for the track, std ones for the street)

- dry carbon rear wing

- carbon dash and door trims

- carbon interior parts (custom a&b pillar, rear upper and lower trims near the seat to make it look tidy and a false carbon rear seat similar to the origin ones offered for s13/180sx for the street so it doesnt look so bare) (ALMOST COMPLETE!!)

- ikeya everything suspension arms n etc (ordered)

- new coilovers - still undecided on which ones............

- polycarbonate windows, std front screen (ordered)

- supermade headlight covers with n1 headlights and hid kit

- recaro fixed back for track and 2x recaro sportster CS for street (over bride plus recaro = ADR regs)

MANY MANY HOURS OF PAIN AND HARD WORK!!!

i was thinkin about doin a r34 gtr but not only have i had one of the best ones out there, i love the 32 shape and its becoming vintage as every year passes :D

heres some pics of what it looks like now and the roller ive had sitting in the back yard for an eternity which will start gettin worked on next week. the complete strippping of it will begin and ready for paint.

appreciate ALL feedback and comments and criticism whatever it may be :P

current look

gtr2.jpg

engine bay

32.jpg

interior

Image009-2.jpg

Image008-1.jpg

new forgeline wheels

forgeline.jpg

gtr roller

Image019-1.jpg

Image018-1.jpg

Image023.jpg

thats all i got for now, didnt realise its taken me over an hour to do this haha

Link to comment
https://www.sau.com.au/forums/topic/335704-r32-gtr-time-attack-street-build-up/
Share on other sites

t51r kai is fine, boost comes on early and just rips. many jap time attack cars run t88's so im sure this will do just fine :) its not a dedicated car so to speak so i could prob get better times but then i lose too end which i want for wen i take it to drags n the like, its an all rounder :P im not using that shell anymore, i sold it, i found myself a cheap complete roller which will be a better base ill keep things updated as i go along and get things happening! tryin to get some sponsors on board for a few things

sure is, gotta get stripping and rub the car back so we can fit the kitup hopefully next week and cut the rear fenders,

cage is probably about 3-4 weeks away before it can go in 2 get done, 6 point fixed, cams n andra teched and modplated in qld!!! love it

novake,

other than f**king awesome there isnt much i can say brother lol awesome build dude. i look forward to seeing it grow haha

just a question though, y did u choose to get the kai instead of the spl turbo and also i see u went the carbon dash ah, nice man. im still looking for one for mine. there hard to find though lol.

hey julz, kai bb = less lag, and better suited for wat i wanna do, it will make close to 500awkw on moderate boost on pump and even more on e85 :( and boost comes on str8 away and huge torque with this combo! its crazy! i didnt get to work on it last week too busy, but will start on wednesday :down:

  • 3 weeks later...

hows it coming novak.

ive changed from a gt42 to a to4z in my engine.

and the door trims are getting fitted up next week, took me ages to find someone i can trust to stip my oem doors and fit all the switches and handles to the sunline door cards...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, that was one of the things we learned fast in the past with our MX5. When you drive with the top down, you are effectively standing out in the sun, 100% of the time, and not getting in any shade (because roads aren't shaded generally!). Just like standing out in the middle of a field on a sunny 27C day is a bit of a bad plan, so is sitting in a MX5 without sun protection.
    • I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
    • I would agree, unless you need something specific to the HV motor/battery side repaired or investigated, any mechanic will be able to perform normal services, but if you prefer, maybe look for a mechanic who regularly services/repairs Nissans, the VQ engines are pretty common in the Nissan lineup.  Sorry, I can't make any suggestions, I don't live in Vic.
    • Some of them keep working fine. 9 out of 10 of them end up causing an absolute misery bleeding the system and get thrown on the workshop floor in a tantrum and never thought about again because they were never really needed and just added crap to the car that we could have done without. Same-same with HICAS, A-LSD, and various other stupidities that over eager 10x engineers thought we had to have.
×
×
  • Create New...