Jump to content
SAU Community

Nismo Gmax Red Cover Twin Plate Brand New!

nemesis2187
 Share

Recommended Posts

nemesis2187 Explorer

nemesis2187

Posted
Posted (edited)

hey people up for sale is a complete genuine nismo red cover gmax twin plate with bearings, seals and flywheel bolts.

specs:

Spec II. 8.5 inch, twin plate clutch. 11,277N/m (1,150kgf/m). Pull type.

setup and is suitable for the R34 GTRs and the 350Z's i am told these can handle 700 - 800hp

Reason for sale is that i no longer have any use for it

it was sold and sent to r34aaronw but we both later found out its to suit an r34gtr and 350z as the late r32 gtr and 33gtr's have the 5 speed and the single mass flywheel. he has been refunded the money and the item is on its way back to me.

this is a genuine sale and im an honest bloke hence why i've refunded $1600 to the respected member

Aaron can re-affirm the authenticity of the item and brand new condition that its in

Im after $1600 or will take a S13 complete SR manual conversion and 500 my way

please call me on 0401 366 024 as im not online often

here are some pics

cheers guys,

Ivan.

post-15712-1283893673_thumb.jpg

post-15712-1283893680_thumb.jpg

post-15712-1283893696_thumb.jpg

post-15712-1283893706_thumb.jpg

post-15712-1283893715_thumb.jpg

post-15712-1283893726_thumb.jpg

Edited by nemesis2187
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      Lets play a game - What is causing my oil consumption?

      By Dose Pipe Sutututu · Posted

      I am going to chime in here and say that is very bad advice for a built motor, making decent power of 400kW+ Especially if the rings have been gapped on the looser side. The more power you make the heavier you need your oil to be to be able to maintain that suspension between the moving parts, if not you'll have journals and bearings making love and grenade a motor. Remember that all moving parts inside the motor aren't ball bearing and are journal bearings and require oil to separate the surfaces from contacting.
    • 25RBGT
      Got this r31 silhouette flood car to rebuild.

      By 25RBGT · Posted

      Yeah I noticed this just now. No doubt she will be running smoother next start😂🤣😂
    • joshuaho96
      ENR34 - Leaking Transfer Case

      By joshuaho96 · Posted

      ENR34 manual transmission transfer cases are 33100-23U00 which is shared with all of the R32/R33 GT-Rs and GTS-4s. And the C34 Stagea. Do not bother with automatics, that is a huge effort to swap and the car will be worse for it. And an automatic transfer case does not have the right housing for the shifter which comes out the back of the transmission and goes through the transfer case. I already posted my response on reddit but if you didn't see it there here it is: You have almost certainly damaged the transfer case, the only question is how badly. Nobody can tell you how bad without more information. If you have a giant hole in the transfer case pissing out all the transfer case fluid then you need a new one. If it's not that bad then the only question is whether you burned up the clutches. Drain the transfer case oil and inspect for metal on the drain plug magnet. Small black filings are normal. Big chunks of metal or a ton of black fuzzies not so much. Fluid should be nice and red. Any other color isn't great. If the color is reasonably red and there's not a bunch of clutch material discoloring it or anything like that you probably got away with insubstantial excess wear not worth trying to fix. If you have to rebuild or replace the transfer case keep in mind you have to pull the transmission to get it off.
    • 25RBGT
      Got this r31 silhouette flood car to rebuild.

      By 25RBGT · Posted

      As promised………… the first start. Rough and a few bugs to work out. Still she lives att.1cnTUvrWxiOZUFbg0S43m1VFUdDhxGBq3UU53bvtkww.mp4
    • blind_elk
      Lets play a game - What is causing my oil consumption?

      By blind_elk · Posted

      Can I suggest a 15W50 oil is too heavy. Its a brand new engine - you should be able to run something like a 10W30. Shove some steel wool into your catch can  - more technically "oil/air separator" - so that the oil vapour has something to condense on.
×
×
  • Create New...