Jump to content
SAU Community

Recommended Posts

Here is a plan....

Why do you want 350rwkw, yeh I know you want more power than that other guy but in my mind I would rather have a car with less power that was faster?????

There is nothing worse than beign beaten by something with less power. Take for example my mate in his 180sx...

180@190rwhp = 13.2sec 1/4

R32 @282rwhp = 13.7sec 1/4

I couldn't believe it when he beat me, I have spent heaps more, have more power and yet he beat me.....I don't car cause he's a good friend and I helped him build his car but yousee what I mean. Why not build a car with say 250rwkw (Easy) which will drive better and still be faster than the other one.

Just my 2c worth

Easy...one is setup better....has better mid-range or full range power. Perhaps one has a better matched turbo. My friends S13 with Rb20det and very large turbo and more power than mine is still slower than me cause it has too much lag and its power isn't useable.

Sure, if his is perfectly setup then you have no hope but as less powr is cheaper to build then why not give it a go first.

Originally posted by BOOSTMEISTER

Sorry I am not familiar with your methods of releaving frustration.

But I do know what you mean by saying you have lots of power, just hope the guy in the lane next to you doesn't beat you with less power after you tell him how powrful your car is:D

now that would suck a55

Originally posted by Nismo_Boy

true, but I guess it's the wank factor coming in, you know when some ones asks how power your car has, and you can tell them "340rwkws"......you know what I mean.

Hang a picture of a Keith Black funny car engine in your engine bay, then you can say you have 4000+HP under the bonnet without telling lies.

Also when a car with less quoted HP kicks your ass, there is no come back for that!

(you just gor beaten by a morris minor cause you couldn't get traction).

Oh yeah well I've got 340rwkw!

Also keep in mind, anyone can pull a good dyno figure, just find the highest reading dyno around and roll it up. Here in Perth I've seen 40 rear wheel HP difference's on the same car but different dyno's. The only way you can seriously compare dyno figures is if both cars are run on the same dyno same day.

Rob

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi ๐Ÿ™‹โ€โ™‚๏ธ. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? ๐Ÿ˜ƒ  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this ๐Ÿ™
    • Hi, Marek here ๐Ÿ™‹โ€โ™‚๏ธ. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
    • and it ends up being already priced in as though you're just on 91RON without any ethanol. Car will lose a bit of economy as the short and long term fuel trims bring down the AFR back to stoich or whatever it is for cruise/idle for the engine.  
ร—
ร—
  • Create New...