Jump to content
SAU Community

Recommended Posts

hi all, just wondering what gbox oil were running out there,

im getting a gtr box, the dude said it was starting to crunch occasionally 3rd to 4th at like 8000rmp... (dont ask :S)

ive heard good things about redline shockproof and royal purple.

with the redline would i want a heavy or light?

seems like 75w 90 is a common thickness.

thanx all :D

Edited by chef_stagea
Link to comment
https://www.sau.com.au/forums/topic/336278-gearbox-oils/
Share on other sites

hi all, just wondering what gbox oil were running out there,

im getting a gtr box, the dude said it was starting to crunch occasionally 3rd to 4th at like 8000rmp... (dont ask :S)

ive heard good things about redline shockproof and royal purple.

with the redline would i want a heavy or light?

seems like 75w 90 is a common thickness.

thanx all :D

if you're getting a gtr box and u know it has issues, then why not fix the problem rather than applying a band aid?

shockproof does root synchros. good for straight cut/dogboxes but BAD for gtr stock boxes

do yourself a favour - take the box to a trans workshop, get the synchros fixed and check out the gears for stress

-D

Link to comment
https://www.sau.com.au/forums/topic/336278-gearbox-oils/#findComment-5439919
Share on other sites

I always have heard NOT to put shockproof in because it ruins syncros.

Im running Castrol Syntrax 75w90 in a RB25 box.

I've been told the same thing and read it on forums. I spoke to Shaun at Boostworx only yesterday (want to do both diff and gearbox) about this and he's assured me that this is what they use and recommend for gearboxes.

Link to comment
https://www.sau.com.au/forums/topic/336278-gearbox-oils/#findComment-5439987
Share on other sites

I've been told the same thing and read it on forums. I spoke to Shaun at Boostworx only yesterday (want to do both diff and gearbox) about this and he's assured me that this is what they use and recommend for gearboxes.

I'd rather believe a pro, than forum 'experts'.

:cool:

Link to comment
https://www.sau.com.au/forums/topic/336278-gearbox-oils/#findComment-5440000
Share on other sites

I'd rather believe a pro, than forum 'experts'.

:cool:

Same. My mechanic however said the same thing as forum experts about the Shockproof (aka smurf poo) - said its notorious for wearing out synchros and then explained to me why

And considering how shagged my box is, I'm not surprised. Been using good quality mineral oil since and while I do have issues with the synchros, it hasnt gotten progressively worse

Even Redline themselves say on the website 'not to be used with synchromesh gearboxes'. so yeah. believe the company or believe the tuner? I know shaun knows his stuff but I personally would never use it

-D

Link to comment
https://www.sau.com.au/forums/topic/336278-gearbox-oils/#findComment-5440027
Share on other sites

I have got redline shockproof lightweight after trying the castrol in my r33. It didnt fix the crunch from 1 to 2 but it did make it alot better. It only has a slight crunch every now and then

Link to comment
https://www.sau.com.au/forums/topic/336278-gearbox-oils/#findComment-5440114
Share on other sites

After asking around about the shockproof stuff, sometimes it can be too thin, and feels like there is is no "resistance" in the gearbox, almost "too quick".

Ive got some Castrol Syntrans 75w-85 in my 20 box, feels nice.

Link to comment
https://www.sau.com.au/forums/topic/336278-gearbox-oils/#findComment-5440841
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Half anticipating the next question then: I have two magnets stuck in my oil pan. What should I do? 
    • If it's magnetic what is stopping you from using a magnet on a thin wire from fishing it out?
    • Those 2 solenoids in that assembly I mention, are the PWM solenoids for torque converter lock-up clutch & EPC (line pressure control) ~ when most folks hear of 'solenoid failure', the tendency is to think electrical failure...but fact of the matter is, especially wrt the EPC solenoid (which is moving/running all the time), you can have an electrically 'good' solenoid, that's absolutely broken/worn out mechanically inside...ie; valve plunger return spring rubbing against spring retainer plate, lowering preload pressure.. ...and the solenoid armature extension limit spring wafer with bad wear/broken off petals... ...and if there's ever been any metal flying about, damage to the valve plunger end itself... ...the stuff one never really sees, unless you go the whole 10yards trying to answer the question "why is my line pressure screwy, but TCU isn't flagging any EPC solenoid fault?"...and carefully dissect the solenoid. Worst (and most probable) scenario is when the plate spring petals break off, they get held by the magnetic flux, get mashed up by the armature into little bits, which end up in the space between the armature & shading core bore, and things get stuck or randomly jam up, and your line pressure goes flat and doesn't change...and the TCU never sees it, as it doesn't actively monitor LP... ..then it gets into insidious land, if you end up with lower than expected line pressure...lets say high clutch..and the lower pressure causes it to slip ~ when I say 'slip', think say 2000rpm on the drive plates, and 1800rpm on the driven plates, because the slip is making them under-rotate by 200rpm ; you get all the usual nasties like heat and band/clutch wear, but even if it's only 20rpm slip the same thing happens...and... you'll hardly ever pick this up driving the thing with the torque converter active as it effectively masks these sorts of slippages that are line pressure related ...(the newer TCUs can detect clutch slip rate)...just  FYI as it were...  
    • There's nothing that some paddle pop sticks and extra cable ties can't fix.
    • Hey guys, so Golebys has good prices on Bosch injectors, and also sell an adaptor to go from 1/2 length injector to standard with the Nissan 10.5mm top seal.  Does anyone know if that adaptor is to suit the 14mm or 11mm injector tops?  And re. The bottom seal, to suit my standard RB20 intake, would I be right in saying I can just slip the 14mm square section O ring over the bottom of the new injector and done? Thanks in advance guy, Cheers, Rowdy
×
×
  • Create New...