Jump to content
SAU Community

Tomei Poncams Type B In Rb26dett From Bnr32

sanekecr

By sanekecr,
in Engines & Forced Induction

 Share

Recommended Posts

  • 3 weeks later...
XRATED Veteran

XRATED

Posted
Posted
HI! I want to install Tomei poncams 260\9.15 on mine rb26dett (r32). the motor completely the standard. What is required for correct work of the motor? Describe please all process in detail.

Take it to a mechanic....

They are designed as 'drop in' camshafts. There are no other parts required to do the job.

I would suggest replacing the timing belt and installing adjustable cam gears (if you want to go that way) as the same time. If your going the replace the cam belt, replace the idler pulley and the rocker cover seals.

Justin

djr81 Grand Master

djr81

Posted
Posted (edited)
Take it to a mechanic....

They are designed as 'drop in' camshafts. There are no other parts required to do the job.

I would suggest replacing the timing belt and installing adjustable cam gears (if you want to go that way) as the same time. If your going the replace the cam belt, replace the idler pulley and the rocker cover seals.

Justin

Yes there are. You need to re shim the valve train to get the clearances right. So at minimum you need spare shims for that.

Also, if the motor is standard you are wasting your time installing type B Poncams as it won't improve performance in any meaningful way, just reduce midrange torque. If you must change cams the type A are a far better bet.

Edited by djr81
djr81 Grand Master

djr81

Posted
Posted (edited)
And a lil tip I learnt on Wednesday nite when I was on the dyno, set the zorst timing to 0 don't advance it or it will b laggy as

The exhaust cam on the Tomei's actually opens at 65 BBDC - the same as the stocker.

Actually the difference between the A & the B's is all in the exhaust cam - it has an extra 8 degrees duration on the B, ie 260 rather than 252.

Edited by djr81
DVS JEZ Grand Master

DVS JEZ

Posted
Posted
The exhaust cam on the Tomei's actually opens at 65 BBDC - the same as the stocker.

Actually the difference between the A & the B's is all in the exhaust cam - it has an extra 8 degrees duration on the B, ie 260 rather than 252.

That would make perfect sense. When i tuned deano1s GTR on wednesday Pulse had the cam timing all wacked. Inlet Was retarted Nd exhaust advanced. We set it all to 0 and made and extra 25kw and gained 60kw in the midrange.

Full boost was 5500 and now its 4300. 19psi.

R.3.2.G.T.R Grand Master

R.3.2.G.T.R

Posted
Posted
That would make perfect sense. When i tuned deano1s GTR on wednesday Pulse had the cam timing all wacked. Inlet Was retarted Nd exhaust advanced. We set it all to 0 and made and extra 25kw and gained 60kw in the midrange.

Full boost was 5500 and now its 4300. 19psi.

what turbo is deano1 running?? worthwile mod for gtr running gt-ss pushing 300rwkw?

DVS JEZ Grand Master

DVS JEZ

Posted
Posted
what turbo is deano1 running?? worthwile mod for gtr running gt-ss pushing 300rwkw?

Deano 1 is running his stock N1 turbos. Steel wheel obviously.

People have made lots of power on stock cams. I think close to 600hp. But with big ass turbo's.

My car has the same turbos as deano s but with stock cams, mine is more responsive but doeant have the top end as deanos.

My car made 285rwkw

deanos made 300.2kw

DVS JEZ Grand Master

DVS JEZ

Posted
Posted
How much boost? Im making 280rwkw, factory cams with GT-SS's on i think 16psi

Deanos is on 18.4psi 11.2afr.

Mine is on 18psi 11.2 afr. Both have really safe ignition. And as u can see reqlly safe afrs

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Shoota's R33 GT-R RB30/26

      By MBS206 · Posted

      It only looks tidy, as most of the stuff that was on the whole back wall, is now in the trailer to go to the tip, or has been shoved in my 2.2x2.4m "Spare parts room", and now I can't get to anything in there Ha ha ha I could definitely do with a bit more space, but I'd just end up with your problems I'm going to enclose the car port beside the garage, and move a lot of stuff into it I think. OR... It will be setup as a fabrication area, and the main garage will have parts storage in it. I'm not sure yet... Need some pictures of that big shed you've got with the bikes and Skyline in
    • PranK
      My BMW 335i

      By PranK · Posted

      No. I think it's gone. 😭 I think you can get body coloured ones on eBay so I think I'll get one of those... Or just hang a red ribbon from the hole and whack a TOW sticker next to it.
    • Milkmun
      Cleaning my wheels 😍

      By Milkmun · Posted

      Can't say I've had a bad experience with one on my car, then again it only gets washed once or twice a year... The wheels on the other hand, get a good spray often due to my shitty dusty pads.
    • Shoota_77
      Shoota's R33 GT-R RB30/26

      By Shoota_77 · Posted

      @MBS206 thats pretty neat and tidy to me!  I'll get a photo of mine when I'm out there next. It might require multiple photos to understand the scale of the atrocities though... In total I have 4 sheds of varying sizes and layouts. Main shed is 14x8, second shed is 3x8, third shed is 11x2.5, fourth shed is around 6x4.  All are pretty much full.   The main goal of my cleaning tsunami is to make the main shed predominantly car and motorbikes only. Second shed is my metal fab room (2 x bench grinders, drill press, bench belt sander, metal band saw, scrap metal storage and some of my garden tools.  3rd shed is more bigger garden stuff, storage for engine crane, jack stands, concrete grinder, concrete mixer, air compressor lives there, and it now has two 2mx2m pallet racking shelves with itemised boxes holding building stuff, electrical stuff, plumbing stuff, etc, etc.  The 4th shed is Ryobi electric ride on mower, mini boom sprayer, ancient Kubota tractor, more garden stuff!  I have got a lot of shit....  Then there's the pool house (8mx4m) and the pool pump shed (4mx4m).  I built all of the sheds over the 11 years we've been here.  The main shed was a Ranbuild kit, the rest are all custom made to fit the areas available. Building the main shed taught me a LOT as I had no idea about building anything prior to that!  I've still got one more in me. It will be my man cave which I poured the extra concrete for way back when I poured the concrete for the main shed. The idea is the Skyline will be a centre piece of the main cave once (if...) it's finished.  I told my now 14 year old son yesterday that I will 100% drive him to his year 10 formal in 2 years. Still a long way off but at least I now have a date to work towards! 🤣
    • niZmO_Man
      Duncan's V37.......race car?

      By niZmO_Man · Posted

      Modern oils are amazing. Add tyres to that as well.
×
×
  • Create New...