Rb25det With Gt47?

[spooledup]

has any1 attempted to put a garrett gt47 turbo on a rb25? looking at putting 1 on once ive done a bit of work to the motor..

[-_-StRyDeR-_-]

lag? lol

[GTScotT]

That is a massive turbo, if your going something that big you should either know what you are doing or be taking the advice of a GOOD mechanic.

No offense intended mate, but this sort of question is not one that needs to be asked... You are looking at a turbo capable of over 1000HP.. Which in turn will be a $xx000 engine setup. Note both numbers are missing, meaning I dare not assume it will be under 20 or even 30.

Just to put things into perspective, a 35R can run a 10. So the question is, what do you hope to do with a GT47?

[Trozzle]

Get the chix

[Mr Jollwah]

get som mass dose

Gt47 on RB25 with a BIT of work!! LOL

Edited September 13, 2010 by Mr Jollwah

[The Dan]

Don't take on a setup like this unless you have $50,000 to spend. This $50k can be spent two ways:

1. Really good setup with all the correct parts and advice and you'll do 9's all day. You won't crack 8's because you need the chassis set up properly and the cost doubles

2. Buy all the cheap shit parts around to get it to work and spend $50k fixing your setup for every time it breaks

[jangles]

take a look at the mercury motorsport nitto, it has a GT47 on a built 2.7l RB26, can only imagine its a LOT more work to get it performing on a 25.

There is no reason why it wont go on a RB25, but for it to work effeciently is a whole different story

Edited September 13, 2010 by jangles

[Harey]

take a look at the mercury motorsport nitto, it has a GT47 on a built 2.7l RB26, can only imagine its a LOT more work to get it performing on a 25.

There is no reason why it wont go on a RB25, but for it to work effeciently is a whole different story

Yup thats what I was going to say, talk to mercury motorsport. I believe they use nos to reduce the lag, plus a fully designed setup with lots of experience in big power cars.

[James_03]

I think you meant to go here:

www.calaisturbo.com.au

Honest mistake.

[Lucy The Skyline]

Yup thats what I was going to say, talk to mercury motorsport. I believe they use nos to reduce the lag, plus a fully designed setup with lots of experience in big power cars.

No reducing the lag on a GT4788. But if anyone would know about bolting a stupidly big turbo onto a RB trent would be the guy to talk too.

[WHITER33GTS-T]

Stick it on and see how you go. lol

Or sell it to me cheap so I can strap it on a 454 Impala.

[Rolls]

looking at his other posts I can tell this is going to be a disaster.

[joeyjoejoejuniorshabadoo]

pfft... too small....

chunk on one of these if you have some balls

[Adriano]

Wonder what bolt pattern that flange is?

[The Dan]

Wonder what bolt pattern that flange is?

You wouldn't be able to use it anyway, it's a water pump

[GUN_METAL_GTR32]

47 on a 25 .. goose.

my 26/30 will be running a gt42 and i reckon that a tad ovakill, couldnt imagine it with a 47 and an even smaller engine lol

[Nee-san]

You wouldn't be able to use it anyway, it's a water pump

ahahahaha Yup.

[R31Nismoid]

47 on a 25 .. goose.

my 26/30 will be running a gt42 and i reckon that a tad ovakill, couldnt imagine it with a 47 and an even smaller engine lol

Oh come come now - you can't really call him a goose given some of your recent posts!

[bozodos]

haha pwnd.

To the OP, I'd like to see it done tbqh, so I wish you luck, though it's not something I'd waste that much money on personally. I like the idea of massive lag and spastic power... just not on my own car

[FineLine]

To the op, change your user name because you will never see it.