Jump to content
SAU Community

R32 Gtr Grey 500+rwhp Snappy Street Car

kil-351

By kil-351,
in For Sale (Private Whole cars only)

 Share

Recommended Posts

kil-351 Enthusiast

kil-351

Posted
Posted

For Sale? Or Wanted?*

FS

Price/Amount

$30,000

Open to Swap?

No

State

NSW

Short Description for title?

R32 GTR snappy 500rwhp

Currently Registered?

Yes

Transmission?

MANUAL

REGO/VIN Number?

KIL-351

Contact Info Other than this Forum?

0434778285

Description

selling my gtr as i need the money for something else.

Recently painted in a custom silvery colour as in my avator

brand new maatouks rb26 combo good for 1000hp

pistons/rods/head/cams/studs/ all the **** you need to run 8's

6boost manifold with a polished gt35/40

2x044's with a magnafuel reg and billet rail 1600cc injectors

microtech lt12s

nismo diffs

hks shocks all round

front and rear sway bar

r33gtr drivers seat

no stereo in the car

10 months rego

has braided brake lines, bendix ultimate pads, new rotors to pull it up.

comes with 2 sets of rims and tyres for street and circuit

car currently makes 320rwhp on 9 pounds of boost

will tune the car on e85 after jambo with as much boost as i can, id say 30 pounds every day to make around the 500 mark.

car comes on nice and early, smooth, starts first or second kick every time.

nismo twin plate clutch with new clutch plates

reason for selling is i need the funds for another project and there no more room in the garage.

Car is going on the dyno today or tomorrow

$30k - offers welcome

julian 0434778285

av4qqe.jpg

20jb4h.jpg

kil-351 Enthusiast

kil-351

Posted
  • Author
Posted (edited)

sydney area 0434778285

please phone me if you are serious.

more detailed specs of the car will be given to those that are serious. For those that know, my last car ran 8.2 at 168mph and this engine had no short cuts just like the last one, only difference being the turbo size, and 26 head, my last combo was an RB30. Built and tuned by the same person who knows his shit.

With a turbo change this car has the potential to run well over 155mph, as it was intended for this though i only put a 35/40 on it to have some fun on the street.

Dont be fooled by people claiming 400awkw on 20pounds etc etc.. get in it and fell it, i dare say most people dont know what 400awkw feels like to say their car makes it (exclusions to those that know their shit)

this car in its current state will go mid 10's on pump fuel at over 130mph no questions, dont worry about the dyno sheet, always check the mph/weight ratio!

Edited by kil-351
dirty thimble Enthusiast

dirty thimble

Posted
Posted

2 massive pics of some painter guys and their van with a glimpse of a gtr in foreground.

Got any other angles of the car and engine/interior?

Btw car looks decent

GUN_METAL_GTR32 Grand Master

GUN_METAL_GTR32

Posted
Posted

awesome car bro

just a quick question y do u have 1600cc injectors when ur engine/power combo dont really call for anything larger then 800-1000cc ???

def get some engine bay pics up

GDZ-14R Rising Star

GDZ-14R

Posted
Posted
awesome car bro

just a quick question y do u have 1600cc injectors when ur engine/power combo dont really call for anything larger then 800-1000cc ???

def get some engine bay pics up

Read the add you goose. Preparation for E85.

Maatouk certainly can build em, best of luck mate.

kil-351 Enthusiast

kil-351

Posted
  • Author
Posted

yea its tuned on e85

forgot to mention it has several months rego

fuel set up consists of surge tank, pre pump + 2 x 044's.. enough to get this car into the 8's with a turbo change

  • 2 weeks later...
kil-351 Enthusiast

kil-351

Posted
  • Author
Posted (edited)

27.5k.

will consider parting out as i need the shell gone at least so i can garage a new car.

will sell long engine / complete turn key engine separate

if you're looking for more power, i can sell the engine turn key with a t51r making 650 - 700 to the wheels tuned by maatouks as i have a few spare turbos, though for the street the combo it has at the moment is unfair! boost under 3000rpm and 500 to the wheels!

Edited by kil-351

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      gauge needle removal

      By MBS206 · Posted

      Google says for a 1998 Nissan Maxima to pull/pry, and the metal pin might even come out with it. I'd do a bit more googling, there was a few videos, find some where the shafts/needles appear most similar and compare the techniques.
    • Predator1
      FS - RB30 Turbo upgrade bolton turbo kit - 600kw

      By Predator1 · Posted

      Details: Turbo Borg Warner EFR 9180 with 1.05 rear housing Upgraded TurboSmart integrated BOV Sanded and powdercoated compressor cover in gloss black Elbow welded with wiggins clamp Speed Sensor(Not included) (Can include oil drain(heat wrapped + titanium intake pipe with almost new filter for a tad extra). Manifold: 6 Boost RB26/30 twin scroll manifold  e-MAP ports drilled into both scrolls(I was using the TAARKS EMAP KIT) Turbo is in excellent condition. Always used Penrite 15w50 Racing oil(Changed less then 2000ks). Also using the Turbosmart OP regulator and filter. Downpipe: 4inch Stainless steel with VBand inlet and outlet clamps(included) Heat wrapped Dual ports for Dyno/Wideband usage Will throw in free 2.5 inch intercooler pipe(2.5inch From turbo outlet to 3.5 inch intercooler) - Powder coated black. Turbo made 563rwkw on mainline hub dyno at around 24-25psi boost - Pump fuel. Will def make over 600kw on e85. Didn't bother as my e-MAP was through the roof with my setup sitting past the choke line. I have a cnc ported and fully built head on my 3.2. Turbine speed saw max of around 109k rpm. I'm running this on my R32 GTR, with AC, and the original power steering pump. The manifold clears the AC lines, ABS, and everything else. Although I had new AC lines because I just wanted new ones and I heat wrapped them as well. This will make more power on a slightly lower capacity motor with a higher PR. And I have since upgraded to a G45-1500. Have pics and videos if need be.  Absolutely nothing wrong with setup. Turbo is in perfect condition. No shaft play or oil leaks at all. All the work was professionally done. The transient response of this is fkn amazing. I cannot rave more about this turbo. If I wasn't chasing 4 figures, I would have kept it. $5000 NZ. Located: Auckland, New Zealand.    
    • PranK
      ATCC Amaroo Park 1987

      By PranK · Posted

      I particularly like the look of the John Player Special team. (Thumbnail isn't different but hit play for the clip)  
    • PranK
      ATCC Amaroo Park 1987

      By PranK · Posted

      Such a cool collection of cars back then.  
    • PotatoCake
      R33 nismo cluster

      By PotatoCake · Posted

      Mystery solved, thanks bro Bit of a strange mix, but i dont mind it, still looks good. 
×
×
  • Create New...