Jump to content
SAU Community

Recommended Posts

Hi Guys,

I know the getrag have been covered quite extensively, but so far i have not come across any threads that i can find on the issue.

Went to my mech to top up additional RP Synchromax of 1 ltre from the side ( the gearbox itself) as previously the supplier ran out of RP.

Driven the car for about 30 mins from my place to the workshop, mech jacks the car up and loosens the drain plug. He is absolutely surprised as to why the oil is draining out as previously he only filled in 1 litre in and it should not be draining out as the level of oil is only half ( He put his finger in and felt its half full)

As he previously have seen the GETRAG boxes opened up, he realized there is a connecting hole from the transfer case to the gearbox. Ie anything more than 2 litre that is filled from the gearstick, excesses will be flowed into the gearbox section.

Im just wondering if this is true ,and if anyone has completely drained all oils ( from transfer case and gearbox) and fill the full 4 ltrs of oil straigt into the gearstick. It was abit notchy before i reached there, but once the full 4 litres is filled in from the gearstick, i do realize gear change is very smooth.

Any similar experiences from you guys?

Thanks

Link to comment
https://www.sau.com.au/forums/topic/336888-filling-the-6-sp-getrag/
Share on other sites

i didnt know the gearbox shared the same oil, r34gtr i worked on recently has seperate fills. redline yellow in the box and redline aft in the transfer.....

the fact that both oils are probably red in your car, you could have no oil in the box.... and way to much in the transfer.

i didnt know the gearbox shared the same oil, r34gtr i worked on recently has seperate fills. redline yellow in the box and redline aft in the transfer.....

the fact that both oils are probably red in your car, you could have no oil in the box.... and way to much in the transfer.

Yeap, they share the same oil, to add to that, when we drain the oil from both gearbox and transfer case, they both had the exact same color and oil thickness(very subjective though). And yes the colors are red from factory.

If (currently) there is absolutely no oil in the gearbox, should i be experiencing a very notchy feeling?

Didnt fill in any oil from the side, all 4 litres is filled from gearstick, the connector hole will overflow the excess to the gearbox.

You 100% sure about that? the transfer should have auto-transmission fluid in it..

The transfer is using an ATF specification fluid, ie the RP Synchromax.

Just need to know if, filling via the gearstick really does overflow to the box and will overflow the right quantity.

You do realize, when you are filling through the gearstick with a GTR, you are filling the transfer case, not the gearbox as what would happen with a RWD skyline?

Also the notchyness can be attributed to not using the proper fluid for the Getrag box as it expects ATF fluid (V160 from Toyota, same as what used in the Supra's 6 speed Getrag) not a gear oil.

You do realize, when you are filling through the gearstick with a GTR, you are filling the transfer case, not the gearbox as what would happen with a RWD skyline?

Also the notchyness can be attributed to not using the proper fluid for the Getrag box as it expects ATF fluid (V160 from Toyota, same as what used in the Supra's 6 speed Getrag) not a gear oil.

Yes, i realize im filling the transfer case, and im sure the fluid is proper (RP Synchromax) and the notchiness is only prior to the oil change.

After the change, its smooth and alot better.

However, the issue to note here is if by filling the full 4 ltres in the gearstick, will that 2 litres be flowing over to the gearbox, as the mechanic have sworn when he opened up the gearbox, there is a connector hole between the transfer case and gearbox,

as already stated when filling through the shifter you are filling the transfer. there should be a seperate fill and drain for the box.

Yes, i realize im filling the transfer case, and im sure the fluid is proper (RP Synchromax) and the notchiness is only prior to the oil change.

After the change, its smooth and alot better.

However, the issue to note here is if by filling the full 4 ltres in the gearstick, will that 2 litres be flowing over to the gearbox, as the mechanic have sworn when he opened up the gearbox, there is a connector hole between the transfer case and gearbox,

just had the transfer case off the R32 GTR and it's completely sealed from the gearbox. There is a hole in the back of the box but it goes into the space between the box and the transfer case where the g'box oil lubricates the driveshaft connection in to the transfer case oil pump. This space is still sealed from the transfer case itself.

Here's a pic of the plate that separates the case from the box. The top hole has a seal and is for the striking rod, the one below has the oil pump for the transfer on the other side and the driveshaft from the box goes in here, the other is for the front drive shaft.

hope this helps

post-48345-1284585498_thumb.jpg

The transfer on this gearbox should be 2 sealed units separate from each other. Which is why they have 2 separate fill and drain plugs. There is no connector hole. They should have a breather on top of each unit

This is however a Getrag - different to our R32 / R33 5-speeds.

Seeing that is uses ATF instead in the gearbox instead of gear oil it is conceivable that the Getrag has a connection between the two.

Maybe PM someone like Snowman - I know he has dealt with the 6-speeds.

maybe the seals on one of those connecting holes is blown.

btw why did a "mechanic" put more than 2l of oil in a transfer case?

Thanks for the reply guys, when the mech tried to add in more oil at the side, (via the fill plug) oil is already leaking out, his explanation is that it shouldnt as previously when he opened the fill plug, the oil is still below the mark, it shouldnt leak out.

He put more than 2l of oil in the transfer case because he is under the impression that the oil will flow into the gearbox once the transfer is full.

He put more than 2l of oil in the transfer case because he is under the impression that the oil will flow into the gearbox once the transfer is full.

i think you'd want to know that he's absolutely 100% certain about these things, rather than "under the impression"

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The hot exhaust light will come on not from just the cat being blocked, but it's just a temp sensor, and it's designed to warn you to not do things like park in long grass.   If you've been pushing the motor a bit, it can cause the light to come on.   Second if the cat is rattling, I'd suspect it's not blocked, but instead falling apart inside.   The easiest "fix" until you can get a cat put back in, is to unbolt your one, bash the rest of the insides out, and then bolt it back in.   For a daily driver/street car, I am in agreeance of put a cat in the car. If it were race car I wouldn't care if it were removed.
    • No worries at all 🫡 I think the most satisfying things to make are the little bits that are just impossible to find or they're no longer manufactured. Generally I always try to replace parts with OEM wherever possible. This little project is also great because it'll never see the light of day, but strengthen these brackets so it's not just relying on the little standard screws in the headlight plastic. As soon as I saw the standard brackets and screws I thought, "well I'm not going to install with just the screws, the plastic tabs will just snap off". It's crazy how expensive everything has become yeah. But I suppose that's supply and demand; granted it's a lot easier to get brand new genuine parts these days which is fantastic 😊, I don't have to get totally reamed at the local Nissan dealer ha ha We sure are lucky we have all these manufacturers making parts these days, a few really great Australian companies too like Platinum Racing Products and Fit Mint Automotive, what a time to be alive ❤️ . I've got my eye on the RB26 head by PRP as mine has a very fine hairline crack, so that'll need to be addressed some time in the future. If you have any requests or odd things to make feel free to let me know and I can have a crack at making replacement parts ✌️
    • Thanks for sharing this, and BTW if your headlights are in good condition they are worth thousands....you might want to consider replacing them with brand new LED ones like this (https://www.nengun.com/78works/full-led-headlights-r32-skyline) and making enough profit to buy a house in Sydney
    • I'm not sure what sort of shops are nearby, but I'd expect any reasonable exhaust shop could put a cat in it that will not restrict the power that engine makes. Otherwise, if you want to remove it, short lengths that replace the cat are readily available online, search for "de-cat pipes" or "test pipes"  
    • Howdy friends, So another weird one today, I was looking into replacing some broken clips holding the front grille for the R32 GTR (part number 01553-03831), and noticed the brackets which are supposed to hold the grille in place were also missing 😑. I do recall seeing this issue many years ago, but didn't fix it at the time. A quick look on eBay and I was able to find the genuine brackets, along with all the screws which suited the headlights (part numbers 26042-08U05,26092-08U05). Happy days!....  Once they arrived however there was an extra nut in the packaging which implied that there should also be a bolt or a stud, and sure enough, after a bit of searching I found this thread from 2013, and @Ants clearly shows a stud should be present. Reading around a bit more, it's possible the headlights on my car are the "povo pack" headlights as mentioned by @funkymonkey in this thread way back in 2008. This could explain why the studs are missing on my set of headlights. Looking at the headlight diagram I wasn't able to see a suitable part number for the stud itself. The headlight did indeed have a recess that looked like it would accept a stud, but interestingly no thread or anything obvious how the stud would be affixed to the headlight, I suspect it may have been glued in, press fit, or melted into the plastic at the factory. Another member may be able to clarify if they happen to have a genuine set of N1 headlamps. The only thing we have to work with within the recess is a keyway which likely is there to prevent the stud from rotating within the recess. In any case, back to 3D printing, I put together a model which acts like a pug with a friction fit inside this recess, making use of the keyway so it doesn't rotate while tightening a bolt. Printing in TPU will allow it to slightly swell making a nice snug fit without cracking the part. I've designed the adaptor it to accept an 20 mm M6 bolt (stainless with a cap head in my case), as opposed to the standard M5 stud and I made use of the standard galvanised split washer that came with the genuine brackets from Nissan. Once the bolt and screws were all in place, giving the bracket a gentle shake gave the classic "shaking the car" feeling, very solid, which gives me confidence this is going to be able to hold on much better than the janky solution which seems to have been here for the past decade or so. Overall I'm really pleased with how this turned out and maybe there are more people out there running these headlights without a centre stud at all! Link to the freely available model on Printables: Click here Regards, Sean  
×
×
  • Create New...