Wheels 20"

[dalton]

looking at getting some 20" on the NM35

http://cgi.ebay.co.uk/20-ALLOY-WHEELS-TYRE...=item1e5ceea7fe

like these think they will o on can any one confirm this ?

do i have to get the same size tiers on or would that size be OK

[KiwiRS4T]

Staggered fitment 8.5in front and 10in rears may cause problems for your Attessa. Can you fit 20 x 10in inside your guards? Yes you will need tyres that big and they will not be cheap.

[dalton]

Staggered fitment 8.5in front and 10in rears may cause problems for your Attessa. Can you fit 20 x 10in inside your guards? Yes you will need tyres that big and they will not be cheap.

i dont konw think i will have to see if i can have a test fit somewere ? for the attessa do they have to be the same

[JayM35]

i dont konw think i will have to see if i can have a test fit somewere ? for the attessa do they have to be the same

Yes, same width/rotating mass front and rear or attessa throws a hissy fit.

20x10 should fit, just go to your local mag dealer and say you're interested and they will test fit some on your car to give you an idea.

[bbenny]

Fronts will fit fine, but your rears will stick out the guards at 10" +35 offset. For the rears you will need +45 for a perfect fitment - I tried 8.5" up front with 10" on the rear on my M35 but my attessa went nuts, now I have 8.5 all round with the correct offsets and no problems.

The ideal size is 9.5 with a +35 offset all round.

[dalton]

so will i have to keep the width of the tyre's the same as well ? and same profile ?

[bbenny]

so will i have to keep the width of the tyre's the same as well ? and same profile ?

To save yourself a lot of hassles, run the same size rim and tyre combo all the way around.

[lachlanw]

or you if passed 5th form maths you can put what ever rims you want on it . you have 2% difference in circumfrence (lol at "rotating mass") to play with .

[M I K E]

haha first i've heard for rotating mass

just make sure the rolling diameters are the same

[260rsstagea]

yeah its all about rolling diameter on my 260 i run 19x8.5 front and 19x9.5 back with 225 tyres front and 245 back and i have no dramas

[PetroDola]

Yeah im coming across the same problem shopping for 19's .. saw these nismo 5 spokes but they aint cheap $3500 a set discounted $900.

http://www.importmonster.com.au/shop/produ...roducts_id=1046

tossing up whether to get them or not..but theyd look shit hot on my silver m35

[PetroDola]

bah dead link, and havent been able to edit for months.. in fact if i have to post i have to log out first for any browser or machine. forum has shocking coding.

http://www.importmonster.com.au/shop/produ...roducts_id=1046

[PetroDola]

Edited September 18, 2010 by PetroDola

[PetroDola]

omg finally found the stupid switch in the rss feed.

[dalton]

yeah its all about rolling diameter on my 260 i run 19x8.5 front and 19x9.5 back with 225 tyres front and 245 back and i have no dramas

how do you work it out is there a format to working the rolling diameter out

[iamhe77]

how do you work it out is there a format to working the rolling diameter out

Yep, this one should be about all you need.

Rims and tyre calculator

[bbenny]

I dunno about the 2% range for difference in circum. At least not with the M35's atessa. I had no probs with staggered on my C34 or R32 but for some reason the same doesnt work on my M35. Had nothing but probs with staggered wheels. It might have just been my car, but I have read similar problems from other M35 owners...

[dirtyRS4]

Try this, 1010 tyres. Recommended to stay within 3%. You might want to put hitting coilover issues into the equation. 20's, lol.

Edited September 19, 2010 by dirtyRS4