Jump to content
SAU Community

Recommended Posts

r32, r33, r34 gtr rims will all fit

i think anything off an r32,33 or 34 gtst, gts25t or gtt will fit as they have 4 pots standard

also should be able to fit 300zx wheels and 350z wheels

Link to comment
https://www.sau.com.au/forums/topic/337021-rs260-rims/#findComment-5449670
Share on other sites

r32, r33, r34 gtr rims will all fit

i'm 95% positive that the factory 16x8 32gtr rims won't clear the r33gtr brembos found on the stagea

and if it's width that is the problem for roady, you won't be able to use r33gtr or r34gtr wheels as they are both 9" wide. but either will fit no worries

Link to comment
https://www.sau.com.au/forums/topic/337021-rs260-rims/#findComment-5449706
Share on other sites

Yeah thats what i figured. i cant find anyone close that has a standard set of rs260 rims. I know of 3 in Canberra 1 which is mine, one that has gtst brakes so no good and its got r33 gtr rims on it.

There is a black one I saw at the last dyno day at ESP Racing but didnt/couldnt find the owner.

I only need the rims for one day so if anyone know let me know!

Link to comment
https://www.sau.com.au/forums/topic/337021-rs260-rims/#findComment-5449959
Share on other sites

Actually. you only need a set of 17" rims right? Doesnt need to be the original autech. As long its the same size as the original specs for the 260rs its useable for the compliance. Soz i just taught of it. hope this will help.

Link to comment
https://www.sau.com.au/forums/topic/337021-rs260-rims/#findComment-5466943
Share on other sites

if your in Melbourne you can borrow my standard 260RS rims, i have a set of R34GTRs that i use for summer and the stockies i use for winter (chains for snow trips) so if you'd like to borrow give me a bell 0419366897

Link to comment
https://www.sau.com.au/forums/topic/337021-rs260-rims/#findComment-5467355
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would paint match the whole thing to avoid unwanted attention  I had a similar bonnet, paint matched, on my old R33 GTST, but mine was a fibreglass jobbie made by Blitz in QLD, they work extremely well for radiator efficiency and under bonnet temps
    • Does anyone run this kit with factory plenum? Does the adapter and bosch tb fit under factory strut brace? I wanted to get this setup before going forward facing manifold. Thanks
    • small update time, after always wanting a "cool" looking bonnet for my car and always struggling to find one for the series 2 that i liked and wasn't an insane amount of money. Saw one i liked on RHDjapan from D-speed in Japan the price was very good for a carbon bonnet so good infact i was a little unsure how much i trusted it, decided to bite the bullet and with the help of jesse streeter in not long at all it was at my door. Once it was delivered i ran in from work and quickly unboxed it and to my surprise the quality was actually pretty good i quickly removed the old bonnet and placed on the new one to test it out and even the fitment wasnt too bad at all. Then decided to paint the little grille in the bonnet black to stop it sticking out so much.   I decided to not mess around with the hood latch and just install some aero catch hood pins, having never installed them before did some YouTube university classes and i was good to go. fair to say it is not a fun job at all from making brackets so the pins sit nicely and actually cutting through the bonnet but also being very scared of cutting the holes too big it took wayyyy longer than i would like to admit but finally got it there. Then it was time for a quick test drive to ensure the latches actually worked and thankfully the bonnet looked very stable. I still think paint matching the bonnet and leaving just the part that sticks up as carbon would help make it all look alot neater as im not sure how i feel about all that carbon on a very fridge white car but will leave it as is and see how i feel with time.  
    • I think it's bound to happen, you finally get it all perfect, and bam, something will happen. I took a while to get a Commodore rear quarter repaired where a P Plater clipped it. Two days after getting it back, Sarah wiped it out on a concrete pillar in an underground car park... This is why I take forever to repair them, it stretches how long until it gets bent again... 😛
    • Nah, not really responsible for that little fiasco, but I'm still pissed at myself for writing off my 86, or when I reversed my VX into a pole just before selling it, but, meh, 5hit happens to stuff, all it takes is a slight distraction, and life is full of distractions, and "dooh" moments   
×
×
  • Create New...