Jump to content
SAU Community

Recommended Posts

Beer Baron, I didnt think they would cost that much. My budget is around the $65k mark, although for something as clean as the first one I could maybe budge a little. Dont think I could justify spending that much on a GTR. Do you know any other sites to visit where I can find some nice cars for import?

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

Todd and Yumi (Edit* via Kristian) have a nice VS I (not VS II though, that you were asking about), coming in next month + warranty.

From Nara prefecture, no rust, no damage, modified 550ps, white, full service history.

With RAWS requiring virtually stock standard cars to be signed off, how does one get these more modified examples through without major time invested (assuming you can source stock parts).

Someone somewhere is fudging something!

IMO, a modded car ex Japland may appear value, but certainly not if you need to go to hell and back to have it complied correctly, as a friend who recently bought a 34R in and had to swap out (and find first!) a standard 34R dash because his had gauges inset into it. The cost of such works ads up quite quickly..... and you still haven't seen or driven it to actually know if its a good one!? lol

^^^^get a load of THIS guy!

haha nah just tricking...

it's a bit of a catch22 (i think that's the saying?)

cars have to be brought back to standard for compliance...

...yes and "no"

yes - it is a federal requirement to return the cars back to stock for compliance, however once the car "passes" compliance - it gets very hard to "chase it up" for the authorities...

so in a sense... the most viable time that authorities can "police" the RAWS (not revs - revs = pre 2005) the RAWS is BEFORE compliance is passed..

while it's in their shop...

crazy, right? any worker with half a brain would say so what, it's a work in progress.

i mean to say no modified cars can be imported.. is a load of pap.

im sure someone's going to get up me for saying this - but it's entirely up to the RAWS owner and how much money they want to make off their customer.

the RAWS owner is the one that "passes it"

there is no "government inspector" that comes down to the shop n check every car that goes through...

they are bestowed delegated authority to make the call themselves.

the onus is on them and them only to say "yeah okay" or "naaaaaah think i might need to take the bodykit off aye, yeeeeeaaaah gunna be 3 days labour for that aye"

they can "pass" it in whatever form they deem necessary. the only reason that they would make someone install a dash is because they RAWS owner feels like getting his wife a new flatscreen TV. and has to find a way to pay for it.

they can comply it "modified" and nobody would be any the wiser - if authorities come back to him for mods, he can simply push the blame onto the owner of the car n say "wasn't me"

the way they make the customer cough up the cash is...

usually they do the work before they ask.

and when you blast them for your 4 grand invoice - they often give you a ten minute rant about "litigation" and "sueing" and "malpractice" and try to pretend like they know what they're talking about. this intimidates the customer. and they pay it.

forgive the rant. i know it has nothing to do with GTR's... but to say that only "non modded" cars can come in is a load of scat. it is a rule that can't REALLY be policed and is perpetuated by whoever wants to perpetuate it... which is usually those who have something to gain from "returning a car to stock"

on topic - importing a GTR won't necessarilly save you money... but it MAY mean you'll get a nicer car... you never know - there are enthusiasts who DONT thrash their car in every walk of life.

take my soarer for instance, cost me a lot more to import. but the money isn't an issue when you get a mint car with service history and millions of yen worth of name brand mods :)

Edited by Mr Eps

it actually can be policed very easily. say a compliance shop gets a modified car and the customer begs them not to return it to standard as they can't afford it. workshop says ok, they then submit the car to DOTARS online as complied, at this point the car is supposed to be completed and awaiting it's compliance plate to arrive at the workshop. this is the point at which DOTARS will initiate a spot check and they give only 24hrs notice. so no a workshop cannot say 'it's a work in progress' as they have already submitted the car as completed. so if DOTARS arrive to find it not as it's supposed to be it's a big problem for any workshop that would do that. this is why most (should be all) workshops will insist on returning vehicles to standard as it's their business at risk. I would strongly suggest anyone wanting to import a modified car talk to you compliance workshop BEFORE you buy it and ask them what exactly will be involved and what kind of costs you are looking at. that way you can decide up front if it's viable or not. :)

^^^ it seems i was misfed information in the rant i got given!

that makes a lot more sense what you said... when i was being told it i was like "that makes no sense"

but yes - that's sterling advice :)

it actually can be policed very easily. say a compliance shop gets a modified car and the customer begs them not to return it to standard as they can't afford it. workshop says ok, they then submit the car to DOTARS online as complied, at this point the car is supposed to be completed and awaiting it's compliance plate to arrive at the workshop. this is the point at which DOTARS will initiate a spot check and they give only 24hrs notice. so no a workshop cannot say 'it's a work in progress' as they have already submitted the car as completed. so if DOTARS arrive to find it not as it's supposed to be it's a big problem for any workshop that would do that. this is why most (should be all) workshops will insist on returning vehicles to standard as it's their business at risk. I would strongly suggest anyone wanting to import a modified car talk to you compliance workshop BEFORE you buy it and ask them what exactly will be involved and what kind of costs you are looking at. that way you can decide up front if it's viable or not. :)

^^^ this man..

speaketh the trooth... :P

marlin,

I know the car you are talking about as well. it was me that pulled the dash on it well after the RAW did it.

i'm pretty sure they /have/ to give you SOME form of notice...

..not trying to sound cocky when i speak like that but im just saying i highly doubt they're allowed to "rock up" like that...?

on every random inspection I have ever had they just rock up with no notice .

on my last sample car the inspector told me an amusing story where they did another sample car inspection , finished a little early , had some time to kill so wen't back to the same workshop to do a random inspection on a different car

surprise!

they do the same here as well. I know of a few shops that before all this came to a head would let me grab a car - do what I needed to (usually an alarm or similar.) and return it to them., now its a entirely differnt matter. they will rock up and inspect at will.

If inspectors are turning up without notice, then I suggest workshops join the RAWS association and kick up a stink about it - inspectors are meant to give 2 days notice if workshops have not had any prior infringements. Even when workshops have been put through the ringer, they should get 2 hours' notice.

cuts both ways I guess, as long as the inspection itself does not impede on the company's ability to continue working then as the autoworx guy says random 'no notice' inspections won't hurt (although it's probably annoying).

If you're being targeted and it interrupts your ability to do your job then that's when a workshop should complain.

we have no problem with them turning up whenever they want as we have nothing to hide .

as a long term member of the raws association I would encourage MORE random inspections with no notice.

Yeah agree with that to a point. Like you say if you're doing the right thing inspections are not a problem. Once a cars submitted it should be all fine so there is no excuse for failing. but some workshops who are space limited will have cars stored at another site etc so it makes sense to give some notice to save wasting dotars time and taxpayers money.

Anyway at least you've proven what I was saying. People think it's a free for all but anyone thinking they can get away with sub par compliance is living on borrowed time.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Add to this... What blew the fuse too? If a circuit feeding power to the coils was blown, how were the coils even functioning to let the car start?   There is some seriously wrong wiring in that car for certain, and I'm betting there is some melted cables somewhere, but I can't explain the 30v either, unless there is something back feeding on that power line that has a dodgy power system and the electronics are giving it hell.
    • This is typically the case with such threads. What I cannot quite get my head around is where a reading above 12V (or 13.8 or 14.x or whatever the maximum achievable voltage might actually be in that specific car) comes from. 25V or 30V should be completely impossible. There's no way to create it. Hard to answer that question. It will literally depend on whether the current tune relies on the values as set. I'd guess it probably does. ie, the real base pressure being 49 means that the flowrate through the injectors will be higher than if it was 43.5. The Haltech's modelling should be handling that, but because it thinks the pressure is only 43.5, then..... I dunno. It should be thinking that it will be injecting less fuel with each pulse duration than is actually happening. So, something is definitely not-as-it-should-be, but specifically what that is is beyond my abilities to imagine. Someone like Dose who spends more time with Haltechs might have a better thought.
    • Bit of a late reply here as me and my wife have been really busy with new born twins. I finally got these issues fixed and it was something really stupid that caused all of this 🤦‍♂️... After alot of mucking around with trying to figure out what is causing these issues, I back probed one of the R35 coils on the power 12v supply, with the engine running it got 25v! And I thought, hang on..., this isn't normal. Measured my battery with the engine running to check for over charge from the alternator and it wasn't that. So then I dissconnected the R35 PRP coil harness and backprobed the power supply on the engine loom where the ignition coil harness connects, with the key on ignition (engine off) it measured 30v! So then I had to trace where that high voltage was coming from and it lead me to the brown relay "ECM & IGN coil relay" inside the cabin next to the ECU on the passanger wall. This relay feeds power to the ECM and ignition coils. Tried swapping it with another same relay. nah still 30v.. coming from the 2 green/white wires in the brown relay. So then I set my multi meter to the beep continuity mode and probed every fuse on the fuse box inside the cabin to try and find this high voltage power source. Wasn't any of the fuses inside the cabin. Then probed all the fuses in the engine bay and BAM, got my power source that was a 10AMP fuse called "ENG CONT". Pulled the fuse out, and what do you know... it was blown. 🤦‍♂️  So then I quickly replaced it with a new 10AMP fuse, started the car and yeah haha [insert extreme face palm]... The RPM blimping thing went away, car idles smoothly now like what it was before. I swear! I checked all my fuses with my test light twice before I created this forum thread. I think, maybe because one side of that faulty 10A fuse lit up on my test light, I must have thought it was still ok and not blown. But now I know to have both sides light up on the test light when checking fuses... I hate diagnosing electricals.... I'd take mechanical problems over electrical problems any day🤣. Drove the car around my suburb with the engine up to operating temp and it runs fine like before. However, I notice that my fuel pressure is still at 49psi. So I'm thinking this must be normal for my system as I've upgraded the stock fuel pump to a Walbro 255L/h with a constant 12v mod.  But anyway, I'm just glad to have my daily back on the road! Thanks everyone for the replies on this thread, all sorted now! One thing I want to ask you tuner guys, my base fuel pressure on the haltech main settings are set to 43.5psi from default (my tuner must have not checked the fuel pressure maybe when tuning my car?). Do I set it to what it actually is idling on at 49psi? Or just leave it ("if it aint broke, don't fix it/leave it")?  
    • The max they would go for me is 50.
    • That cannot have been a fun set of drilling. The stock "baffle" looks identical to rb26, I just cut fuel cell foam to fit the full length under the baffle.
×
×
  • Create New...