Jump to content
SAU Community

Recommended Posts

Looking at planning another Queensland meet and cruise before xmas. People are noramally too busy in December so this time it will be in November and probably on a Sunday.

About time we went north again, so venue and route yet to be determined

Expression of interest. Throw some suggestions for route and final venue

I am thinking maybe finish at either Bribie Island or Mooloolaba beach/park somewhere.

Maybe a route west of highway to find some hills :)

Once we have final date and venue, I will get this first post edited with details

Link to comment
https://www.sau.com.au/forums/topic/337143-queensland-meet-and-cruise/
Share on other sites

  • Replies 121
  • Created
  • Last Reply

Top Posters In This Topic

Sounds good, wonder if ill be the only M35 again? :(

Where you on the last one?

I was the only one.Hopefully you can make the next one, and i don't get left behind and lost.lol.

Will be ok if its up north,i should be ok. :)

Where you on the last one?

I was the only one.Hopefully you can make the next one, and i don't get left behind and lost.lol.

Will be ok if its up north,i should be ok. :(

I must have been to the previous one (was on the gold coast > spit)

Will be great this time :)

hopefully its on a weekend i have off, my november is looking a little busy. it would be good to get out on some less used roads, last time that haul up mt tamborine was a pain being stuck behind all the turtle slow traffic.

hopefully its on a weekend i have off, my november is looking a little busy. it would be good to get out on some less used roads, last time that haul up mt tamborine was a pain being stuck behind all the turtle slow traffic.

How dare you offend turtles to that extent! :)

Any ideas on where we are headed yet?

Not yet. I am off to laze around on a boat in the Whitsundays tomorrow for 1 1/2 weeks.

Will sort it out when I get back and hopefully the QLD club will know by then when their yearly charity cruise is on.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I replaced the whole clutch line with the chase bays braided hose, I think it removes that loop, is it the short hose that comes immediately off the slave or is there a drawing in the manual to find what you’re referring to? It was just re-bled when I upgraded to the nismo slave, old slave worked fine but I thought that might help, didn’t change a thing. It’s like the first half of the pedal is pushing air and then when it finally actuates the master the friction zone is tiny. Makes it practically impossible to launch the car
    • Yep, that was one of the things we learned fast in the past with our MX5. When you drive with the top down, you are effectively standing out in the sun, 100% of the time, and not getting in any shade (because roads aren't shaded generally!). Just like standing out in the middle of a field on a sunny 27C day is a bit of a bad plan, so is sitting in a MX5 without sun protection.
    • I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
    • I would agree, unless you need something specific to the HV motor/battery side repaired or investigated, any mechanic will be able to perform normal services, but if you prefer, maybe look for a mechanic who regularly services/repairs Nissans, the VQ engines are pretty common in the Nissan lineup.  Sorry, I can't make any suggestions, I don't live in Vic.
×
×
  • Create New...