Jump to content
SAU Community

Recommended Posts

Has anyone thought it maybe has popped a hose off?

yeah thats wat i was thinking.

i read on here that if it pops a hose off u can unplug the afm so it goes into limp mode and the car will actually idle. any1 else heard of that or is it bs?

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

ok guys, Had another play with it just then..

I put the stock BOV back on and check everywhere I could for any air/vacuum leaks but couldn't find anywhere I could possibly imagine one occurring..

After I reset the ECU by disconnecting the battery again (still not sure how I can tell if this works?) and started the car it did the same thing.

Originally it appears to idle fine until a few small pumps on the accelerator (of which it struggles to spool and revs very roughly) then it has trouble idling again??? after reving it a bit it then also starts to pump out black smoke again and shutters. I had a look in the bay while it was idling also and you can notice how much it shutters by looking at it (for some reason it appeared to me to be the turbo that was causing it). So I still think its the turbo that has shat itself but still hope ive missed something????

Does anyone know any good mechanics in the Geelong/Warrnambool area that actually knows what they are looking/talking at/about that may be able to solve my problem???

Cheers,

Dallas

black smoke is generally way too much fuel not dead turbo, another vote here for a popped hose or vaccuum leak. get someone who knows what they're looking at to check your hoses and pipes.

if you're around geelong, a workshop i've had good experience with for basic mech stuff is Dalton Auto-

http://www.daltonautomotive.com/

good luck

  • 3 weeks later...

Hey guys,

Just an update. I've booked my car into a decent mechanic finally to fix whatever problem I have (suspected vacuum leak I can not find). But just wondering what does it mean when I disconnect the AFM? I disconnected it and the idle started to change then stalled seconds later?

Cheer. Hopefully she'll be up and going soon :D

  • 1 month later...

In the shop as we speak... Been told it was just a bad exhaust leak and all my gaskets had been burnt out and it was getting confused or something.. getting the new tune and all fixed up by start of next week, will let u all know what the solution was ;)

I'm having a slightly similar problem except my car is pretty much stock, apart from cat-back. My revs start to fluctuate between 100 - 1500 rpm in idle, but only after a bit of driving (when car is warm). If I try to drive when this problem kicks in, I can feel the car pull back timing hard which means no power from the engine.

I've tested for vacuum leaks and cleaned AFM but still problem exists. Going to clean AAC valve this wkend but i'll be waiting to hear what was wrong with your line once it gets out of the shop.

In the shop as we speak... Been told it was just a bad exhaust leak and all my gaskets had been burnt out and it was getting confused or something.. getting the new tune and all fixed up by start of next week, will let u all know what the solution was :(

be aware there is nothing to tune on the std ecu... so dont pay for one. A tune on a std ecu is a reset... ie removed battery terminals for more than 30 secs... then doing the timing.

Changed plans.. picking up on wednesday.. will let all know what the result is then..

As for the tune I actually purchased a PFC (as well as other bolt on parts) so it can all be done properly and actually worth while..

I also thought that an exhaust leak wouldnt cause this but thats what im currently being told. I believe the leak was from the manifold gasket but all the bolts on the exhaust had come loose apparently??

Will know alot more when I actually go to pick her up so will update then..

Cheers

i doubt all these problems would be caused because of an exhaust leak...

yeah you could pull the whole exhaust off and all that would happen is it would run a bit more boost and run a bit richer and more retarded timing.

Got her back wednesday

Final verdict that it was the terrible exhaust leak from the manifold gasket that was the major cause. Had this all fixed up with a new dump and front pipe inserted aswell.

Also had, full tune, FMIC, BOV, manual boost controller, repaired turbo water hose, heat wrapped, flush n bleed of coolant system also done..

After the tune she puts out 222.6rwkw (on 14psi) which I very happy with as I was only hoping to break 200.. runs very smooth now and has a lot more aggression ;)

post-68489-1290759368_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • As I said, there's trade offs to jamming EVERYTHING in. Timing, resources etc, being the huge ones. Calling out the factory ECU has nothing to do with it, as it doesn't do any form of fancy boost control. It's all open loop boost control. You mention the Haltech Nexus, that's effectively two separate devices jammed into one box. What you quote about it, is proof for that. So now you've lost flexibility as a product too...   A product designed to do one thing really well, will always beat other products doing multiple things. Also, I wouldn't knock COTS stuff, you'd be surprised how many things are using it, that you're probably totally in love with As for the SpaceX comment that we're working directly with them, it's about the type of stuff we're doing. We're doing design work, and breaking world firsts. If you can't understand that I have real world hands on experience, including in very modern tech, and actually understand this stuff, then to avoid useless debates where you just won't accept fact and experience, from here on, it seems you'd be be happy I (and possibly anyone with knowledge really) not reply to your questions, or input, no matter how much help you could be given to help you, or let you learn. It seems you're happy reading your data sheets, factory service manuals, and only want people to reinforce your thoughts and points of view. 
    • I don't really understand because clearly it's possible. The factory ECU is running on like a 4 MHz 16-bit processor. Modern GDI ECUs have like 200 MHz superscalar cores with floating point units too. The Haltech Nexus has two 240 MHz CPU cores. The Elite 2500 is a single 80 MHz core. Surely 20x the compute means adding some PID boost control logic isn't that complicated. I'm not saying clock speed is everything, but the requirements to add boost control to a port injection 6 cylinder ECU are really not that difficult. More I/O, more interrupt handlers, more working memory, etc isn't that crazy to figure out. SpaceX if anything shows just how far you can get arguably doing things the "wrong" way, ie x86 COTS running C++ on Linux. That is about as far away from the "correct" architecture as it gets for a real time system, but it works anyways. 
    • Holy hell! That is absolutely stunning! Great work!!!
    • It does when you start adding everything else in. But it's not just compute. It's the logic. Getting your timing right (I'm not meaning ignition timing for the engine). Making sure of your memory mappings, seeing your interrupts. Microcontroller devices only have so much capacity. For the most part, you want all those timers and interrupts in use on your engine control, which means you're left with less than ideal methods for timing and management of other control functions.   Let's put it this way, my job is all about building custom hardware, that goes into cars, and integrates with them. We're also waiting on a media confirmation from SpaceX too fora world first we've just completed with them in NZ too. It's not just the little toys I play with. But you know, you can think and believe what you want.
    • I don't think it's a good buy, the trend looks bad     lol.
×
×
  • Create New...