Jump to content
SAU Community

Recommended Posts

ABES has built and is currently maintaining alot motors for the improved production race series.

Examples of his work include pro car entrants in this years superlap. BSM GTR , TILTON EVO,

Arguably the best in the game and does not build for any mofo off the street.

Specs

Head fully recon'd

HKS 264deg Step 1 cams (5000kms)

Tomei Type B Springs and retainers (NEW)

Os Giken Cam gears (5000kms)

Extensive Port and Polishing for response

Metal Head Gasket (NEW)

Trust 87mm Pistons (5000kms)

New Piston rings and All Bearings

N1 Rods shot peened with rod bolts (NEW)

N1 Oil Pump and Water Pump (5000kms old)

All ARP bolts (NEW)

Fully balanced

Block crack tested

acid dipped, decked etc

Crank linished (5000kms)

Motor is currently at engine builder after a strip down

and rebuild (freshen up to last another season of racing)

Reason for parting is im Looking at building a stroker motor for a larger

single turbo.

The above is a excellent bullet proof combination for 500awhp and is the

ultimate for a street or weekend track setup

My mechanic is willing to gaurantee this if installed, tuned and maintained

with him in sydney

Looking at $11,800 - current bill to pick up motor is $3800 (labour only)

PM if serious do discuss finer details and stay out of thread if old mate down the road can build this

cheaper

:D

Steve

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I have always resisted the urge to go silly. 8" wide wheels and street friendly spring rates? Check. (Let's not talk about the steadily increasing spread of spherical joints across my suspension!!) Stock turbo, run at 12 psi? Check. Lasted for ?10 years before it died. Highflow put on rather than seizing the opportunity to go G45. You don't need 300 rwkW, let alone the more massive numbers that seem to be essential these days, to have a car that is already way too powerful and fast for a streeter. ~250rwkW is fine. I've never exceeded 200, although I will sneak up above it if and when I manage to get my finger out and do what needs to be done to use the highflow's capacity. You don't need $10k worth of CF bits glued onto the outside. You don't need razor sharp ankle cutting front splitters. You don't need the car to be 2" off the ground. You don't need flawless paint, mirror finished wheels, brand new indicator lenses, etc etc. All these things just make the car impractical and will cause you pain when they get damaged, which is inevitable for a street car. A few nice additions are good. Good seats are good. A nice stereo is good. A/C is good! (46° on the road yesterday and my A/C is degassed again. Was moderately traumatic driving home!) The main reason I stick with a mildly modified old Skyline is that I have had it for  >25 years, the mods are the rolling result of 25 years of things dying and being upgraded opportunistically, coupled with a few "just 'coz" ones. And I hate modern almost all cars. If I was a young buck starting out now.... I wouldn't bother. Cars have a few years left where there is any possibility of interest or fun. Thereafter there will be no such thing allowed or possible. Any time, money and effort spent now on a project would just be a waste.
    • Let's be wary though, if cranking is so far off, what else isn't set right? Are the dead times set right, voltage compensation etc?   It definitely sounds like it's cranking fuel issues, and holding flat to the floor is shutting them down, but I'm with Duncan that if nothing was changed in the ECU at all, and then this started, I'd be more thinking a leaking injector.   Do as Duncan said, drop the oil and make sure it's not full of fuel.
    • It actually means give it less throttle.
    • Yeah if the goal is to drive something then modifying a car is a bad idea.
    • Wowee! She looks like a major handful out there Pete!
×
×
  • Create New...