R32 Gtr Rb26 Bellhousing Bolt Pattern

[ant0ny]

Hi, Does anyone have a drawing or even better a CAD file for the R32 GTR RB26 bell housing bolt pattern. I need to make an adapter plate from the R32 GTR 4wd box to a different engine.

[GTRNUR]

Your best bet is to see if you can borrow a VL turbo auto bell housing from a tranny shop somewhere as they are the same pattern.

Trace it, and measure up the hole centers on diagonals... then draw one up yourself... thats unless someone else is going to be fourthcoming with an autocad drawing. From my experiences though most of the guys with this stuff on file don't share it.

[ant0ny]

Your best bet is to see if you can borrow a VL turbo auto bell housing from a tranny shop somewhere as they are the same pattern.

Trace it, and measure up the hole centers on diagonals... then draw one up yourself... thats unless someone else is going to be fourthcoming with an autocad drawing. From my experiences though most of the guys with this stuff on file don't share it.

Thanks for the info it's looking that way... I have a spare gtr box sitting in the shed so yeah I was just saving myself a bit of time measuring it up and dropping into AutoCAD. I'll post up my CAD file when I do it in the next few weeks... for those who might like it.

[John Murray]

Hi Antony

Did you ever get the drawing of the bolt pattern? I'm trying to put a 6L80e GM gearbox onto an R30 engine. Autocad file would be fine.

John