Jump to content
SAU Community

Recommended Posts

I am preping the car to do a little track work (propably 4-5 times a year), nothing serious, just wanting to have a little fun in a controlled environment.

I am considering removing the Hicas as many people have recommended doing, but b4 doing so i would like to get a couple of issues cleared up.

1/ If the car handles better without the HICAS why was it installed throughout the 32, 33 and 34 models?

2/ If the fuse is taken out for track days, is the HICAS firmly locked in the neutral positon?

3/ On a R33 what methods can be used in disabling/removing the HICAS?

4/ Can anyone please supply links to suppliers that have kits for R33's?

Thanks

Alan

Link to comment
https://www.sau.com.au/forums/topic/33786-r33-hicas-removal/
Share on other sites

Hi Alan, this has been discussed a great number of times I suggest you do a search. In the interim brief suggestion follow your questions......

1/ If the car handles better without the HICAS why was it installed throughout the 32, 33 and 34 models?

Wally factor. It makes the car safer for the wallys, it doesn't make the car handle better. I have a question for you, if HICAS makes the car handle better then why is there none, zero, zilch, SFA, race cars with HICAS?

2/ If the fuse is taken out for track days, is the HICAS firmly locked in the neutral position?

No

3/ On a R33 what methods can be used in disabling/removing the HICAS?

Replace the rack with a tube and screw the std steering links into the tube. Or buy a kit from Tomei which has washers that you stick in the ends of the rack to stop it moving. We replace the rack as it is lighter.

If you have replaced the rack then remove the hydraulics, it also saves a lot of weight. If you used a Tome kit then you do nothing else but plug in the electronics box that tricks the dash warning light.

If you have replaced the rack and removed all the other useless parts then remove the HCAS warning bulb from the dash as it will stay on.

4/ Can anyone please supply links to suppliers that have kits for R33's?

Try the Tomei outlets, I use these guys.....

www.hioctaneracing.com.au

Hope that helps

Link to comment
https://www.sau.com.au/forums/topic/33786-r33-hicas-removal/#findComment-677813
Share on other sites

Thanks :D

Have recently read a thread relating to the R32 hicas system and it's removal. You also stated the removal of the hydrolics in that thread.

Does the R33 HICAS work hydrolicly? I thought that only the 32's had a hydrolic system, as the 33's and 34's were upgraded to a fully electronic system.

I am cosidering using the TOMIE system as it can be easily reverted back to normal if need be. Also wouldn't the removal of about 30kg of parts effect the "balance" and front to rear weight distribution of the car, thus effecting it's handling.

I am just trying to get educated on such matters :(, i am in no way trying to 2nd guess your tactics, as your knowledge and experience is FAR greater than mine.

Thanks

Alan

Link to comment
https://www.sau.com.au/forums/topic/33786-r33-hicas-removal/#findComment-677824
Share on other sites

Would installing the TOMIE HICAS lock kit damage the system? Just thinking, if the shims prevent the HICAS from moving, would it cause great strain on the mechanics or does the electronic box disable the system completely (kills power to the HICAS)?

Link to comment
https://www.sau.com.au/forums/topic/33786-r33-hicas-removal/#findComment-677839
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Damn it, I was at work last night, and stayed in a room there during the storm with the car outside, but undercover, I just went downstairs and well....there was a large steel locker that has come from some place last night, it wasn't anywhere I could see yesterday, and yeap, it landed on the fraking car....of course it did..... LOL So, I'll need to take it back for paint and panel, luckily it was only the boot that took the hit, so it could have been worse Serves me right for staying at work and getting on the cans with some of the boys
    • Yeah, really happy with how it all turned out As for aftermarket lip, nah, I'm not really a fan for practically reasons on a street car that gets driven everywhere  I did have the full lower kit on my 2015 STI, but found the front lip scrapped alot, even at stock 4x4ish ride height As the NC sits now, with the lowest point of the car at 110mm, so just legal, some steep driveways and steep speed humps will still "just" scrap those little plastic OEM air dam thingies on the undertray just before the front wheels
    • Here's one I help build and tuned a decade ago, Garrett  GTX3071R Gen 1, T3 twin scroll 0.83 rear housing. Went from larger 272 cams down to smaller Tomei Poncams to help with the low end. S13 non VCT motor. Car was purpose built for the track, hence low down was the focus. Note the actual dyno chart shows lower boost, however the EBC and boost gauge showed 1.9Bar (Ignore the torque, I was young and didn't know how to set derived torque)  
    • I’m doing some side developments on SR20det S13 engines, its one my hobby cars used it to compare flow capacity of some smaller size wheels. SR20det is one of another JDM legendary engines I'm sure there are plenty of SR enthusiasts on this forum, I will share results some common turbo configurations here. a quick run down of what the car is: Wide body 180sx Type X with black top engine (blue). It has: Stock bottom end Haltech 1500 ECU 5-0 motorsports trigger kit Kelford SR20DET Beehive Spring with Titanium Retainers Kelford Cams SR20DET S13 188-B 268/272 Cams G25-660 Turbocharger in T2 .64 rear housing internally gated ARP Head studs MLS head gasket 1000CC ID injectors Walbro 450L Fuel pump Front mount cooler kit JJR’s 3 inches turbo back exhaust (its too short for the 180sx it had to be extended) Pump 98 fuel Hub Dyno tune So far made 270rwkws at 22psi full boost by 4500RPM. Engine is very knock limited hence a pretty bad looking top end. From previous experiences it seems like SR20dets are happier with bigger size turbine, some thing like a GT30 would make way better top end, but on same time response is lost. It won't be a problem with S15 VCT engines. I'll be testing alternative turbine housing, turbine wheel and possibly dump pipe options for extra flow to resolve the problem and of course E85 would resolve all the issues.            
    • Awesome writeup and details. Thanks for sharing the story so far. I can relate to parts of it with my previous car and some of the issues I had to deal with.
×
×
  • Create New...