Jump to content
SAU Community

Can Your Read This Plug For Me? ....please...

GD51LA

By GD51LA,
in Engines & Forced Induction

 Share

Recommended Posts

The Dan Grand Master

The Dan

Posted
Posted
Looks quite rich fouled. Also is the crush washer crushed? What heat range.

How is that rich fouled?

The black around the ring is normal for any turboed engine. The center is where you should be looking

:/ Damn, I thought he did a pretty good job as it is! lol

Yeah I was joking lmao

rob82 Mentor

rob82

Posted
Posted
How is that rich fouled?

The black around the ring is normal for any turboed engine. The center is where you should be looking

Yeah I was joking lmao

It looks as tho its been rich fouled and then it has partially cleaned up. Hence the heavy carbon layer around the plug end.

Supa Steve Enthusiast

Supa Steve

Posted
Posted (edited)
It looks as tho its been rich fouled and then it has partially cleaned up. Hence the heavy carbon layer around the plug end.

This post is pretty close to the mark but without running the engine right to get a proper plug read the results can be decieving. Need to see the ground strap to get an idea of heat range/timing and also cut the thread off it to get a look at the fuel line. This looks fairly rich that has been cleaned up by the car idleing hence the clean porcelain near the electrode but again the plug has been in the engine too long to correctly read as there is quite a thick carbon build up. I hope thats not aluminium deposits i can see (silver spots) and if so there has been some detanation causing the edge of the quench pad to be deposited on the base ring . Throw a fresh set of plugs in and do a full noise run then shut it down before it returns to idle as this will allow the plug to be read accurately.

Edited by Supa Steve
The Dan Grand Master

The Dan

Posted
Posted
It looks as tho its been rich fouled and then it has partially cleaned up. Hence the heavy carbon layer around the plug end.

rich - yes.....fouled - no

Pull out any turbo spark plug and it will look like that. The black is normal. The centre of the plug tells you what condition the cylinder is running in. White is lean and black is rich, light brown is perfect. If it has deposits on the outer and/or centre electrode (which it does have tiny amounts) it would usually indicate poor fuel quality/additives or slight burning of oil but I think it would be fuel moreso in this case

The Dan Grand Master

The Dan

Posted
Posted
This post is pretty close to the mark but without running the engine right to get a proper plug read the results can be decieving. Need to see the ground strap to get an idea of heat range/timing and also cut the thread off it to get a look at the fuel line. This looks like its a rich tune that has been cleaned up at idle hence the clean porcelain near the electrode. A proper run then shutdown will allow the plug to be read accurately.

This is also true but still normal for these engines to run rich at peak torque or midrange. Anything less will usually kill them

rob82 Mentor

rob82

Posted
Posted (edited)
rich - yes.....fouled - no

Pull out any turbo spark plug and it will look like that. The black is normal. The centre of the plug tells you what condition the cylinder is running in. White is lean and black is rich, light brown is perfect. If it has deposits on the outer and/or centre electrode (which it does have tiny amounts) it would usually indicate poor fuel quality/additives or slight burning of oil but I think it would be fuel moreso in this case

That amount of carbon build up around the thread end is not normal - I would be very dubious of the tune and or too colder plug.

If my tune resulted in a plug that read like that I would concerned.

Edited by rob82
GD51LA Mentor

GD51LA

Posted
  • Author
Posted

some fat feedback boys. as usual :P

those shots were taken from my new canon camera :happy: i thought it would need a great picture for us to read it properly

ok so i put in a new plug, drive it to 8k then turn it off, right?

no tune, its completely standard just exhaust/front pipes/5cat..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      Rusty roof repair

      By Duncan · Posted

      Shit thing to find eh? I guess the big issue is that whatever "fix" you do now, it might slow the rust down but won't fix it. I just wanted to add that in no way is fixing sheet metal in 3 dimensions the place to start with welding....that is a pro only job because its too hard to work out where things should be, let alone doing a clean enough job that it can look OK and still be strong too.  I needed to get a new rear quarter panel on the GTR and it took a pro weeks to get the old one off cleanly, new one on in the right place and looking somewhat like it should have with most of the previous connecting panels in place. Gluing a couple of bits of metal together with a welder in the garage is doable, but that is totally different to doing panel  replacement
    • Duncan
      first time swapping rb25det into r34

      By Duncan · Posted

      This seems to be a very popular swap since all the turbo skyline prices went through the roof! I'll let someone more familiar chime in, but I understand that yes you probably want to swap the loom in to swap out the auto TCM stuff. You should not assume everything just plugs in either, you need to check at least the ECU wiring diagram for any differences at the plug at the left headlight and probably the ones near the ECU that join the dash loom too  
    • dingleberry
      first time swapping rb25det into r34

      By dingleberry · Posted

      hows it fellas, my first post here which seems crazy cos half the forums i read are like the same age as me haha. to make a long story short ive got an r34 sedan (rb25de neo auto) which im swapping to a s0/s1? rb25det, r33 big box and nismo gt pro lsd. i have the motor and gearbox all bolted up outside the car, old motor and trans out. i bought the motor with stock ecu and loom, do i switch over to that? or will it be easier to get a r34 manual ecu and keep the loom if thats even possible.  also engine mounts look different, anything else thats different or incompatible? cheers, hope this all makes sense Paddy
    • jez NF
      The Evolution Of "night Fury"

      By jez NF · Posted

      att.4QNbuJlz_gNZPFBGFqeEvxSUHXkGt7z40V59MrtXTPg.mp4    
    • Keeper
      SAUNSW - World Time Attack Challenge - 5 & 6 September

      By Keeper · Posted

      Plan on the day will be to park trackside. Depending on space availability we will try put a small shade tent and a few of the cars on top of the hill inside turn 3, this is an easy to get to parking area with views of Turn 2, Turn 3, Turn 4 and Turn 5 and limited other pieces of the view around the track. IMPORTANT NOTE! One consideration from previous years is from memory the trackside parking sells out before the admission tickets, for that reason I encourage anyone planning on coming to buy tickets for parking now via the official website; https://www.worldtimeattack.com/ The type of parking you are looking for is 2 Day Park & View (Access Around Venue) Vehicle Pass Only Please note this does not include admission to the event itself, remember to grab that also, and kids under 12 get in for free!
×
×
  • Create New...