Jump to content
SAU Community

++ 1.5way Kaaz Diff ++

nisskid
 Share

Recommended Posts

nisskid Grand Master

nisskid

Posted
Posted

Alright, i have a KAAZ 1.5way mechanical diff out of my car. it's a great diff, i wouldnt be selling it if i didnt need the $$. i drove around with it as a daily up at a ski resort where there was ice, snow and wet everywhere and didnt have any issues with it slipping or skipping around tight corners or anything, barely anything with 3 point turns either. but on the track it was beautiful, no signs of any open wheeling, extremely predictable, with great turn in.

this comes with an R32 housing, and half shafts, so ready to bolt straight in, dont have to take the centres out.

$880

Located near Mitcham in SA, can send anywhere in Aus at buyers expense.

here's some pics of the actual diff:

IMG_0848.jpg

IMG_0849.jpg

Link to comment
https://www.sau.com.au/forums/topic/338618-15way-kaaz-diff/
Share on other sites
fly355 Enthusiast

fly355

Posted
Posted
Alright, i have a KAAZ 1.5way mechanical diff out of my car. it's a great diff, i wouldnt be selling it if i didnt need the $$. i drove around with it as a daily up at a ski resort where there was ice, snow and wet everywhere and didnt have any issues with it slipping or skipping around tight corners or anything, barely anything with 3 point turns either. but on the track it was beautiful, no signs of any open wheeling, extremely predictable, with great turn in.

this comes with an R32 housing, and half shafts, so ready to bolt straight in, dont have to take the centres out.

$880

Located near Mitcham in SA, can send anywhere in Aus at buyers expense.

here's some pics of the actual diff:

IMG_0848.jpg

IMG_0849.jpg

how much would it cost topost to 2130 for diff, cheers

Link to comment
https://www.sau.com.au/forums/topic/338618-15way-kaaz-diff/#findComment-5476314
Share on other sites
Snipa Apprentice

Snipa

Posted
Posted

Hey there

is this the same diff ratio as the r33 gtst? im putting a r33 auto into my gtst but obviously the speedo will be out heaps. was thinking with this diff i might be able to kill 2 birds with one stone?

thanks

Link to comment
https://www.sau.com.au/forums/topic/338618-15way-kaaz-diff/#findComment-5476948
Share on other sites
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • TurboTapin
      New fix for low tyre pressure from bmw

      By TurboTapin · Posted

      CTIS (Central Tire Inflation System) has existed since the 80's. I'm looking into buying a Hummer H1 and they generally included it. 
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      My idle is set at 950rpm though - Moving the timing around 20 degrees is not really what I'd call a calm idle. That said... neither is chop, by definition. The LS ECU likes to adjust timing to hold idle as opposed to air. It'd work, but generally speaking there'd be a discrepancy in the base idle and the IACV would want to move the timing around anyway to maintain said idle. I think I'm just going to keep the timing steady anyway. Preserve my engine mounts.  My aircon is now officially regassed. As the guy was reversing I noticed my reverse lights do not operate, along with my reverse cam. This is a bit distressing, because 100% of guides talk about which wire to connect to backup cams as "the goes with the [other color] wire". Often when doing conversions. Unfortunately the R34 colour wires aren't documented Unfortunately I had a T56 Magnum gearbox with it's reverse switch, which also isn't documented. Unfortunately there's definitely not documentation for people with both of these in the one car. Unfortunately I forgot. After many hours of this, I have a reverse cam and reverse lights again. The wire going through the trans tunnel to the reverse switch had broken. Upon inspection, it looks like this one wire had about 7 spade terminals and extensions in it.. for reasons I cannot possibly comprehend. I also spent the 750 hours required to clean up the wiring behind my head unit which now looks like this: This is a monumental improvement relative to what used to be there WRT triple gauges, head unit, traction control, wideband controller, and whatever the f**k OEM stuff still exists there in various states of connectivity/needed. Next step is to check in at the Exhaust shop to see/confirm how much clearance I have, to decide what mid mufflers or 'resonators' (which are just straight through, narrower mufflers) I can add and hopefully cut out a lot of exhaust leaks, pinhole, v-band or otherwise. But first step will be to 'take a look' before the next step.
    • Dose Pipe Sutututu
      Another little story of weird shit happening

      By Dose Pipe Sutututu · Posted

      Fark the AFM card and Nistune, Haltech Nexus S3, DBW, cruise control, flex fuel, dis dat.  
    • MBS206
      R34 gtt rb25det neo timing belt kit

      By MBS206 · Posted

      It's most likely the bolt/bush where the cover bolts back wore and allowed cover to move forward.
    • GTSBoy
      Another little story of weird shit happening

      By GTSBoy · Posted

      Still haven't put the injectors and R35 AFM in so we can tune the bloody thing for the HG highflow it got mid last year! I think I can forecast the upgrade path to a bigger twin scroll, external gate, Haltech, flex setup, Samsonas, dis dat, etc will be .... a while away!
×
×
  • Create New...