Jump to content
SAU Community

Recommended Posts

to OP. cefiro genuine piping fits best. anything else will need slight modification. if you're doing de plus T..

Trust me from experience. Get an r34 smic. Don't sleep eat or piss until you get one. Don't waste time with a31 smic not worth it.

De+t setups run best with r34. It's big but small enough to retain boost response. And to all naysayers. It's plug and play with a31 piping.

Richard, get a core. ive got lots of s13/r32 piping we can make it work dude? if not we can weld them up????

cheers for the replies guys, ive found a cooler but havent bought it yet, if you've got piping and connectors, oooh yea i want them

can we do deals on sunday?

R32 pipes need to be cut down a bit.

I've got a Cefiro SMIC, brackets and pipes which I don't need if I go ahead with buying a halfcut (either tomorrow or Monday).

We can make a deeeaaal yeah ?

Dammit why do you have to be in Perth right now,

from memory R32 SMIC piping dont fit, I was chasing up the piping at one stae and thought to go R32 but the holes through the chassis were in a

O not a O configuration, the piping was quite different.

O O

You'll have a better chance with R33 piping so long as you have the turbo to cooler pipe for the 20 as the 20 turbo has a smaller outlet.

cheers for the info, I got a R32 one and pipes and they seemed to fit up ok, I didn't want a FMIC I will if I upgrade the hairdryer

the reason it would be a good idea (or most people do) get a larger intercooler is because the factory intercooler is very small and suffers from heat soak really bad (it's more like a interwarmer , theres nothing cool going through there after a 20 min drive , especially through summer) which is why people were suggesting to buy a fmic , even a small one :( . try his: get some vacuum line and re route the back window squirter line to the intercooler with a garden spray squirter at the end of it (aim it to spray over the core as much as possible) , next hot day after driving it wherever and getting it up to temp for a good 20 min , hit the sqirter button and see/feel the difference it makes :)

I know it makes a huge difference, I had a doozy on my old RB25 VL commohore, the fmic will find its way onto mine soon, I just needed the car back on the road, its a wonder the humble RB20det, I remember when they used to be the fastest thing ever 10 years back, not so much now, but its better than the DE it had, god im glad thats gone

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What can't be done with a little bit of decking board or similar timber bolted to a hub flange via 2 wheel nuts is not worth talking about.
    • I noticed something. On the tps sensor and the sensor behind the adjustment screw is adjusted towards the far left. Are these screws supposed to be centered? (this sensor was in the same position before the tune as well)  Also attached a photo of where my car usually idles at when warm (sometimes a tiny bit above that). I think I might have screwed up the calculation and it might have better than I thought lol at 750rpm still not 650rpm though.      
    • So for both general interest of engine health, and to rule out any coolant/oil issues, I organised an oil analysis done on the 125,000klm oil Results below, all good, just a bit of fuel dilution which I'm not too worried about
    • This is actually a really good way of measuring what wheels fit. If only there was a similar measurement between hub face and suspension :p That said, it's probably pretty simple to actually measure it all with the wheel off the car for the rear. The front is a bit more complex but.. 
    • Being the top Google search result for R34 wheel-related inquiries, lemme throw down my experience. I calculated that 100mm from hub face to wheel face is about the perfect fitment for my ENR34 sedan.  I've been running 18x8.5s, ET35, with a 1" spacer. So, 8.5in to mm = 216mm. 216/2 = 108mm. 108-35 = 73mm. 73+ 25 (1" to mm) = 98mm.  If you wanna get close to this on dif widths, here are the offsets you'll want: 9" - ET around 15mm 9.5" - ET around 20mm 10" - you're crazy, but ET around 30mm All these should fit perfectly on a non-widebody, non-GTR Skyline. Note that it's probably the absolute max, and you're probably better off running a couple degrees of camber in this config, but it looks great, super flush.
×
×
  • Create New...