Jump to content
SAU Community

Recommended Posts

So I've got an R32 gts-t with 17x8 and 17x9 rims on it atm, currently running rubbish free tyres which with 240kw it just spins and understeers everywhere so time for some new ones.

Now I am currently looking at federal 595 RPM 215x45x17s for the front which are meant to grip better than KU36s, and on the rear I am either looking at 245x40x17 KU36s or Federal 595 EVO 235s.

The federal 235s are $159 and the 245 ku36s are $223, I would get 235 ku36s but they are sold out world wide.

Now currently the car is fairly understeer biased and it spins the rears even in a straight line in 2nd and 3rd so whilst I want to put really grippy tyres on the front to make it more oversteer biased, I also want to be able to put the power down.

What would you guys do, get the less grippy 235 federal evos, or get the more grippy 245 ku36s, only issue is the ku36s need more heat in them and will wear out faster so I am quite confused what is going to give me more value for money.

The car is daily driven to work and is also tracked so I need something that will give decent performance but I don't want to chew good tyres out in 5000kms just driving it to work either.

Thoughts people?

my thoughts:

1) don't make an assesment on how the car handles based on crap tyres that have no grip anywhere

2) don't try to balance a car with different types of tyres

Good points, the ultimate goal is maximum grip at both ends, question still is are the KU36s likely to provide me with better value for money.

Someone has offered me a set of 215x45x17 595 RSRs for $350 so I might grab them and KU36s for the back, both are semi-semi-slicks with similar tread ratings.

treadwear is not standardised... it's the manufacturer's own scale

having said that, my Nitto NT05's (fronts) have a 200 treadwear and have lasted 5000k daily driving, 3 DECA days and a few hill runs

and as for the KU36's being shit/deadly in the wet... i don't find that at all. from my experience they are just as shit as any other road tyre in the wet, but a lot better than most in the dry.

honsetly i think people think "woah, i'm running semi's brah.... i can drive @ 100% in the wet now" (also a KU36 isn't a semi as many people seem to think)

for optimum grip in a street car i would highly reccomend the mullet setup i run these days, which is the NT05's f and KU36 r however the smallest nitto make is a 235

nt05.jpg

NT05

modp_1006_35_o%20tire_buyers_guide%20kumho_ecsta.jpg

KU36

People have said that but they have a treadwear of 180 so I should still get at least 5000kms out of them surely?

5-7k km rear, 10k km front depending on alignment and right foot.

In the dry- cold they are useable, warm they are great(hills). Wet when they have tread they are good! no aquaplaning issues experienced, i drove through some f**ked storms. when they are on the markers, well, rears are shit in the wet haha

ku36's are also very shit when cold lol

Don't know about that. I've won motorkhana's with them and thats pretty much all cold driving. 50 sec stages, hardly getting hot. I think they're fine, especially when new.

And yeah they do wear pretty quick.

honsetly i think people think "woah, i'm running semi's brah.... i can drive @ 100% in the wet now" (also a KU36 isn't a semi as many people seem to think)

+1

I recently bought KU39 as I couldn't get a hold of any KU31's and KU36s have too much grip. I ruined a set of KU36's at my last DECA as I have yet to learn the basics of braking (well, I know the basics but in the heat of the moment you forget :( ) and fried the soft, warm tires on a rough piece of track. I want to learn my limits on street tyres before I push the car on anything better.

Having said that though the KU39's do feel pretty good, although I've only used them for daily driving so far.

if i remeber correctly, 235/40r17 were really expensive in any brand cos they are a weird size, 234/45r17 were really cheap cos they are used on a lot of cars with factory alloys

just food for thought

When I bought my new tyres about a 2 weeks ago the dealer said the KU36 was being discontinued, I don't know how accurate that is, jus what he told me.

I don't think you can ever trust what a tyre salesman says. KU36 being discontinued means "I can't get em so buy these bob jane all rounders instead".

"Top of the range" means they are so hard they will survive through nuclear holocaust.

I was told the other day Dunlop Direzza DZ03G's are discontinued and were beign replaced by Sport Maxx (i.e. I have these in stock)...... ok mate bye....

i run ku36's all around atm until my engine is done ang then ill be running the nto5's

ku's are ok tyres man, once they r warm they will give u really good grip. but they need to be the right profles (not too much stretch, just mild)

i dont like them at all in the wet lol. it gets a lil messy haha.

ive had them for about 2500kms and the rears are close to being finished, no more than 100kms left in i reckon

  • 2 weeks later...

Put the tyres on today (215 595 rs-r on front and 235 595evo on rear) has completely transformed the car, much much faster in the corners and it is far more neutral to drive, ever so slight understeer on turn in but it can be completely changed to neutral->oversteer with a bit of throttle, can't wait to take it to the track. Also people questioning the size there is zero stretch on 8" and 9" rims, it looks completely flush to me.

Thanks for the advice guys.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey y'all, Looking local to USA, for just side skirts and rear bumper or half bumper. Pics for reference below: Top is east bear style rear bumper, bottom is uras style rear half bumper. Side skirts are interchangeable.  Thanks y'all!
    • Damn, as someone who just glued the damn things in (very slightly askew but better) I wish I saw this, or someone made this. Would be worth linking this to Boosted International. They're always looking for product ideas and this is something they would likely make.
    • You know what, I'll double or nothing. Save your money, buy a V8 Manual Mustang in 2 years and have a more fun street car with better support and all that. I often tell people "if I could do it all again, I wouldn't". Sell your R34 GTT to someone, spend the 20k in difference between that and a 2018 Gen2 V8 Manual Mustang. I'll bet you will have the $ in your pocket by the time you spend the ~20K differential on mods and get them installed. Just planting this seed for future regrets. Blah blah, wisdom of people who would do it differently who are at the end of the road you are just starting on, etc. Car modding is often death by a thousand cuts as you wait to afford the next big mod. Imagine a 2 door Skyline with a 330KW N/A V8 Revving to 7500rpm like the RB25, with 315's all round.
    • Yes I'm going through a similar thing with my R33 with rust in seams due to dried out seam sealer cracking. After much research I settled on Penetrol. Read what it does and its done a bloody fantastic job for me. Pressure pack comes with a thin tube to get into hard to reach places.
×
×
  • Create New...