Jump to content
SAU Community

Recommended Posts

okay first of all hi :)

two weeks ago i purchased a skyline, was sweet. still sweet

its a r34 25gt

yesterday i put unleaded 95 in it. . and today when i drove it there was a lot missfires. . D:

i dont know if its the fuel or rather the car is being dodgy

Edited by mynameisalan
Link to comment
https://www.sau.com.au/forums/topic/338967-r34-running-unleaded-95-no-go/
Share on other sites

drive very conservatively until you can use 98. If you have E85 around, squeeze some of that into the tank and dilute the 95. Around 10-15 litres will help, octane booster will also work if you get one that actually works.

on a NA 95 octane should be fine. any misfires on 95 won't be from the octane rating. might be from the quality of fuel, but not the octane. you could also try backing the timing off a bit if you are worried.

japan's octane ratings are the same as ours, they just happen to have one that is even higher, but they still have 91 and 95 octane fuels over there from what i gather.

  • 7 months later...
  On 03/10/2010 at 5:02 PM, Don Dada said:

Geeze u guys do like if 95 is kerosene or some shit....

Where i'm from 95 premium is our best brew and we run all skylines on that with no probs...just keeping the boost down on hot days

i run e10 95 in the stagea and keep the boost to 5psi most the time and it runs fine

even on 7 psi its ok, down a bit of power compared to 98 but its fine

  • 2 weeks later...
  On 03/10/2010 at 11:11 PM, mad082 said:

japan's octane ratings are the same as ours, they just happen to have one that is even higher, but they still have 91 and 95 octane fuels over there from what i gather.

Yes, but the average altitude of Japan is about 1000m, whereas our average altitude is about 400m.

I believe the "knock" map on the standard ECU is designed for 95 octane.

  On 13/06/2011 at 11:20 AM, Hanaldo said:

Yes, but the average altitude of Japan is about 1000m, whereas our average altitude is about 400m.

What's the relevance of that on a MAFed engine?

  On 13/06/2011 at 10:08 AM, mynameisalan said:

i forgot to tell you guys that my spark plugs was the cause haha. running on 5 cylinders was fun.. NOT

95 is fine stuff but i still run 98 nowadays

Not trying to be rude, but a car down a cylinder sounds a lot worse than the odd backfire... How did you not notice?

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...