Jump to content
SAU Community

Limped My M35 Home

Dunc

By Dunc,
in Four Door Family & Wagoneers

 Share

Recommended Posts

  • 1 year later...
bigkevracer Grand Master

bigkevracer

Posted
Posted

Mine started doing the same thing this morning. Started fine, CEL came on, then got half way down the street when I realised I couldn't rev above 2100.

As soon as I happened I figured it was the AFM, I was just hoping someone could confirm the part number.

I've seen 22680-6N211 bandied about, and cheapest I can find it for is $202 (http://www.g35parts.com/Nissan-part-number-22680-6N211-p/22680-6n211.htm)

However there is another thread where 22680 6N201 is quoted, which is HEAPS cheaper (http://www.ebay.com.au/sch/i.html?_from=R40&_trksid=p3907.m570.l1313&_nkw=22680+6N201&_sacat=See-All-Categories).

Can anyone confirm what the right part number is, and how much I can expect to pay?

If anyone has a working spare now's the time to speak up! :) As soon as I get the Fcon in I'll be running the MAP sensor anyway, just need one to see me through about 1-2 months.

Commsman Veteran

Commsman

Posted
Posted (edited)

Pretty sure I heard Iain say a X-Trail one is the same. Might be a a 2nd handy around (local wrecker) if you only need it for a few months. Otherwise they mightn't be too expensive new from Nissan. If you buy one, it will only be a matter of time before you can sell it to someone else with the same problem, haha

Edit: found the post from Iain- "...same as a t30 xtrail - 22680-6N211. thats for the hotwire only, not the whole tube - which isnt required anyway"

Edited by Commsman
bigkevracer Grand Master

bigkevracer

Posted
Posted

Yeah I found that post too, thanks Leon.

Only thing is I've found the 6N211 is ~$200, and the 6N201 is ~$80.

Big difference in price for a hotwire. Iain thinks they're ~$300+ RRP from Nissan, have to check with them Monday. I'll check the local wreckers but last time I called them they tried to shaft me big time.

Commsman Veteran

Commsman

Posted
Posted

I just found the awesome forum thread too, & it sounds too pricey for my liking. If you can do without driving your car over 2500rpm for a while, the cheaper option would be the go.

Commsman Veteran

Commsman

Posted
Posted

Iain blew his by sucking in fine red dust @ Coffs rally. Apparently his filter didn't seal perfectly against the airbox.

Could your failure be related to you running that pod filter...? I think I may have commented previously "no free lunch", lol.

zei20l Grand Master

zei20l

Posted
Posted

6N201 is the plastic tube that the AFM fits into. the 6N211 is the actual hotwire which you need.

yeah mine copped some dust and blew. but it was a 2nd hand one off the wreck, so it was bound to go soon anyway.

the part number Leon has quoted from the M35 stagea forum is the correct one.

bigkevracer Grand Master

bigkevracer

Posted
Posted
Could your failure be related to you running that pod filter...? I think I may have commented previously "no free lunch", lol.

How did I know you'd bring that up? :blush:

Cheers for the part numbers guys, will order one tomorrow. As for whether it's the pod's fault, I was planning on replacing it so I might get that nutted and see if another one goes.

For all I know it's still the original AFM, so I'm not too worried yet.

bigkevracer Grand Master

bigkevracer

Posted
Posted

$240 trade from Nissan for the AFM, and it'll be in tomorrow.

I can probably get it cheaper from the US, but by the time you pay for freight, and have to wait for it over Christmas, I figured it was worth it to get it this week.

  • 2 years later...
Dane Enthusiast

Dane

Posted
Posted

Mine started doing the same thing this morning. Started fine, CEL came on, then got half way down the street when I realised I couldn't rev above 2100.

As soon as I happened I figured it was the AFM, I was just hoping someone could confirm the part number.

I've seen 22680-6N211 bandied about, and cheapest I can find it for is $202 (http://www.g35parts.com/Nissan-part-number-22680-6N211-p/22680-6n211.htm)

However there is another thread where 22680 6N201 is quoted, which is HEAPS cheaper (http://www.ebay.com.au/sch/i.html?_from=R40&_trksid=p3907.m570.l1313&_nkw=22680+6N201&_sacat=See-All-Categories).

Can anyone confirm what the right part number is, and how much I can expect to pay?

If anyone has a working spare now's the time to speak up! smile.gif As soon as I get the Fcon in I'll be running the MAP sensor anyway, just need one to see me through about 1-2 months.

Has ANYONE tried a 22680 6N201 ?

  • 4 months later...
wht510 Experienced

wht510

Posted
Posted

I've just had mine fitted (personally!) by Scotty as I was 'stranded' at Nissan.

I was quoted $270+gst from Nissan for the 22680-6N21A version after providing my VIN (informed it was supposedly not the original part number that I had done 115,000K on, but the next revision from Nissan)

NOTE: for those who think it's the AFM that needs replacing: I couldn't get my car to idle at all (5 seconds ish of idling like it was on 3 cylinders and then stopping), and as soon as I disconnected the AFM it was drivable in limp home mode. Got me out of trouble, that's for sure.

Thanks Scotty for the AFM. I'll let you know how it goes (I'll keep noting the fuel economy too).

For those of you who have a NM35 with 100k+ on the clock, I'd even carry one in the glove box just in case you are interstate etc. Cheap insurance!

wht510 Experienced

wht510

Posted
Posted

Oh and I don't think it was dust that did mine. I think it was vibration. I drove to Korumburra recently via kooweerup and the roads out there require a lift kit and 35" tyres.

115,000k's might contribute to that :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Sorry no - The sandtrap adventure ended the day, happened at the end of the last session. At that time I wasn't hearing any weird noises nor were the brakes shuddering anymore. It was only when watching the videos that I remembered I had these sounds early on!
    • MBS206
      Mistakes were made, my R34 Story

      By MBS206 · Posted

      Did the noise appear after your sand trap adventure? Could be something got dislodged and is playing rub rub. Even a rock wedged somewhere.
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      Is there a shroud around the tailshaft spline into the back of the box? They can rub and make a horrible noise if they are not on straight/damaged. The heat might have caused it to grow too much in one direction and rub.
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Strangely I noticed it either disappear later in the day, or not be present. I definitely noticed when I was crawling around that open wheel thingy entering the pits (that part was audible in car). Driving home and commuting around town for example, I didn't hear it. It's plausible that it was a brake disc or something still slightly in contact. The brakes absolutely felt BAD for the first couple of sessions, huge amounts of shudder and grinding as they got up to temp - And then I actually just forgot about it as the day went on/didn't notice it. The videos were from the morning when this was more present than the afternoon/drive home when it wasn't. I've asked around and got a variety of responses including handbrake shoe contacting hub, CV joints, CB tailshaft bearing as above, and clutch input bearing. I didn't test if it disappeared when clutch was in. I haven't noticed it in any of the other videos nor did I notice it when driving to that extent. More or less hoping the microphone at the rear license plate giving some kind of clue of 'something' but it looks like "spin stuff and see if you can notice it" is the way forward here. I could be smart and use the gopro mic and re-mount it to that location to see if the sound is still present at low speed actually. Sounds like a decent test whenver I have the CBF'ness to drive the car again. Given it's almost 40C for the day of the track day and the next 3 days after, the CBF is high. All I've done since getting home is unpack the car, remove the remnants of the lip and undertray and left it there. I was surprised how well the PMU Club Racers actually worked. The brake performance on the track was absolutely fantastic, best I've ever personally used, no fade whatsoever and the bitiness was almost too good, I was scrubbing more speed off than I needed to, but I also ended up infield when I started trying to scrape off ... less speed.... so...
    • GTSBoy
      R34 GTT idle problem

      By GTSBoy · Posted

      Not really, no. Anything you would do is easily reversible.
×
×
  • Create New...