Jump to content
SAU Community

Purchasing Diff Oil Castrol Saf-xj 75w-140


fungoolie
 Share

Recommended Posts

I'm one of the owners who is getting my car maintained by a non NHPC garage but am using genuine fluids in order to maintain my warranty. It's time to do my diffs and I can either buy the factory specified SAF-XJ 75W-140 for $60 for 500 ml from the local BMW/AMG dealership or else purchase 20 litres for $567 from Supercheap Auto. They don't sell it in smaller quantities. Trouble is 20 litres will last me around 270,000 kms based on the standard service intervals of 30K and 2.2 litres for both diffs so if anyone local wants 10 of my 20 litres I'll be happy to sell it on to you at what I paid for it.

Just out of interest, Nulon specify their 80W140 gear fluid for the GTR and appear to be happy to provide a warranty in case Nissan fails to honour the warranty as a result of them blaming the Nulon for the failure. Interestingly the Nulon says it's a 100% synthetic but I have been told that it's really a highly refined mineral oil. I'm no chemist so don't quite understand the ins and outs of how they can claim that its synthetic when it isn't. Either way I'd rather just go for the recommended stuff than stuff around with that whole blame game process if something was to go wrong with the diffs.

Edited by fungoolie
Link to comment
Share on other sites

nulon have a habit of claiming their fluids are full synth when they're just a GrpIII oil - their argument would be that it's "close enough" to a full synth.

i'd stay clear of Nulon, especially for a R35

Link to comment
Share on other sites

  • 5 months later...
  • 3 weeks later...

motul factory fill diff oils in japan for the r35 GTR greatly increase's lsd performance

read more

http://www.nismo.co....eup/75w140.html

Motul manufacture Nismo oil and all the rnd is done through the gt500 Nismo\Motul GTR

order only through most good performance workshops around Australia

Yes but at the expense of this:

" When using this oil, LSD efficiency will be greatly increased (with especially good high-speed performance), but there will also be greater wear on the LSD's internal clutch plates. Please be aware of this before purchase."

and this:

  • This oil was developed for high-intensity competition driving. Please note the following two points before using this oil:
  • 1. Except in the case of the Nissan GT-R (R35), this product is not covered by Nissan Motor Co., Ltd. warrantees.
  • 2. When this oil is used, it should be changed every 3,000 kilometers.

So pretty much track use only? And has Nissan confirmed these warranty claims?

Edited by fungoolie
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Latest Posts

    • Once the airbag is off, to remove the steering wheel.... Undo the 2 plugs into the clock spring, and the horn connector from it's clip. Hit the 19mm nut with a rattle gun (preferably) or if you don't' have one, you probably want an assistant to hold the wheel in place while you use a breaker bar to undo the nut Then, screw the nut back on 3 turns, and pull the wheel sharply towards you. If that doesn't work hit it medium force with a rubber mallet on either side, or possible behind if you can get there. If that all fails (it shouldn't!) you might need a steering wheel puller
    • So, to next task....the carbon fibre steering wheel was either an expensive factory option or a chinesium special. Either way, I don't like either the flat bottom or thick ring style, so it had to go So...to remove the steering wheel.... First, disconnect battery negative and stop on the brake pedal for a few seconds. Then, remove the small circular covers on each side of the wheel's rear surround to uncover the airbag clips. You need to push something like a flat bladed screw driver through, you need to push the steel clip inwards and pull the side of the airbag forward. Once you've done the easy side, same on the centre console side. You can see the tab you are shooting for circled in red Then, disconnect the horn spade connector and for the yellow airbag plug you need to get something small under the black locking tab to pop it out, then the connector releases......airbag is off  
    • @99RS4just wondering if you ever took photos of the footwell lighting / how you bypassed the controller, im keen to haver footwell lighting come on when I open the doors too   
    • Ultimately, if the tip is not far into the runner and the o-ring seals, then you are in business. Have you applied pressure to it as is? It is not really a problem for the injector to twist once it is bolted down, the oring seals it and you don't want it jambed into the oring too hard The plenum is intended to take multiple size lower injectors with different adapters, but the way you have it is fine if they seal.
    • Are these the Dmax ones you are in reference too? https://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35#description Not a bad idea to get the uni flange ones. I have sent just jap an email too. Will see what they say lmao. Only thing is the Dmax ones are on a big back order. Low key anything will be better then my OEM ones I got as they are sounding like popcorn when I go under load lmao 😂☠️🪦.
×
×
  • Create New...