Jump to content
SAU Community

Recommended Posts

Like many of you guys, SAU is a once a day, once evey 48 hours fetish.

So I visit the other Skylines sites every so often, GTR.UK, SNSW, SDU etc.

Now this is what I find astonishing. It's not exactly a technical question.

The Americans must have some experience with this as they've been running turbo cars to varying degrees of success since the 70s/80s like the Buick Grand National.

So I found it astonishing that people who know what they are talking about developing RB26 motors to do "400-500 hp at the wheels on 91 PUMP GAS".

Of course anyone in Australia would find that laughable. How is that possible?

I would not even dream of running a stock RB26 on the 91 octane dishwater even in an emergency situation...

oh. btw. these guys are from RBmotoring, Motorex, Nismo American so it's not some hick from Arkansas.

T.

In US, they use PON (Pump Octane Number) = MON (Motor Octane Number) + RON (Reasearch Octane Number) / 2

103 by VP Racing Fuels has a RON rating of 107 and MON rating of 99.

Both Research Octane Test and Motor Octane Test are performed on the same engine but under different conditions, hence you get different numbers as results.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah. "New pump" does not have to mean "massive pump".
    • Well, can you still get an OEM pump, and by the time you're buying a Nismo/N1 etc, just buy another aftermarket pump. It's better to have the pump able to flow more if its needed, than for your pressure to drop off. At any point in time, you're replacing the oil pump in a rebuild. Aftermarket pumps are likely going to be a better economical choice, and they don't have any negatives, even if they can flow more.   Also, when you're saying "replace the pump gears" are you meaning leave a 25+ year old housing in the engine with unknown wear, and just put new gears in? As that sounds silly to me, especially if you do have that minute amount of wear, that means your new pump gears now have a little bit more clearance beside them, which means, whelp, you may not get to build a lot of oil pressure or make a lot of flow.
    • Right, but if you replace the pump gears + put a spline or sine drive gear on the crank on a Nismo/OEM/N1/etc pump at that point do you really still want more flow/oil pressure? Let's say this is a the aforementioned "keep it simple" build, no more than ~400 kW at the crank.
    • Strength. And on the early RB26, full engagement of the pump drive.
    • I really don't understand the point of aftermarket oil pumps if your particular engine doesn't need more oil pressure. As far as I can make sense of it the problem seems to be cavitation from sucking air, maybe the pump gear design with how it interfaces with the OEM crank, and maybe the backing plate screws wanting to loosen themselves. How does flowing more oil fix these issues?
×
×
  • Create New...