Lets Talk Td06's

[XRATED]

While we're on the TD subject...

What combination TD 06's have people run as a twin kit on a rb26, rb28, rb30? I'm thinking about going a little ol'skool.

Cheers

Justin

[STATUS]

While we're on the TD subject...

What combination TD 06's have people run as a twin kit on a rb26, rb28, rb30? I'm thinking about going a little ol'skool.

Cheers

Justin

Seen a few Td05 kits, very similar to -5 and 10cm T517z's.

Or twin L2-20gs on rb30 and 2jz, easy 800hp.

[smithers]

i recently put a t67 25g 10cm on a neo stagea manual, im happy with the way it pulls when on boost, though still on stock tune so response isnt great.

i wouldnt recommend anything smaller on a 2.5

[XRATED]

Seen a few Td05 kits, very similar to -5 and 10cm T517z's.

Or twin L2-20gs on rb30 and 2jz, easy 800hp.

I was thinking 2x L2 20g 6cm if I can find a pair-

Raced 10cm t517z's, have a td05 kit and I wan't a little more...

500rwkw+ is goood.

I've given up trying to fing the 'ultimate' hp v's response turbo set up... I just wan't somthing that puts a big smile on my face!

Cheers

Justin

[STATUS]

Twin l2's

[zebra]

I was thinking 2x L2 20g 6cm if I can find a pair-

Raced 10cm t517z's, have a td05 kit and I wan't a little more...

500rwkw+ is goood.

I've given up trying to fing the 'ultimate' hp v's response turbo set up... I just wan't somthing that puts a big smile on my face!

Cheers

Justin

Could go twin T67 25Gs like the JUN Hyper Lemon R33 GT-R lol

[zebra]

Also I pulled my supposedly modified Trust TD07S, and its not, So I may end up using It as Split Pulse T4 manifolds are in abundance for the 1JZ's, So it has the same comp wheel and housing as the T67 but has a larger Rear wheel and a 14cm^2 rear housing, If I can find a 10 or 12cm^2 turbine housing for it Ill be cheering, but so far no luck finding anything smaller than the 14

[rb30dett]

I have a 10cm rear housing off a td06

Twin kits:

td05-16g 6cm 400rwkw max

td05-18g 6/8cm ?

td06-20g 8cm 500+

td06l2-20g 8cm ?

Edited October 14, 2010 by rb30dett

[STATUS]

I have a 10cm rear housing off a td06

Twin kits:

td05-16g 6cm 400rwkw max

td05-18g 6/8cm ?

td06-20g 8cm 500+

td06l2-20g 8cm ?

td06l2-20g 6cm x 2 seen 600rwkw on my dyno.

[XRATED]

td06l2-20g 6cm x 2 seen 600rwkw on my dyno.

... yep that'll do nicely.

Any chance of digging up they dyno sheet Trent?

Cheers

Justin

Edited October 14, 2010 by XRATED

[Roy]

The 6cm housing in soooo small. I am amazed any turbo cna make power with such a small exhaust housing?!?!?! I had one that I was going to try on my TD06 and RB20. It didnt make it anywhere near my engine bay as the thing was so small that no way could it past 2L worth of air effeciently...or so i thought?@?

[XRATED]

It would be very interesting, especially with 2x well sized wastegates.

[STATUS]

The 6cm housing in soooo small. I am amazed any turbo cna make power with such a small exhaust housing?!?!?! I had one that I was going to try on my TD06 and RB20. It didnt make it anywhere near my engine bay as the thing was so small that no way could it past 2L worth of air effeciently...or so i thought?@?

i tried a 6cm on a sr and it was a disaster so you did good

its was a 45 degree power line... not a curve.

[rb30dett]

Yup 6cm rears are for twin td05's on an rb26 that's what the 16g kits come with. The tdo6 kits have 8cm housings, I am more interested in the twin l2-20g with 6cm housings making 600kw are you sure they were 6cm?

[Roy]

Took some more pics of the turbines as I played with the turbos i have laying around.

If you look at the L2 v H turbine you can see why people prefer the L2 on the 2L RB20 and SR20 setups.

[discopotato03]

These are a few things I found concerning TD06 family turbines .

The thing that I haven't been able to nut out yet is how to distinguish the 11 from the 12 bladed turbines and where each is available ie from TD06 Std/S/H/SH etc .

Mark at GT Pumps should know for sure .

A .

Edited October 17, 2010 by discopotato03

[talky]

hey lads any off you got some basic info on the td05 18g

[RBceffy25]

some great info here!

[bigmikespec]

hey lads any off you got some basic info on the td05 18g

http://www.evocoupe.net/forum/viewtopic.php?f=2&p=38780

[Psymon]

Don't want to hijack the topic, but since we're on the subject.... what are my options for an RB20 if i wanted a TD06 similar to what Roy is using, but with a T3 flange? The reason i'm looking for T3 flange is because the car already has a HKS cast low mount manifold and external gate on it which i wouldn't mind hanging onto, if only for convenience sake.

I also have a set of HKS cams lying around that i'd like to have a play with at some point. I only mention this because i'm not sure if this should effect the turbo choice now or if its something i should just worry about later on.