Jump to content
SAU Community

Recommended Posts

Hey

Just on the look out for an R33 GTR, was just wondering, can you tell a Series I apart from a series II just by looking at photos, I have no idea if there even is an external difference. I know that stuff like grills and that kind of thing get changed alot to the later series in commodores, but is there something that is hard to change that will give it away in an R33 GTR. I have found that in 96, series II were produced, but does that mean from the begining of 96? If some one could help me with this question, I would be very thankful. Also, Is there a website that someone can point me to that will compare an R33 GTR series I to a series II.

Thankyou

Edited by den15b
  • 2 weeks later...

electrically they are differnet I can tell you that much. in most of the S2 ones I have worked on they had smart entrance fitted. the S1 did not. dash cluster and main panel differ - there are otehrs but htose ar the ones I can name off from memory.

  • 1 month later...

Chris what does the smart entrance thing actually do? I happen to have mine right in front of me and was googling to see if it did anything. I know it's got the buzzer in it, but have no idea what else it's "supposed" to do.

smart entrance controls the inside lights,door locks and chimes. in earlier cars they were separate modules.

FYI S3 is different again.

smart entrance controls the inside lights,door locks and chimes. in earlier cars they were separate modules.

FYI S3 is different again.

OK, now you just showing off Chris !!

I think series 2 should also have passenger side air bag where as S1 it was a very are option

and if you have the option try to buy a S3 one with the Projector head lights, for some reason, they look lot nicer..!!!

Thanks Chris. I'd still love to find a proper skyline drivers side actuator and whatever else I need to make the central locking do both doors. Was thinking this smart entrance was part of that. Not that my keyless entry system doesn't work, but turning the key in the drivers side door is very hard to do. I still think the actuator is in the wrong place :P

Edited by KrazyKong
  • 1 month later...

OK, now you just showing off Chris !!

I think series 2 should also have passenger side air bag where as S1 it was a very are option

and if you have the option try to buy a S3 one with the Projector head lights, for some reason, they look lot nicer..!!!

Hi Chris, Seeing as you are a guru with all things electrical in Skylines can you tell me how the door locking feature should work when operated with the doors closed in a GTR33 Series1,at the moment if I lock both doors from the inside whilst in the car you can still open the drivers side door from the outside,I assume something was not connected properly when the compliancing was done,I am fairly sure the locking knob on the drivers door does not close when the lock is electrically activated however central locking works properly locking both doors when the key activator is used when outside the car.Cheers GREYPEARL.

Den, do a search mate, there's a lot of info on this in the archives. There are few differences between S1 and S2, the bigger differences came in S3 such as red colour interior instead of blue, upgraded ABS xenon headlights, rear fog light, additional ducts in the front bumper and a deeper chin spoiler

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Here is a recipe. Sonic blocks till you get one that has a good enough bore. Get a torque plate and block brace, use your choice of fasteners (arp ect) bolt the thing together empty, half fill it and let it cure. Release it when it has, go to a REPUTABLE RB Builder and get the thing line bored/honed and cylinder honed to size, then wash. Once its all clean and dandy, wash and blow it out again. Then again.  Assemble said engine to your desired clearances with oil control mods, gasket to suit desired CR/Squish ect. Attach your extended sump with proper trap door oil baffles and head drain plumbed to sump with a SUMP BREATHER SYSTEM. Build your front diff with a decent LSD, rebuild your transfer case with a few extra plates, more than likely replace your tailshaft centre bearing and tighten up the rear diff. Tune to minimise excessive midrange cylinder pressure (timing unless you like to split bores and rebuild engines) Enjoy your engine, but hate the fact you are now destroying engine mounts, gearboxes, gearbox mounts, diff output flanges and driveshafts, diff mounts, tailshafts and front CV's.   Disclaimer.... Ive never done any of the aforementioned stuff.......
    • 440s will support well over 400HP on petrol, which is a decent place to be for an RB20. 230+rwkW. Will be a safer bet for idle/low load. 550s would be nice for the extra headroom. I've made the same decision with mine (Neo25). 1000s are probably too big for the Nistuned ECU, so I have some smaller ones.
    • Appreciate everything guys. I did go ahead and get an alignment... most of my complains are solved. Car is not perfect, but it's good enough. If I notice uneven tire wear or anything I'll just take everything back to stock.  Thanks again!
    • They still have not shipped the 550cc injectors as they weren't in stock, so in theory I could ask to get the 440cc ones instead, if those work better in my scenario. They're the same price so really shouldn't be an issue. Unfortunately I am not so knowledgeable in most parts of tuning so I wasn't sure what's best to choose between the two. 440cc ones are the lowest they have (not in stock, but available to buy nonetheless).
×
×
  • Create New...