Jump to content
SAU Community

Recommended Posts

hey parting out my 2000 s2 stagea manual would like $6000 for the whole car or let me no what you need and we can come up with some sort of price agreement should be able to arange shipping on most stuff so hit me up with some questions and ill do my best to help you all out all panels are silver thanks

Edited by Goodo
Link to comment
https://www.sau.com.au/forums/topic/339718-parting-out-2000-s2-stagea-manual/
Share on other sites

  • Replies 172
  • Created
  • Last Reply

Top Posters In This Topic

iimported this car about a year ago it had a 34 gtr front on it so i couldnt get it complied and when i attempted to get it complied by swapping everything back to standard stagea ie guards headlights and what not i found it had been in a front ender and none of the original panels lined up and nothing was straight so i just bought another one and put the 34 front on the new one so now this one has to go to make some of my money or at least attempt to

so the dash reads 18000 klms but the import papers i got with the car say 56000 klms or i think so not 100% sure on the actual klms on the car but either way they are both low klms

i have had a few pms about the whole manual conversion so the console will go with that but if no one takes the conversion then its up for grabs and yes it was imported into melbourne last year it is probably the same car as you saw

hey mate can i get the center console?? and how much? and was this car imported into melbourne last year?? i remember seeing one just like it at a mates workshop b4 compliance

Verry keen on everything for manual conversion besides the box cos i can find one here cheap just waiting for just cars to pay me out for my car that was stolen

RB25 or RB26?

2 or 4wd?

will take engine/harness/ECU off your hands if 4wd.

its a 25 4wd

how much? - complete running engine with harnesses/ECU and dump off the turbo?

I'd be keen on the Twin-Unicorn badge from the Grill if it's still on there.

Unfortunately noob status prevents me from PM 'ing. Feel free to chuck me an email at: [email protected] if its going.

I'd be keen on the Twin-Unicorn badge from the Grill if it's still on there.

Unfortunately noob status prevents me from PM 'ing. Feel free to chuck me an email at: [email protected] if its going.

sorry no badge on the grill only the rs badge

so i will start this up again with a list and some prices not sure what stuff is worth so if you think its to dear dont be a jerk about it just let me no as i am willing to take reasonable offers also if someone could tell me a way to put pics up that actually works it would be greatly appreciated

drivers door minus mirror and interior trim $150

driverside rear minus interior trim $150

front passanger door has a small dent minus mirror and interior trim $100

back passanger door has small dent minus interior trim $100

front guards $80 each

bonnet $150

front and rear bars $150 each

haedlights a very small amount of frosting non xenon $350

high beam l&r $150

front bar reo $75

tail gate with standard wing $150

all panels are in silver

rb25det neo loom and ecu awd not sure on the klms 18000 or 56000 $2500

r33 gtr radiator $150

manual gear box no noises or klunkiness but the awd was not working not sure why or what this means $400

so now for the bit every body has been waiting for the manual conversion bits now i no what these are worth and how hard they are to get so dont be scared at the price. and this includes

clutch pedal

break pedal

clutch master cylinder

hand brake

manual console

$1000

manual instrument cluster reading 18000 klms or so $250

the center bit with the guages and the climate control thing $250

full set s2 tail lights $350

full manual interior both front seats back seats and the four door trims even the carpet if you want it for any reason $700

so there is pleanty of other stuff but this is the main stuff keep your pms coming and i will send at buyers expence of course

Edited by Goodo

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • @soviet_merlin Thanks mate!  Nothing too major but will hold me up for a while. I've got lymphomas to get taken off the back of my neck and the middle of my spine which always conjures scary thoughts!  It sounds worse than it is. Yeah great, conjuring more rabbit hole deepening , just what I need! 🤣  
    • I'd argue the F50 kit I got is very good value. For ~2k I got the calipers (refurbed condition), adapters, pads, brake lines, rotors, and top hats. I think you'd be pretty hard to get Evo/GTR/350z brembos + the additional hardware for similar money. Used market for a pair of front calipers alone I've seen tend to run anywhere from $1500-2000 depending on condition.    That said, something like a GTR or 350z brembo is a lot easier to adapt to the Silvia. 
    • Is there a significant price difference between the Evo/gtr/350z brembos vs the F50? Looks amazing.
    • I was actually being a tightarse at the time LOL... My OCD is tickling me into running a 2nd 8AN Teflon hose all the way down and removing the 2x OEM hardlines. My other side of my brain is telling me to run 2x hardlines front to back (also acts as a fuel cooler, so win win).
    • As I mentioned in an earlier post, I had some trouble with the Silvia's brakes dragging back in 2023. I managed to sort it out then, but the same problem came back to bite me late last year. Just take a look at the picture – I had a feeling the handbrake was acting up again, and I was right. Anyway, I'd been wanting to upgrade to bigger brakes for a while. Not that the Silvia's brakes were bad, but it was more of a "want" than a "need", you know? It was funny, though – at the time, I couldn't find any Evo Brembos, 350Z Brembos, or GTR Brembos for a decent price (of course, tons of them popped up online after I already bought my kit!). I ended up going with an F50 Brembo kit, which came with adapters, brake lines, 330mm rotors, and top hats. The F50 Brembo caliper was used in a few other cars too, like the FPV. I also decided this was the perfect opportunity to ditch the Silvia's ridiculous rear brakes and that awful handbrake (some of you were definitely right about that!). I picked up some R33 calipers and all the necessary bits – rear drums, backing plates, and new hardware to refurbish the calipers. Of course, it wouldn't be a project without a few hiccups. Turns out the brake master cylinder was playing up and basically (to put it simply) keeping the brakes engaged. I had it overhauled, and after some adjustments, everything was working again. The whole process took a while, as you can imagine. To top it off, the front right wheel bearings were shot and needed replacing too. This is a rare occasion where I'm posting an update while it's all still fresh! These pictures were taken just this afternoon.
×
×
  • Create New...