Jump to content
SAU Community

Recommended Posts

  • Replies 172
  • Created
  • Last Reply

Top Posters In This Topic

most half cuts go for 2500 ( r33 ) but not stagea half cuts.

u say 1500 but thats for a r33 motor, box ect not a s2 awd stagea that has a r34gtt rb25.

price is good i think

Edited by whitenight27

haha true true too much boost.

i shore goodo thinks its worth what his asking for.

the extra 1000 is because its a r34gtt and not a older r33 motor.

for 1 the turbo is a lot better than the 33.

the 34 turbo can run little more boost and has a bigger rear housing but still responsive

33 turbo has a ceramic compressor wheel while the 34 turbo has nylon compressor wheel and better for hi-flowing

i will just say don't think u will ever get a 34gtt motor ecu and piping for 1500. r33gtt yer no probs

34 will have low ks and a lot newer motor than a 33 rb25

Edited by whitenight27

whiteknight27you will have to be a little more clear when you say what is left. I prob dont have much that you need but if you ask for what you actually need i will be able to answer yes or no . As for the 34 front it went on to my new one

menthol369 sorry but the motor is gone got $2300 motor loom and ecu

thort u would get around 2k for it lol.

any how need things like

peddle box

console

hand brake and cable

any thing i would need to change my auto 2 man

I belive i do have the peddle box and clutch master cylinder but i think thats about it

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It doesn't look like there's a lot of options out there these days, and what's out there is performance oriented aftermarket stuff (with the GTR markup) I wonder if there are other cars with similar springs, after all its just a matter of length, diameter and stiffness. Alternatively, I did see coil spacers. Probably not the best option, but could be serviceable too.  
    • Final thought for now. Obviously the reason I was in there was to check everything is OK cooling wise, pull out the radiator to flush it etc, but I have to say the factory has done a hell of a lot of thinking about air management in a way they never did back in the R chassis days. The Redsport/400rs have (from engine forward) 2 large shrouded fans - radiator (incl AT cooler) - AC condenser - Intercooler Heat Exchanger and Oil cooler. There are shrouds and foam around everything to keep it pretty well sealed, which is good in that they have it sorted from factory, and bad in that I can't make any meaningful improvements there. The second red sport pump water pump is mounted in front of the rad in the airflow, so I will see if there is somewhere else I can stash that (unlikely, it is tight in there). The horns which are also in the rad airflow will be moved somewhere else, and hey who needs 2 when 1 would work For track days, I can also remove the lights which would block some airflow. Factory has already taken the smart option of ducting all air that went through the oil cooler down and out of the engine bay. This pic is taken from below looking up, so air comes through the cooler at the top of the pic then hits the shroud and is directed down and out of the engine bay through the engine bay lower cover Which of course is good for oil temps, but doesn't help the rad as it diverts 10-20% of airflow away So, no big improvements to be made here, I'll flush the rad out and put it all back together.....    
    • It looks so incredibly busy in there! 馃槷 
    • Next..... That escalated quicker than an Elon and Donald break up! I'll post up a specific DIY for radiator removal on these, but all I'm saying is that if you get a workshop to change your radiator for any reason and they give you a $1000 bill for it, go and hug them and thank them for not charging all the hours it took.....what a bastard of a job. I'll make some adjustments as I put it all back for faster access in the future, but it was a nightmare.
  • Create New...