Jump to content
SAU Community

Recommended Posts

hey guys im justin and im a proud owner of a r33 gtst for 1 yr and 6 months and im still learning bout my skyline.....and theres two buttons inside my r33 thats killing me ... so i hope u guys can help me the 1st buttons is the spolier up and down button and the 2nd button is the button next to the a/t u know the button its says power/snow i really really wanna know wat that but is and does pls...........so to refresh ur mind wat does the spolier up down button do and the button NEXT to A/T pls help its drivin me insane

cheers justin

Link to comment
https://www.sau.com.au/forums/topic/339944-help-with-these-two-buttns/
Share on other sites

You must have an auto right?

1. The power means it will change it down a gear for more torque, makes the car have a more aggressive feel and more torque. Also, it changes gears later in the rpm range.

The snow starts in 2nd gear for less torque, and keeps it in a lower rpm range, so it has less chance of wheel spin. Good for driving in muddy situations or snow.

So, you should have more torque in power mode and much less torque in snow mode.

2. As for the spoiler up and down button...to me it sounds pretty simple, but I have no knowledge of this in Skylines. If the button doesn't work maybe the motor for it is broken or your car has an aftermarket spoiler, which made the button obsolete. Who knows. :D

Please correct me if I am wrong people.

Hope this helped Justin.

Cheers.

^^^ correct.. The spoiler up/down button is for a front spoiler you may have had and its been removed.. look under the front, or get a mate to press the button while you look under your front bar.. if your front bar is aftermarket then it has definately been removed..don't worry about it..

  • 1 month later...
^^^ correct.. The spoiler up/down button is for a front spoiler you may have had and its been removed.. look under the front, or get a mate to press the button while you look under your front bar.. if your front bar is aftermarket then it has definately been removed..don't worry about it..

I have this button and a standard front bar but no spoiler, dont suppose you have any pics of it, i have not been able to find a single bit of info on the spoiler.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • AFM looks to be a z32 The injectors maybe old Nismo 555cc The turbo tag when looked up seems to be a gt2871 , imagine it would have the bigger rear housing .82 all look like the mid 00's mods when he started building it up. Vac hose seems right but would need to see a diagram. Great work going up there and sorting it out, be a good club car for someone wanting a good reliable rig.  I know I would like to have it but no space and too many other race cars at the moment.
    • Heys guys I got a r32 gtst speedo is out by 10kph seems the faster I go the more it be out  just seeing if anyone else had to problem and knows how to fix it 
    • I can't agree. If we hadn't all been brought up with the noise caused by the inefficiency of an ICE, no-one would actually ask for all that. An EV is like any other car, it just goes better. 
    • 2 more things I have to work out Easy one first...can anyone describe how to pull the fuel pump and sender from a 33? I can feel there is some sort of mount and clips but don't have a manual and don't know the trick......if not I'll spend some quality time in the boot witha lighter tomorrow. Second question is harder.  He had changed the upper plenum to a plazmaman but clearly got to a point with the vacuum hoses where he said "f**k it, I'm going inside for a beer" and never came back to that job because it was a mess. Am I right to think that I need: 1. Pre throttle (16mm nipple on inlet) to AAC's main 20mm fitting as the main pre throttle feed 2. ACC has a second 13m outlet joined to that 20mm fitting which I think is the pre throttle air supply for the cold start valve? 3. Cold start valve's outlet fitting then goes to Plenum (to bypass throttle?) There is some adapter on the back of the ACC with 2 fittings (13mm and 10mm), do I run the 10mm through a 1 way valve to the Brake Booster (4) and the 13mm back to a 13mm nipple on the Plenum as the Idle control (5)? 6. Run a 6mm vacuum line from the Turbosmart BOV to the Plenum? 7. Run a 5mm vacuum line from the Fuel Pressure Reg to the Plenum? 8. Run a 5mm vacuum line from the Turbosmart Boost controller to the Plenum? (Wastegate already has a pre turbo pressure source running to the solenoid then the wastegate on the other side of the bay)  Any help appreciated, the GTR is quite different setup and while the Stagea also has FFP it is different again. (And no Dose, I'm not pissing it all off and putting a ethrottle on it....)
    • OK, onto some questions to try and speed up the process a little. Does anyone know what core this Garret is? I know it is a high flowed standard turbo but nothing else about it. Tag says OK 0169J - 446179-5032 Same question for the injectors, I don't know what they flow and ideally can work it out before it hits the dyno, they are a mustard yellow side feed
×
×
  • Create New...