Jump to content
SAU Community

Apexi Avcr Wiring Help

Aaron BNR32 GTS-T
 Share

Recommended Posts

Aaron BNR32 GTS-T Collaborator

Aaron BNR32 GTS-T

Posted
Posted

i got an apexi avcr boost controller (second hand) and it didnt come with a loom so going to make one up

so just wondering if anyone can help me out by telling me which wires go where

i know the:

red-ignition power

purple-RPM.injector signal

green-ground

black-ground

gray-throttle signal

white-speed signal

as per the apexi wiring pdf on the net but i need to know which wires go to the

boost control valve (pink and black wires) and the pressure sensor (pink, white and black wires)

thats the:

yellow wire

pink wire

blue wire

brown wire

orange wire

pics below

11102010580.jpg

11102010581.jpg

so if anyone can help me out and let me know which one goes where that be great

cheers

ow and if ive posted in the wrong spot could mods please move thanks

Link to comment
https://www.sau.com.au/forums/topic/340014-apexi-avcr-wiring-help/
Share on other sites
DVS JEZ Grand Master

DVS JEZ

Posted
Posted

i think you have answered your own question in a way,

your showing the pics of the boost sensor- pink, white, and black so connect these to the matching at the master, then boost control solenoid dark pink and black, connect these to there matching at the master, (the black is a common ground so ground all these to the same earth,

you need to find an ecu pinout for your engine, then at the ecu connect each wire to the relevent matching wire at the ecu,

all the spare wires i wouldnt touch just tape them up unless the pdf says otherwise,

Aaron BNR32 GTS-T Collaborator

Aaron BNR32 GTS-T

Posted
  • Author
Posted

yeah i dont know which ones go where though...

i just need to see if anyone knows which colour

goes to which one cause i dont want to stuff it

up lol so if anyone has one that they can look at

and see what plugs go where and the colours

they match up with that be great.

as for the ecu positions i have that already i got

it off the pdf

Aaron BNR32 GTS-T Collaborator

Aaron BNR32 GTS-T

Posted
  • Author
Posted (edited)

yeah what dose the filter do? do you know where to get one?

i know it wont be hard to match the wires but i need to know which one goes where lol

as you can see in the pic i got the unit and pressure sensor and boost control valve

so just need to join everything up

12102010584.jpg

Edited by Aaron BNR32 GTS-T
DVS JEZ Grand Master

DVS JEZ

Posted
Posted

i dont get it...

run the

red-ignition power

purple-RPM.injector signal

green-ground

black-ground

gray-throttle signal

white-speed signal as stated in your 1st post. and join these at the ecu to correct wires

then the boost sensor mounts in your engine bay, run a boost and vacuum line from the inlet manifold to it, then join the pink black and white wires back into the AVCR master screen thats mounted on your dash, solder and insulate

,

mount the boost solenoid near the turbo but away from excessive heat, run a boost line to the turbo actuator and signal line from the turbo intercooler pipe or similar, run the dark pink and black wires back to the master avcr screen and join solder and insulate.

DVS JEZ Grand Master

DVS JEZ

Posted
Posted
i dont get it...

run the

red-ignition power

purple-RPM.injector signal

green-ground

black-ground

gray-throttle signal

white-speed signal as stated in your 1st post. and join these at the ecu to correct wires

then the boost sensor mounts in your engine bay, run a boost and vacuum line from the inlet manifold to it, then join the pink black and white wires back into the AVCR master screen thats mounted on your dash, solder and insulate,

mount the boost solenoid near the turbo but away from excessive heat, run a boost line to the turbo actuator and signal line from the turbo intercooler pipe or similar, run the dark pink and black wires back to the master avcr screen and join solder and insulate.

DVS JEZ Grand Master

DVS JEZ

Posted
Posted

no offence but i didnt think i could make it any clearer.

have a look at the pics in your 1st post,

boost solenoid

dark pink----------to-------> dark pink on the avcr master

black----------to------------>black on the avcr master

boost sensor

pink-----------to---------->pink on avcr master

white---------to----------->white on avcr master

black---------to---------->black on the avcr master

Aaron BNR32 GTS-T Collaborator

Aaron BNR32 GTS-T

Posted
  • Author
Posted

they wont work cause they receve the signal from the engine ecu with the wires i already know and process the infomation in the avcr unit and then send the info to the pressure sensor and control valve to open the wastegate via the colourd wires i dont know hence me needing to know

http://www.apexi-usa.com/content/pdf6115.pdf

DVS JEZ Grand Master

DVS JEZ

Posted
Posted

ok couple of minutes on google for you

The colours on the harness side are correct to the avcr.

Pressure Sensor Pink goes to AVCR Pink

Pressure Sensor Black goes to AVCR Red

Solenoid Valve Red goes AVCR Yellow

Solenoid Valve Black goes AVCR Brown

Solenoid Valve White goes AVCR Blue

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • silviaz
      R32gtr sputtering and stalling

      By silviaz · Posted

      How do you go about diagnosing ecu's that don't have data logging, is it more experience at that point and just trying out things that you think will fix the issue?
    • MBS206
      R32gtr sputtering and stalling

      By MBS206 · Posted

      Stock O2 are basically useless beyond anything at stoich. Any misfire will also be seen as lean. The stock O2 also read a collective exhaust gas volume, not each cylinder. Sputtering and missing means not each cycle is firing, and some are. Which means even if rich, as shit, on cylinders as they miss, they'll read lean, but the cylinders that did fire will read rich, and combined, well, they can read anything from rich to lean.   Start with the basics before even going looking at sensor values.   Edit: I say the above, and that's coming from the guy with a few thousand dollars worth of scan tools sitting right beside me right now that I use frequently for my job.
    • sk8boy204
      Auto GTS4/Stagea transfer case.

      By sk8boy204 · Posted

      I just finished up a manual swap and I have a 1999 S2 AWD automatic in my garage, depending on where you are located. I'm in the the midwest of the US.
    • r32-25t
      R33 GTR N1 REO on an r32 ?

      By r32-25t · Posted

      I’ve heard it can be done, you need to redrill the holes where they bolt to the chassis and apart from that they are the same. I’ve never done it or know anyone personally that has, it’s just something I’ve heard 
    • joshuaho96
      R32gtr sputtering and stalling

      By joshuaho96 · Posted

      If it's reading full rich prior to a misfire that gives one directional hint, if it's already reading lean, etc. If it's reading pretty cleanly stoichiometric then suddenly drops out from a misfire that suggests it's not air mass estimation that's the problem. Could be ignition, could be something more subtle. Could be the CAS has decided to start dropping out at random or the drive pin is worn leading to excessive lash and trigger errors. LTFT can tell you the same but it's slower to react and if this is a recent issue it might not have stabilized. STFT stuck in one direction vs fluctuating back and forth can be used instead but I like to read O2 voltages anyways and interpret directly. If the O2 voltages make no sense in general or are super slow to react it could also be a failing O2 sensor. There's no real error correction for failing O2 sensors in these cars.
×
×
  • Create New...