Fmic With Stock Air Box

[LNah]

Hi all. Just wondering which fmic kit uses a similar design for the outlet piping to the plenum as shown in the image or can the piping be found seperately? I already have a FMIC, but due to the U pipe that goes to the plenum getting in the way, my stock air box can't have the snorkel fitted. I wish to have the snorkel back, so anyone has an idea or does the piping need to be fabricated?

[krzysiu]

I got the U shaped pipe from the plenum with my stockairbox and snorkel on. I just have the snorkel trimmed a little and it fits no probs

[Birds]

Yeah, ditch the current for a return flow if you can be bothered spending the money...cops won't bother you for it and the factory airbox/snorkel will fit!

[ClutchBurndout-:(]

good luck getting your oil filler cap off lol

[joeyjoejoejuniorshabadoo]

well considering the one in the pic says "plazmaman" then i would guess that plazmaman make them

http://www.plazmaman.com/

[ClutchBurndout-:(]

[Kris..]

just get a return flo kit, heres mine with stock airbox

[LNah]

My airbox is exactly the same as yours is and it's probably breathing in hot air without the snorkel. Btw, you got the engine bay painted? Looks wicked!

Thanks for the suggestions and info, guys. A turn flow cooler will probably be my best option since I'm thinking of ditching the current one anyway. It's all corroded. Anyone has an idea of how to get the corrosion off on the exterior?

just get a return flo kit, heres mine with stock airbox

[ClutchBurndout-:(]

i dont see the snorkel fitting with that setup either...

[Birds]

Point of a return flow cooler is to use the standard piping...therefore the factory snorkel and airbox will work with it fine. You have an R33, I have an R33, trust me

[THR34T]

kris's snorkel fits like he said with a bit of trimming.

[krzysiu]

haah bez nice one, was just about to post a pic

[HEKT1K]

that's more than a 'bit' of trimming! you'd definitely want to have some other CAI going on elsewhere

OP, get a turnflow kit and worry no more

[krzysiu]

that's more than a 'bit' of trimming! you'd definitely want to have some other CAI going on elsewhere

OP, get a turnflow kit and worry no more

You know i got a CAI #1 reason for air feed was to cover the area where you could see big turbo

[HEKT1K]

haha yeah it's handy for that

[ARTZ]

I did this by turning my pipe around...depends on the kit but i guess

Edited October 15, 2010 by Arthur T3

[Basti]

winrar. but you still have a hole in your chassis for the pipe = defect if the cop is a dick

[Kris..]

nah mine doesnt fit as its an r33 airbox in cefiro engine bay, i tried using the snorkel for the ultimate stock look but couldnt get it to work

LNah; nah engine isnt painted just standard haha