Jump to content
SAU Community

Recommended Posts

I've just had one of the above mentioned installed, and i'm stumped as to it's usage.

I've read a version off the Internet, but i'm not understanding it. All i wish to do is set boost to 12psi for every day/all day use. Nothing really special. Can somebody help me with this? If so, that'd be great, and much appreciated.

Link to comment
https://www.sau.com.au/forums/topic/34079-blitz-dual-sbc-type-s-operation/
Share on other sites

turning the mode knob on the left cycles thru 1,2,3,4 plus some other modes im not sure of. 1-4 can be preset at different settings ie high to low boost. Start with 1. Pressing the right knob in (volume) cycles thru the units display. It goes thru boost guage, PEAK, and the boost set point which is between 0-100 or 1-99 (i cant remember). Press the volume knob repeatedly until it displays the boost set point. (it will be a just a number. Peak mode display will show PEAK on the unit, and boost guage will show a negative number if your idling)

Once you have this boost set point displayed, press the mode knob in, and the little "1" up in the left hand corner of the display will flash. This means the boost set point is unlocked and you can change it by turning the volume knob up or down, increasing or decreasing the value. Once set press the mode knob again, and the 1 will stop flashing meaning its set and locked.

start with a figure of 10. Set the display to PEAK (will show you the peak boost achieved -press the volume knob till you see PEAK) then floor it in 3rd allowing boost to hit its max. Then check the display. the value it displays will be the boost you have set for mode 1. If its too low, repeat the process and increase the value by a few points at a time until you reach you desired boost.

Yeah, something along those lines.

Cheers mate, i'll give it a go when i get the car back. Having slotted brakes fitted.

But seems easy when explained like that, not in a dodgy engrish translation.

I'm not entirely sure.

My wheel was making a ticking sound, so i had it looked at, and my mechanic said he could re-fit standard ones, of fit slotted 'high heat & hi performance' ones. This is what i got from my mum, who talked to him. As i was asleep, i'll wait and see when i get it back this morning.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...