Jump to content
SAU Community

Recommended Posts

i've never owned a turbo before so i was hoping someone could help me out a little..

im running a completely stock 34 gt-t and sometimes on ignition the boost gauge won't move, not even a slight fluctuation, today i was driving and the gauge had been sitting on nothing, then doing 60 it suddenly jumped to about midway up the gauge, stayed at that pressure for 10 seconds, then dropped disturbingly quickly back to 0, im not sure whether it's because i've only started looking at the boost gauge while driving that i've noticed it goes for ages without moving from 0, i can hear the whirring/spooling? sound but without gunning it, cant tell wether it's active. i had a major service (smooth garage) and immbolizer installed friday if thats relevant at all..

basically i'm dumb, is there something wrong? or is that normal behaviour? only just bought it, i'll be pissed if it's already playing up. :whistling: is my best bet getting a compression test?

cheers guys

Link to comment
https://www.sau.com.au/forums/topic/340898-faulty-turbo/
Share on other sites

i've never owned a turbo before so i was hoping someone could help me out a little..

im running a completely stock 34 gt-t and sometimes on ignition the boost gauge won't move, not even a slight fluctuation, today i was driving and the gauge had been sitting on nothing, then doing 60 it suddenly jumped to about midway up the gauge, stayed at that pressure for 10 seconds, then dropped disturbingly quickly back to 0, im not sure whether it's because i've only started looking at the boost gauge while driving that i've noticed it goes for ages without moving from 0, i can hear the whirring/spooling? sound but without gunning it, cant tell wether it's active. i had a major service (smooth garage) and immbolizer installed friday if thats relevant at all..

basically i'm dumb, is there something wrong? or is that normal behaviour? only just bought it, i'll be pissed if it's already playing up. :whistling: is my best bet getting a compression test?

cheers guys

Sounds like your boost sender has a dry solder joint or its your guage. dosent sound like the turbo its just the electronics

Link to comment
https://www.sau.com.au/forums/topic/340898-faulty-turbo/#findComment-5502907
Share on other sites

Sounds like your boost sender has a dry solder joint or its your guage. dosent sound like the turbo its just the electronics

+1

Don't panic just yet. Get the boost gauge checked out. :whistling:

Link to comment
https://www.sau.com.au/forums/topic/340898-faulty-turbo/#findComment-5502912
Share on other sites

34's quite often have dodgey sender units dont they?

If that is indeed what it is, dont panic at all, its a 30 second fix.

BTW, to the best of my knowledge, a turbo wont intermittently boost, it either will, or wont, not both.

Link to comment
https://www.sau.com.au/forums/topic/340898-faulty-turbo/#findComment-5502927
Share on other sites

34's quite often have dodgey sender units dont they?

If that is indeed what it is, dont panic at all, its a 30 second fix.

BTW, to the best of my knowledge, a turbo wont intermittently boost, it either will, or wont, not both.

thats what i thought, is there anyway i can fix this myself? i think supercheap has 60mm gauges i could grab but installing it would no doubt be a nightmare >__< gauges are half the fun of owning a turbo imo

Link to comment
https://www.sau.com.au/forums/topic/340898-faulty-turbo/#findComment-5502937
Share on other sites

I recently re-soldered the dry joints on normsta's boost sender that was doing the same thing.

If you're comfortable with a soldering iron, it's about a 15 minute job to take it out, hit it with the soldering iron and put it back in.

The other thing that normally breaks about the same time is the vacuum hose back to the plenum. It'll often crack when you try and pull the sender out to replace anyway. I'd suggest try changing the vacuum hosing and then if that doesn't fix it, look at hitting up those dry solder joints. It's the three main ones coming back to the plug. There's a thread on it somewhere if you hit up search.

Link to comment
https://www.sau.com.au/forums/topic/340898-faulty-turbo/#findComment-5502942
Share on other sites

i'm in croydon, i found a tutorial about resoldering the three joins on the chip above the front right tire, scared about messing with it, it's under a three month warranty, doubtful but would that cover this?

Link to comment
https://www.sau.com.au/forums/topic/340898-faulty-turbo/#findComment-5503032
Share on other sites

yeah take it to Jenna save some money and she can show you some things about your car :(

uhhh .. what's a car .. I'm just a girl :whistling:

i'm in croydon, i found a tutorial about resoldering the three joins on the chip above the front right tire, scared about messing with it, it's under a three month warranty, doubtful but would that cover this?

You could ask them - couldn't hurt to give it a shot. :blush:

It's pretty easy to do if you have access to a 10mm spanner to unbolt it, and a soldering iron to re-flow the three joins though :P

The hardest part is undoing the damn clips around the edge of the sensor, I always struggle with that bit.

Link to comment
https://www.sau.com.au/forums/topic/340898-faulty-turbo/#findComment-5503038
Share on other sites

to update, i've checked all the cables and the vaccum line as best i can, all in good working order by the look of things gonna try and pry open the boost control chip case and go from there.

Link to comment
https://www.sau.com.au/forums/topic/340898-faulty-turbo/#findComment-5503138
Share on other sites

managed to get a hold of a soldering iron but i can't seem to get the boost unit case open, i don't want to crack or break it but can't seem to find a way of getting it off

edit:

i mean the larger case just above the right wheel, not the part sitting above the engine

Edited by trappedunderice
Link to comment
https://www.sau.com.au/forums/topic/340898-faulty-turbo/#findComment-5503254
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Uncle Duncan Yeap, FI Interchiller  Works well, normal IAT's cruising with the WTA only went from 50°c+ to 25-30°c with the interchiller  Before, when on it hard, the IAT would see 80-90°c, now, the highest has been was around 38°c IIRC I recommend it for the street or strip where your only on it hard for 10 or so seconds, but it wouldn't be efficient for sustained track use as it would heat soak from the AC turning off or whatever it does during WOT to protect the compressor It really needs the AC running for it to not heat soak and keep the WTA coolant chilled My WTA coolant temps when just cruising is around 2°c
    • Hey Mark...sorry to interrupt your career change to hair dressing... but...did you ever fit the interchiller to the commodore, and if so how was it? And, who made it?
    • I've been pondering this, I really enjoy the convertible thing, for me, it's like riding a motorbike, without all the issue of riding a motorbike, mainly, my old sore arthritic joints getting beaten up, and, being able to do it in shorts and a T-shirt and not needing a helmet and all the other gear required, especially like wearing jackets and pants in the summer, or needing 6 layers of cloths in the winter, or not having wet weather gear handy when your 100km away from home on the bike when it decides to start raining As for the hard top and its Coupe look, whilst I do lose all that open top feeling that I really enjoy, from my experience with the NB with a detachable hard top, the cabin is a much nicer place to be, the difference in noise for one, a hard top quietens down the interior, alot, with the soft top up or down it's pretty noisy, which, after 5 or so hours, can get tiring But, as you stated, the detachable hard top totally changes the look of the car, in a really good way, and for me, the look of a detachable hard top is so much better than the PRHT which looks more like a after thought with its weird bulbous rear roof line For me, the minimal effort of putting in on, or storing it after removing it, is well worth the time and effort for the look alone And yes, I'm sure the next owner will be grateful for it as well.......  
    • I get into huffs with people when I suggest the MX5 looks so much better as a coupe than it does as convertible. Pretty sure I don't prefer the convertible version of anything. Good job on the hardtop! The next buyer will appreciate.
    • IMO wrap does have its uses, but like you said, quality wrap, and professional installation, would probably cost want a quality paint job does, but, the paint, if maintained, is basically for life, and much easier to touch up if required  In other news: it's pissing down here, with thunder, lightning and only some small hail "at this stage", luckily all "my" cars are undercover  I've also been contacted by a guy in Newcastle about the SS, he said he will come down next weekend for a look, we'll see how that transpires I guess 🫰
×
×
  • Create New...