Jump to content
SAU Community

help need wdrivers window motor urgently

bless_you

By bless_you,
in Western Australia

 Share

Recommended Posts

bless_you Rising Star

bless_you

Posted
Posted

hey all, im having a tad bit of a problem at the moment...

my window of my drivers door, r33 gtst has decided to lock and not move... wouldnt normally be a urgent problem except that the window is locked out in the down posistion... the motor is stuffed so i have no way of getting it back up!

i have tried all things and i have power going to the clip just before the window motor... so i know its fine up to there.

i have also put direct 12v onto the motor and still no luck.

does anyone know where i can get one or does anyone here have a drivers side window motor that could work for my car.

Just paranoid that my car is being left with the window down at the mo.

Thanks in advance guys,

God Bless,

Nate

R33_Cam Proficient

R33_Cam

Posted
Posted

be careful when you change ur motor i changed mine in the drivers door too and the spring went back on my finger and cut it open to the bone requring a few stiches, WATCH THAT SPRING, hehehehe

try JustJap, its pretty pricey but i couldnt find anything else at the time.

Cam.

bless_you Rising Star

bless_you

Posted
  • Author
Posted

cheers cam,

i know what you are talking about :)

well i got a left hand unit from just jap and swaped the cogs and brackets over. works fine now :)

so anyone who needs help with a change over... call me.. i know everything there is to skyline windows now.

b2barker Enthusiast

b2barker

Posted
Posted

Mine was playing up, and it turned out to be the solid brush not contacting properly with the rotor. I bent it a little with long nose pliers and it's a goer.

Also if they play up and you want to wind it up you can take the magnetic cover off the motor without removing the whole assembly (through the speaker well), as it has only two scews. You can then wind it up by turning the rotor manually.

Nizmo Grand Master

Nizmo

Posted
Posted
hey all, im having a tad bit of a problem at the moment...

my window of my drivers door, r33 gtst has decided to lock and not move... wouldnt normally be a urgent problem except that the window is locked out in the down posistion... the motor is stuffed so i have no way of getting it back up!

i have tried all things and i have power going to the clip just before the window motor... so i know its fine up to there.

i have also put direct 12v onto the motor and still no luck.

does anyone know where i can get one or does anyone here have a drivers side window motor that could work for my car.

Just paranoid that my car is being left with the window down at the mo.

Thanks in advance guys,

God Bless,

Nate

Im having exact same trouble with my ZX at moment ..... the window will go down but not up .... so my car is sitting in works carpark with window down :cheers: Paranoid! and cars aircon doesnt work and the heater is stuck on so basically i die of heat stroke having the windows up or i have the windows down and someone can just come n take the car :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • EndZee
      Weird compression after rebuild

      By EndZee · Posted

      I can also smell fuel in oil if that helps. 
    • EndZee
      Weird compression after rebuild

      By EndZee · Posted

      Hello, after engine rebuild(new cylinder liners and piston rings, arp headstuds, metal cometic tripple layer gasket, all new main/rod bearings) and roughly 100km made I did measure compression and it’s (1-6) - 80, 60, 90, 120, 110, 135. It’s rb25det series 1 - hydraulic lifters. Measured on cold engine. Didn’t check on hot due to overall car problems such as broken 3rd gear, idle issues, misfire etc. I did smoke test only on 2nd and 5th cylinder bcs soldering iron used with this method broke itself. So after setting cams to side - side 90 left/right angle I can see smoke coming off from intake manifold and turbo exhaust flange. 5th didn’t notice any smoke. Shop did head, valve etc job but I assemble it by myself. So I thinking about lifters. I don’t remember if they were soft or not it was long time ago. In my opinion I didn’t bleed them and they can be opened more than they should be. Can it be more likely possible? Or timing can be off by 1 teeth and can cause such weird compression? But if timing would be out wouldn’t it be like such big difference across all cylinders? Please help I’m so sad it happened. 
    • sunsetR33
      newbie attempts the GTR life.

      By sunsetR33 · Posted

      Hey, yeah I really like the color. Only paint I'd rather have is KN6, but those are expensive. Right now I'm trying to get the car to the point where I can get it tuned to 370hp so the whole setup can be driven legally, and pass the next inspection that is already due anyway. Beyond that lots of rust fixing I'm afraid, winter project is most likely going to be a front end teardown and fixing the strut tower rust. I know these can be driven daily but I don't think I will do so anytime soon. Will post a build thread soon with a list of issues and futute plans.   Cheers
    • codygrimm27
      Attesa pump mount options / ideas? R32 gtr style.

      By codygrimm27 · Posted

      Wanted to reply to this topic. I'm in the somewhat same boat with our Stagea. I'm trying to install a different rear diff. The Stagea/Skyline uses mounts on top of the rear diff for the ATTESA pump. Any way you can relocate the pump? I did find this kit https://theskylineshed.com/products/nissan-oem-attesa-mounting-kit-to-suit-r32-r33-r34
    • codygrimm27
      Can you mount the ATTESA pump in other locations?

      By codygrimm27 · Posted

      So here's the deal, my wife picked up an S2 AWD Stagea. Super cool, clean car. Looks like the owner in Japan went track spec as it's got some heavy modifications including Exedy twin disk, tension rods, coilovers, GTR brakes, oil cooler & a Nismo 2 way rear diff. Now, cool mods for sure. But, she is just using this as a casual daily driver. The 2 way rear is AGGRESSIVE. It also has solid subframe bushings & poly diff bushings. So that doesn't help either. So far I've tried changing the diff fluid to the correct fluid. Even tried a little friction modifier. No help. This thing clunks, skips the tires & has some slight whine/NVH when driving. Might sound like I'm being picky, but just trying to find a better solution. Here in the states, it's impossible to find a Stagea rear diff. No luck. I do have a 300zx non-turbo diff. Same ratio, 5 bolt axles. On the Stagea, you need both front & rear diff ratios to match. This car is a 4.083. I'd like to just swap a normal rear diff into this thing. Nothing fancy. Even open diff is fine. She's not tracking the car LOL The difference is that the ATTESA pump mounts to the top of the rear diff. There are 3 total mounting points for the pump on top of the diff. With all this being said, what would be the best way to go about this? I could remove the Stagea diff & see if I could get somebody to possibly weld the 3 tabs/mounting points onto the 300zx diff so we could mount the pump on the 300zx diff. I could swap the internals from the 300zx into the Stagea diff but this is not in my comfort zone. Is it possible to mount the ATTESA pump to the underside of the car? Sorry for the paragraph. Just trying to figure out how to go about this. Any help is much appreciated! Stagea Differential - Note two top tabs, one bolt hole for ATTESA pump mounting   300zx Diff - No mounting tabs Also found this mounting kit ?? https://theskylineshed.com/products/nissan-oem-attesa-mounting-kit-to-suit-r32-r33-r34  
×
×
  • Create New...