Jump to content
SAU Community

R34 Gtt Parts


Recommended Posts

a few parts left from a 34gtt i have recently stripped,

may consider swaps i need some stuff for my s13 (rb25 gearbox, clutch fan etc)

prices are negotiable but no stupid offers.

-neo engine cover (pics available we all know what it looks like) $10

-small carbon canister (has a couple vacum lines going into it i assume its a carbon canister) $10

-r34gtt drivers and passenger rear quarter panels, (both have been cut off of a damaged car. there is plenty of steel left on them around the panel joins. any beater should be able to unstitch to attach to a damaged car) $100 each

-r34 rb25 air con compressor and tensioner pulley (unchecked ive never used it, looks fine?) $50

-r34 gtt 2 1/2 inch exhaust, caqt back, includes nismo muffler with a electronic silencer valve (have pics) $50

- r34 gtt drivers a pillar trim good condition, few scratches near where it meets the glass good if yours has holes drilled in it $10

-r34 gtt drivers and passenger rear trims one has a coupke of small marks in the plastic $ 20 each

-r34 gtt hicas rack, removed for fitting lock bar $50

- r32 gtst hicas rack and some lines removed same reason as abouve $ 50

-r34 gtt fuel tank its useless to me $20 without pump or $50 with pump

-r34 gtt parcel sheft, has child safety restraint holes drilled in speaker grills $10

-r34 gtt tripple gauge cluster, the one that sits abouve the centre of teh dash, average condition could use a clean. no gauges $10

-r34 gtt child safety mount braces left and right $10 pair perfect for compliance

-r34 gtt rear window wiper motor $ 10

-r34 gtt steering column, with key, key seems stuck in barrell, $20

-r34 gtt wiper stalksand brackets that bolt to the steering colum $ 20

-r34 gtt drivers floor kick panel witha little peep hole thing (fuses?) $10

-r34 gtt bonnet cable $10

-r34 gtt fuel cap and boot opening cable $10

-r33 standard alloy wheels, good tyres, easily legal tread on all 4 $200 ono

thats all i can think off of the top of my head prices are negotiable within reason of course

will post some items pickup preffered from the barossa valley in south australia.

cheers jamie

Link to comment
Share on other sites

Hey there, this might seem like a weird thing to be after but i cant track one down anywhere, i need the right reverse light lens, you know the ones on either side of the number plates, i bought the car with it missing and i just hate looking at it, if you have both ill buy both to make it abit more worth your time, im desperate to get one so it would be great if you have them still..

Cheers,

Elle :-)

Oh i just thought of something else, i dont know how to explain it, umm you know the lever you use to recline the seat, well the one on the drivers seat in my car is missing the plastic bit that fits over the actuall short metal bit which makes it so difficult to adjust the seat back cause you dont have the big plastic bit to just grab so you've gotta dig ya fingers down to grab the little bit of the metal, it would be awesome if you had one, sorry i know that was probably a confusing explaination of what i was tryin to say.. :-D

Edited by elle
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Are these the Dmax ones you are in reference too? https://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35#description Not a bad idea to get the uni flange ones. I have sent just jap an email too. Will see what they say lmao. Only thing is the Dmax ones are on a big back order. Low key anything will be better then my OEM ones I got as they are sounding like popcorn when I go under load lmao 😂☠️🪦.
    • They should do. I have S14 (or something S chassis, anyway) driveshafts in my R32 (because my diff flanges have 3x2). They're the right length. When you go looking for R32/3/4 driveshafts (for turbos), they're all the same thing, so are the same length. So there really shouldn't be any reason why those cheapies from JJ won't also fit an R34. R32/3 NA should also be the same thing. The (3x the price) D-Max ones are uni-fit. They have 5x1 and 3x2 bolt holes and say they cover all the cars. So that would also suggest that they are all the same except for the flanges. And in that case, the flange goes both ways. I'd be buying the D-Max ones if I ever have to replace a shaft. Because that will open up diff options without needing to juggle shafts also. Juggling shafts is gay.
    • Yeah with the adaptors they do look like the photo above - just the fitment within the plenum itself and then further with the rail to the intake is questionable - we shall see tomorrow hopefully once I get some replies from Aeroflow, maybe those bosses are the missing piece....
    • Should be fine, if you have it sitting too far in, you end up just spraying the walls and have shit idle. You "can" run them like that, however I don't think it's a great idea (also depends on your plenum, might be good to just get the injector bosses first, mock it up and see if you need to get the bottom extension) Ideally your injectors, with the extension should look like this  (Not my photos, just Google)
    • Thanks for the replies guys, it's really appreciated.  It seems the kit was supposed to come with those injector bosses but hasn't. Unsure if they'll help as even with the adaptors to make them a 3/4 height injector they still sit too far out so mount the fuel rail?
×
×
  • Create New...