Jump to content
SAU Community

Recommended Posts

I heard that Single Turbo Supras are pretty wild. Do they mod a N/A engine, or do they mod a twin turbo engine to get these single turbo supras.

I deal suituation, 6speed N/A SZ-R Supra (1993ish) with 1 big turbo.

Anyone know any information on this?

Cheers

(if I have posted this in the wrong thread, feel free to move)

Link to comment
https://www.sau.com.au/forums/topic/34152-question-on-single-turbo-supras/
Share on other sites

Turbocharging a SZ is both a waste of money .. and won't give you the required results unless big bucks are spent. The TT engine is a monster internally, and quite different. You can pick up a TT Supra for under $30k these days, and the NA are often around $20k. To turbo the N/A will cost you probably more than $10k, and it won't be done that well. Its similar to turbocharging a GTS n/a skyline. Can be done, but do you want to bother?

My friend investigated it (and to him money wasn't even really an option), ended up selling the SZ and buying a GTR :) Smart

DJ984 - The twin sequentials use one small and one larger turbo. The smaller one does not have a wastegate and it runs out of puff somwere in the rev range (not sure were) and this is were the bigger one is already workin to take over. Very heavy and tricky setup so big single on a 3 litre which will support 500+ HP on stock internals is usually the path taken.

Cheers

ok, fair enough... so they're both driven of 3 cylinders each?... (like a gtr set-up) it's just that one's small and the other's big in-order to have the best of both worlds (quick "off-the-mark" accelleration + top end power and speed)???

SZ = was the NA

GZ = TT with leather seats, cruise, active spoliers

RZ = TT with cloth seats, airbags and sometimes an active spoiler

RZ-S = was a TT with electric seats but none of the other toys

are you sure its a SZ-R and not a RZ-S? It's very expensive to turbo the 2jzge motor.

The cylinder head, camshafts, intake manifolds, and exhaust manifolds are completely different between the GTE and GE engines.

The intake manifolds are also completely different in design, and again the GTE versions will not fit directly on the GE cylinder head.

The GE engine was fitted with a distributor ignition system, while the GTE engine was fitted with the latest high output coil-on-plug ignition system.

As easy as it would be for the aftermarket, the factory Twin Turbo system from the GTE engine will not fit on the GE as the bolt patterns are completely different.

The Non Turbo Supra received two transmission choices, the four-speed A340 automatic and the five-speed W58 manual. Both can handle mild transmission upgrades in power to about 400 RWHP before problems begin to surface. ( hmm yours is a 6sp )

But then ive read

1996 - the 6 Speed manual transmission in the turbo model was dropped due to emmision regulations. ( so it is possible to have a 6spd before 1996 )

but then

1997 - Return of the six-speed manual transmission.

  • 8 months later...
  • 5 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Probably speedometer itself if the odometer is ticking. If the needle is stuck from a bit of grease or something that can cause it to stay at 0. Or a cracked solder joint in the speedometer can do it too.
    • Thanks Fella’s   to take this off topic and to elaborate a bit more. I have an rb25/30 going into a r32 GTST.. expected to make around 600-700hp. Would you?   A) R34 GTT box   B) CD00#?  I’ve seen a few posts about the CD swap and sounds fairly involved with making it fit etc but if it’s worth the work then I’ll go that way
    • Lower at the hubs. Funny I forgot to mention that part. Do this pull here I turned the camera off too soon but the graph shows a drop at the top and that was because the pipe from the turbo blew off. The tuner said we could’ve made possibly another 15 whp. He also added if I switched to ethanol we could up the boost some more as well. I was comfortable capping it at the most of 20 pounds. Turns out the turbo pipe just needed a new worm clamp. Got home replaced that then did a third gear pull from 3k to 7200 rpm and the power was great to the top. I just got an ecu mounting bracket from IEE that I need to try and get everything to fit well. It’s a PITA to get the harness and ecu fit properly behind that kick plate 
    • He means "as opposed to mechanical cable drive". Older cars (R32 for ex.) had cable drive. Later cars with essentially the same gearbox, ie R34 GT (NA RB25) used essentially the same box as the R32 GTSt, but instead of a cable drive, had an electronic speed sender plugged into the same hole in the box, running from the same little gear that would have run the cable. Some of the shittier later cars use a speed sender on the nose of the diff, or the ABS sensors.
    • Lower than engine, or lower than it should at the hubs? Either way, that is a nice power figure and I'm not surprised you say it rips now. What stopped you from turning it up any more? Injectors? Or did it just stop responding to boost?
×
×
  • Create New...