Alex_r33s2gts25t Posted October 22, 2010 Share Posted October 22, 2010 Hi guys, i own an automatic r33 gtst s2. My friend and i serviced the car the other day, new spark plugs, oil change, oil filter, fuel filter, and now im having issues with the car!! Now when i go to drive it there is like a long pause before it will engage the gears. I disconnected the battery and reset the ecu/remapped twice and it helped very slightly. I go to accelerate now and the revs go up and then after too long a pause it engages the power sort of abruptly. Im not sure what i did wrong... dangerous when i need to get on a roundabout!! Ok one thing i had noticed i put too much oil in... ive been trying to drain it out but it wont come out!! The sump will give me about a litre then just stop. So i tried again the other day, gave me like 500ml then just stopped completely. I think i still have about a litre too much in there... shouldnt the oil be draining like fairly easily?? any ideas?? thanks in advance Alex Link to comment https://www.sau.com.au/forums/topic/341522-r33-serviced-now-i-have-a-problem-plz-help/ Share on other sites More sharing options...
mad082 Posted October 22, 2010 Share Posted October 22, 2010 are you talking about the engine oil being too full? if so, just remove the oil cap, drop the sump bolt out and drain it all out and then refill it. don't see how this could really affect the gearbox though. resetting the ecu shouldn't also have much affect either as it is more than likely something to do with the gearbox oil or the stall converter as to why it takes a while to go into gear. Link to comment https://www.sau.com.au/forums/topic/341522-r33-serviced-now-i-have-a-problem-plz-help/#findComment-5511438 Share on other sites More sharing options...
ARTZ Posted October 22, 2010 Share Posted October 22, 2010 Hi guys, i own an automatic r33 gtst s2. My friend and i serviced the car the other day, new spark plugs, oil change, oil filter, fuel filter, and now im having issues with the car!! Now when i go to drive it there is like a long pause before it will engage the gears. I disconnected the battery and reset the ecu/remapped twice and it helped very slightly. I go to accelerate now and the revs go up and then after too long a pause it engages the power sort of abruptly. Im not sure what i did wrong... dangerous when i need to get on a roundabout!! Ok one thing i had noticed i put too much oil in... ive been trying to drain it out but it wont come out!! The sump will give me about a litre then just stop. So i tried again the other day, gave me like 500ml then just stopped completely. I think i still have about a litre too much in there... shouldnt the oil be draining like fairly easily?? any ideas?? thanks in advance Alex This doesnt sound good..Id say either some sort of sludge build up is blocking the hole..which isnt good..or did you take your filler cap off when u tried to drain it, maybe its just a vacumn lock but ive never had that happen before.. How much oil did you drain out before you put more in, cause if its not not draining now it probably didnt drain properly before you put new oil in, how much did you put in... Link to comment https://www.sau.com.au/forums/topic/341522-r33-serviced-now-i-have-a-problem-plz-help/#findComment-5511461 Share on other sites More sharing options...
GTR-N1 Posted October 23, 2010 Share Posted October 23, 2010 Correct plugs? What gap are you running? Link to comment https://www.sau.com.au/forums/topic/341522-r33-serviced-now-i-have-a-problem-plz-help/#findComment-5511674 Share on other sites More sharing options...
Alex_r33s2gts25t Posted October 23, 2010 Author Share Posted October 23, 2010 thanx for replies guys, i didnt remove the oil cap the second time i went to drain oil, prolly why not much came out. When i drained it when we did the service i think maybe 2 and a bit L came out, and i prolly put like almost 4 back in stupid me not realising till i checked the dipstick it was way over. Anyway i did drain like another litre and a half back out but still got a bit to go. Ill prolly put it on a slight incline and try to drain the whole lot then tip it back in like you said. But yeah the time before this i put standard copper plugs in with 1.1 gap (i used to run .8) and every time i put my foot down the car shat itself, misfiring etc etc so i reset ecu, remapped the timing and it went ok, not great tho. Now with the latest service i went back to 0.8 gap (bcpr6es) and took it for a drive before reseting the ecu and thats when i was having all these issues with the accelerating. I put my foot down, rev meter goes up and nothign happens then suddenly BAM the gear drops in/power engages and it goes - after that initial pause of like 2-3 seconds??! So i reset the ecu / timing and remaped it to the new plugs, but it still does it. Not as bad as before i remapped it (you couldnt even drive it then - too dangerous) but its still doing it to a lesser degree. I go to accelerate and the gear takes its time to engage or the power takes its time to kick in one or the other im not sure which or why!! But now theres maybe a 1-2 second delay. Before all this it would engage almost instantly. Im not sure where to start lol, should i buy new plugs and start over?? Link to comment https://www.sau.com.au/forums/topic/341522-r33-serviced-now-i-have-a-problem-plz-help/#findComment-5512184 Share on other sites More sharing options...
scotty nm35 Posted October 23, 2010 Share Posted October 23, 2010 Sounds like your auto trans is low on fluid, is that what we are talking about? Link to comment https://www.sau.com.au/forums/topic/341522-r33-serviced-now-i-have-a-problem-plz-help/#findComment-5512240 Share on other sites More sharing options...
Moodles2 Posted October 23, 2010 Share Posted October 23, 2010 Sure you didn't drain the auto transmission fluid? Link to comment https://www.sau.com.au/forums/topic/341522-r33-serviced-now-i-have-a-problem-plz-help/#findComment-5512288 Share on other sites More sharing options...
GeorgeLow Posted November 12, 2012 Share Posted November 12, 2012 Guys, I'm having the same problem as well. My car seem hesitant as well. The 2-3 seconds lag is worrisome. So whats the solution to this? I figured that there are few possibilities ranging from a blockage in the air filter; weak battery (Not too sure); blockage in the throttle body or worse, transmission problems. Link to comment https://www.sau.com.au/forums/topic/341522-r33-serviced-now-i-have-a-problem-plz-help/#findComment-6621694 Share on other sites More sharing options...
cobbadan Posted November 12, 2012 Share Posted November 12, 2012 Hey George Do you have a 2-3 second lag between the time you press the accelerator and the time the gearbox kicks into gear like the OP or do you have a lag from the time you press the accelerator to the time the revs come up. ? How does the car feel when your sitting still, in your driveway, is it responsive when you free rev it. I don't see how a problem with your air filter or your throttle body is going to affect your transmission. What happens after the lag period ? you put ya foot down -- 2-3 seconds lag -- then the car takes off ,, what happens next, does it run fine through the rev range and change gears perfectly after the initial lag ? Link to comment https://www.sau.com.au/forums/topic/341522-r33-serviced-now-i-have-a-problem-plz-help/#findComment-6622617 Share on other sites More sharing options...
BuuBox Posted November 14, 2012 Share Posted November 14, 2012 (edited) Sure you didn't drain the auto transmission fluid? It sure sounds like that. Edit: didn't realise I was responding to a post from 2 years ago... Edited November 14, 2012 by BuuBox Link to comment https://www.sau.com.au/forums/topic/341522-r33-serviced-now-i-have-a-problem-plz-help/#findComment-6625297 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now