Clutch Issue R33

[sneaky1]

ok sounds weird but clutch is squeeking on my friends 33.

i have pulled off the box to have a thorugh inspection.

i think it is the slave cylinder not keeping pressure on the clutch fork hense allowing the thrust bearing to just sit off of the pressure plate fingers.

i think that the thrust bearing is everynow and again touching the pressure plate causing the squeek.

the reason for this happening is the fork is a slightly sitting just off the slave cylinder and it has nothin to do with the fork.

i think the problem is that the slave cylinder is not operating correctly and extending out and putting pressure on the fork.

my question is. is the slave cylinder suppose to keep the pressure on the fork or do they just slop around cause the rb20 setup i have in the 31 and the setup i had in the 32 the slave cylinder kept a constant pressure on the clutch fork hense keeping a constant pressure and keeping the thrust bearing in contact with the fingers on the pressure plate.

cause atm the thrust bearing is a couple of millimeters off of the fingers of the pressure plate and when it makes contact whilst driving it squeeks. it actually sounds like a loose exhaust squeek. and its not a constant squeek showing symptoms like a thrust or imput shaft bearing.