Dual 12inch Thermo Fan Shroud?

[alwaysdreaming]

im just planning on running a switch on mine, not going to have sensors hooked up or anything.

its in a pure track car, will this b alot easier to wire up being that it shouldnt requir a sender ect?

[ryan101]

i have a davies craig set-up with this controller and wondering if i can hook up a manual override aswell?

[Rekin]

im just planning on running a switch on mine, not going to have sensors hooked up or anything.

its in a pure track car, will this b alot easier to wire up being that it shouldnt requir a sender ect?

yeah in a pure track car you wont need the controller I have. Cheapest way would be having a water temp gauge/display and turn on the fan when required, but you wouldnt like to forget cause the temperatures will shoot straight up. You are better off just getting a simple temperature trigger controller. You can pick them up for under $50 etc

i have a davies craig set-up with this controller and wondering if i can hook up a manual override aswell?

Better off contacting Davies Craig and see if they can get back with any information. The easiest way would be to wire up a relay with a switch on the dash to trigger 12v power to the fans.

[alwaysdreaming]

awsome thanks mate, cant wait to get some bloody fans running. my 32 is still at revzone lol. hopefully get it back soon to play with it a bit more

[ryan101]

yeah in a pure track car you wont need the controller I have. Cheapest way would be having a water temp gauge/display and turn on the fan when required, but you wouldnt like to forget cause the temperatures will shoot straight up. You are better off just getting a simple temperature trigger controller. You can pick them up for under $50 etc

Better off contacting Davies Craig and see if they can get back with any information. The easiest way would be to wire up a relay with a switch on the dash to trigger 12v power to the fans.

cheers mate, great help

[craig R33]

im currently in the process of a few cooling upgradeson my cefiro drift car.

got an ISC 52mm rad and a brand new AU thermo setup, but the shroud is too thick, and hits the power steering pump pulley.

i cant slide it down to position at all.

i have exactly 6.5cm room between rad and nut on the pulley, and the shroud is 7cm... im not just sure if i can trim it thinner seeing as the fan hub is also 7cm...

it all comes down to where the shroud is positioned rlative to the pulley nut i suppsose lol

ffs nothing it easy

[HIZOKU]

IF you want the best

Thermo Fans CFM Hight (MM) Wide (MM) Depth (MM)

Derale Cooling Products 13" TWN pn:16928 4000 351 723 81 211.95

Derale Cooling Products 13" TWN pn:16934 4000 400 796 82 214.95

Derale Cooling Products 13" TWN pn:16028 4000 351 723 81 334.95

Derale Cooling Products 13" TWN pn:16027 4000 457 660 95.25 $369.95

4000CFM to give you a idea of power a AU is 2400-2600

http://www.summitracing.com/search/Department/Cooling-Heating/Section/Fans/?Ns=Rank%7cAsc

This site has many brands and so on you can pick fom with CFM ratings and so on SPAL is good recommended by PWR