Jump to content
SAU Community

Fs: X Force Cat Back System Suit V35 Coupe & Cai Intake

30Five
 Share

Recommended Posts

30Five Community Regular

30Five

Posted
Posted

Hey guys, I'm returning my car back to stock performance so i have no use for these item anymore.

Item:

X-Force Cat Back system

Bomz CAI intake system with an extra K&N pod filter+adaptor

X-Force system is Originally for a 350z, Had it Modified (extended) to suit the Coupe by a mate who owns a exhaust shop.

Price/Payment:

$800 exhaust

$150 Intake

Would Prefer Pick-up only

Condition:

Exhaust is only 7-8 months old, flexi pipe on the Y-Pipe are worn underneath due to car being too low. Doesnt affect performance though.

Intake is 1-2months old

Both still in good condition. scratches here

Location:

Brisbane, Southside

Contact:

PM, Post or Call/txt Bee 0402153919

Exhaust is quiet on start up, just like stock if not slightly louder. on WOT it comes to life with a aggressive sound.

Really nice when cruising, no drone at all.

Intake sounds the good, really aggressive note on WOT specially over 4-5000rpm, combined with the exhaust its music to your ears.

Exhaust and intake, My car dyno'd 230hp atw. that was with my old intake (z tube+panel filter)

Haven't dyno'd it since the new intake.

Parts are still currently on the car, will take it off once i have buyers.

Will get pics of items soon.

Thanks

  • 2 weeks later...
30Five Community Regular

30Five

Posted
  • Author
Posted

Exhaust is off the car now, will have pics up tomorrow.

Here's a link to what the exhaust basically sounds liieke

Ripstah - Your Inbox is full as i can't send PM's through to you.

30Five Community Regular

30Five

Posted
  • Author
Posted

Would really like these items gone asap, I have no use for them anymore.

$700 for the exhaust shipped to you

$120 for the intake kit shipped to you(without the extras)

or $800 both shipped to you.

-Bee

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Stock rb25det neo questions

      By GTSBoy · Posted

      Essentially, yes. Although I wouldn't put the AFM on the crossover pipe. I'd want to put it into what amounts to the correct size tube, which is more easily done in the intercooler pipework. I bought a mount tube for card stile AFM that replaces the stock AFM - although being a cheap AliExpress knockoff, it had not flange and I had to make and weld my own. But it is the same length and diameter as the stock RB AFM, goes on my airbox, etc etc. I don't have a sick enough rig to warrant anything different, and the swap will take 5 minutes (when I finally get around to it and the injectors & the dyno tune).
    • Wazmond
      Stock rb25det neo questions

      By Wazmond · Posted

      So to summarise, the best thing to do is to move recirc to between turbo and IC, and maf on the crossover pipe. Meaning I'd need a recirc flange, drill a hole in the piping on turbo outlet area. And drill hole on crossover to fit/weld maf sensor? Either that or put the MAF on the turbo inlet right?  Is an aftermarket recirc/blowoff valve recommended? Do currently have family in Japan so could probably bring something back with maybe a cheeky lil SuperAutobacs run?
    • tsuokun
      Lets play a game - What is causing my oil consumption?

      By tsuokun · Posted

      Yep, so far most have said that it looks like corrosion on the wall from piston not moving. Which then has probably damaged the oil rings and caused those vertical marks. The longest the engine was still after the rebuild, was the winter of 2018 - 2019, plus the boat trip to Japan. When I shipped the car, it had normal gas in the tank but before that winter pause, it had E85 in tank.  In any case, even if either one of those was the cause, it happened close to 6 years ago and the car has been driven something like 30 000kms after the fact. Again, apart from the plugs and the dip stick, there is nothing in the way the car runs that would indicate what has been going on in the engine. I am going to consult a shop and ask their opinion, what would be the best approach. I do have some access to a garage I could use to diagnose further myself, but time is very restrictive. Might end up buying another engine that could be used while this one is being remedied. Without pulling the head, it will be impossible to find out if it needs another bore, but here's to hoping a hone would suffice.  Goddamnit, I would really have preferred this not happening.  
    • 25RBGT
      Got this r31 silhouette flood car to rebuild.

      By 25RBGT · Posted

      Boot is going to be replaced eventually. I just wire brushed what I could and rust converted. Then painted in rust kill primer. the spoiler also got repainted and plugs replaced on the ends. The under side of the bonnet is going to be black also, currently white. But red on the top side, same colour code as the silo to begin.
    • Shoota_77
      Car Rotisserie

      By Shoota_77 · Posted

      Hi guys, has anyone either purchased or built themselves a rotisserie for their car before? I can only just justify the need for one hence why I should just make one but at the same time, if I make one I can kiss another 4 weeks of potentially productive car working time goodbye because I'm building a bloody rotisserie....  I mainly want it for the application of the body deadener.  Cleaning the old stuff off, priming and then colour over the deadener doesn't worry me, it's just the application using the Schutz Gun that I feel would achieve a significantly better finish painting it side on and keeping the Schutz Gun upright.  I don't think they would work well on the side let alone almost upside down for some areas.  If the product I use (Terosun, etc) could work through a HVLP ok then it might be ok to apply without the rotisserie.   I can get one of these style ones for about $1200 which is pretty good value-     I reckon if I made one it would cost around $500 but it's more the time that it would take is more of a killer than the cost.  They look to hold their value pretty well second hand so I could always sell it after using it and realistically only lose $200-$300 at worst.  Or keep it and buy another project when this one finally sees the light of day... Anyone selling one...? Cheers!  
×
×
  • Create New...