Jump to content
SAU Community

Recommended Posts

No I'm not saying there wrong, it just seems so wasteful :banana:

Anyways I'm sure not all chefs do it...The chef at the local Chinese doesn't deglaze the pan, he just chucks everything into a very disgusting looking pan with burnt crap still in it. ;)

As long as you are not over the limit there is no law stating you can't have an alcoholic beverage whilst driving.

Really? A while back my mate who was at the time freshly off his P's decided to be a smartarse and raise his stubby to the cop sitting next to us. It was his first beer of the night and had only gone through 1/4 of it so he definately wasn't over the limit btw, but to cut a long story short he got defected (lol) but he also copped a fine for street drinking. It might be technically legal to drink and drive if your under 0.05, but just not anywhere thats public, and incidently most roads are public places

errr no...

the wine is used to deglaze the pan should be maybe 100ml's at most if cooking for 4 and this should be added to the pan while hot to strip the flavours from the bottom of the pan... it is not for the taste of the wine at all

the wine hits BOILING point instantly and will have 0% alcohol within a few seconds

hm, didn't know that.

but even though the wine hits boiling point instantly, i think unless its a dash of wine, there will still be significant amounts, it will be reduced but there is a lower limit to how much you can remove via distillation.

BUT, if there's very little wine used in the first place, then the alcohol remaining will be negligible.

There's this chinese wine chicken thingy that my granny cooks, its double boiled in a sealed pot with ginger, chicken and a whole load of other stuff, even though its boiled for about 45mins, the soup still tastes of the chinese wine and alcohol. but, its pretty awesome.

Edited by xALmoN
Drinking in street/public place is only an offence if the area is designated as a "dry" area by counsel by laws. They need to have signs in area stating same too.

Oops that happened in WA where I think it is a $200 fine if you get caught drinking in any public place, I assumed victoria would have the same laws but I guess not

You can choose to have a blood test but the alcohol levels decrease MUCH faster in your breath than blood. If you were say 0.07 with breath and had blood taken a hour later you would most likely be 0.08+.

In most cases people's alcohol level are on the rise. They keep rising generally for about 1-2 hours before decreasing. Unless it's just mouth alcohol.

it all depends on the person though, that's what it basically comes down too.

How fast they matablize the alcohol...

Oops that happened in WA where I think it is a $200 fine if you get caught drinking in any public place, I assumed victoria would have the same laws but I guess not

Nah, there isn't a law saying you can't drink anywhere in public, but there is designated "dry" areas...which I can't of to many places that aren't..

because i am so nice/was bored @ work I decided to make a tut on carbonara...

cook garlic

IMG_0302.jpg

add bacon - cook more

IMG_0311.jpg

bacon is cooked... notice epic bacon flavour helplessly trapped on pan...

IMG_0313.jpg

deglase pan with wine

IMG_0316.jpg

epic bacon flavour now released and ready to be consumed by hungry human

IMG_0317.jpg

place egg in bowl.... i use an extra yolk for flavour

IMG_0318.jpg

add parmesan and some parsley and black pepper

IMG_0320.jpg

whisk that shit

IMG_0323.jpg

add cooked pasta to pan... in this case it's housemade tagliatelle

IMG_0324.jpg

add pan contents to bowl contents and mixy mixy

IMG_0325.jpg

add some shaved parmesan for texture/flavour

IMG_0326.jpg

put in bowl... garnish with raw egg yolk for the lucky eater to mix through themselves

IMG_0328.jpg

and that's how you make a carbonara...

some people add cream, but traditionally it's not really supposed to be there :)

wut

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks Duncan! Yeah it's street use for me only. Maybe occasional track day. Any difference in noise when running with the two pumps? I would expect the lift pump to be more quiet than the main pump so hopefully not? And yes, unfortunately quite a big price difference to the simple hanger setup. Though I'm usually willing to trade money for better reliability and future-proofing. Buy once, cry once and all that. I'd be very happy to never have to deal with fuel pump / wiring issues again  
    • The old manifold was quite under the GTR strut brace.  The new manifold is quite [unknown] the GTR strut brace. The GTR strut brace was needed to clear the bonnet vents. The Old strut brace will almost certainly clear the new manifold, but not the bonnet vents. The old strut brace will almost certainly clear the new manifold, and the new bonnet without vents. But I am hoping the GTR strut brace clears the new manifold :p
    • On the bright side, at least you knew that it happened and remedied before anything happened. A friend of mine just took his Fiat 124 to a shop for an oil change and they didn't tighten the oil filter housing properly. 4.5 quarts spewed out and even after refilling + tightening the cap the engine has a tick now.
    • So, more pain. The FAST manifold is a little larger than the stocker. This is problematic because there really wasn't much clearance to begin with, so going from 'barely enough' well into 'no' is sad based on the external dimensions of the thing, even though where it bolts to the head is the same. Result is the fuel rails sit a good 25mm higher, and this is a bit of an issue with the wiring that runs behind the motor, and the fuel lines, and everything else. When pushing the manifold on, it required a huge amount of force to crush wiring looms to fit it, sensors like the MAP sensor are about 1mm from the firewall, and the FPR just has to bend ABS lines to be forced into place. After some brainstorming and some sad drinking, the loom for some reason ran from the grommet behind the ABS sensor, then to the driver side head, then back to the passenger side head. So all of this was pulled back and stripped, a few wires cut and rejoined, so that the 'branch' was now on the passenger side's head as below: Before you basically couldn't see anything behind the driver head. This is much improved! The MAP sensor is now pointing up (instead of at the firewall) Brackets have been made up for the rail. The rails are for a LS1, the manifold is designed around a LS2 as it's base. Which of course has slightly different bracketry and water pump clearance, hence the mods people need to do. Should be hopefully mounted tonight. I spent money on a new FPR that is slightly more compact than my Turbosmart FPR1200. The gauge has also been moved to the rail. There's also apparently an ORB to AN Union instead of the adapter, because the ~25mm of the current adapter is going to make the difference. Provided this all goes together and arrives today, it'll be the totally not stressful attempt to start it.
×
×
  • Create New...