Jump to content
SAU Community

Recommended Posts

Interesting.

Do you have the shaft speed sensor on it? If so, what does it read at what boost and powah? Got a graph? Everyone likes a picture.

Yeah, I got a shaft speed sensor on it, in fairness we had to get a circuit made to convert the signal for the ECU to be able to decipher it (there wasn't one available at the time) so I can't be 100% that I'm getting the correct reading. I have recently bought the Full-Race convertor box, so when I fit that and get a run on the track or the dyno I will get some more data logs out of the ECU to be sure.

At 22psi it gets to 132,000rpm (absolute max is said to be 140,000)

I have the dyno sheet of the tune, but nothing with the speed sensor.....I would have to maybe do a screen shot of the data log off the Link ECU software?

So really, in the current state of tune the turbo has nothing left unless you want to REALLY wring it's neck.

470 odd kw ain't nothing to sneeze at though.

No doubt there will be others out there that could get more out of it that I have, my setup is by no means perfect.....most of it was a bit of a guess as no one had run this turbo on a 3ltr six cyl anywhere on the globe at that time.

There are other 8374 1.05 powered RB's running ethanol and making bigger numbers than me......but I'm pretty sure I'm boosting earlier.

Yeah, at this stage 470kw is plenty for a road car that sees the track about twice a year :)

Edited by Sub Boy32

Haha thanks CHRIS :P

View very much noted and accepted as gospel as 8374 turbo is epic! Had the joy of going for a run in a car that had 1 strapped to it today ;)

Quite different to your car being 2.6L with V cam and 1.05 rear only running a baby 21psi with Ethanol on an "unfinished tune" (needs more injector) car made + or - in the 400kw zone but f**k me what an impressive turbo! For everything this setup had going against it (being boost limited unfinished tune not enough injectors etc) still impressed the hell out of me!

EFR FTW!

  • Like 1

Haha thanks CHRIS :P

View very much noted and accepted as gospel as 8374 turbo is epic! Had the joy of going for a run in a car that had 1 strapped to it today ;)

Quite different to your car being 2.6L with V cam and 1.05 rear only running a baby 21psi with Ethanol on an "unfinished tune" (needs more injector) car made + or - in the 400kw zone but f**k me what an impressive turbo! For everything this setup had going against it (being boost limited unfinished tune not enough injectors etc) still impressed the hell out of me!

EFR FTW!

Just need Paul's motor and it'll be a whole lot of fun

Haha thanks CHRIS :P

View very much noted and accepted as gospel as 8374 turbo is epic! Had the joy of going for a run in a car that had 1 strapped to it today ;)

Quite different to your car being 2.6L with V cam and 1.05 rear only running a baby 21psi with Ethanol on an "unfinished tune" (needs more injector) car made + or - in the 400kw zone but f**k me what an impressive turbo! For everything this setup had going against it (being boost limited unfinished tune not enough injectors etc) still impressed the hell out of me!

EFR FTW!

Will be interested to see the results when it's done!

Yeah a bit different to mine, smaller capacity, but V-Cam and 1.05a/r and E85......

Just need Paul's motor and it'll be a whole lot of fun

As discussed this arvo, I think there is so much left in that setup.

- 35 degree day for starters

- the tune

- boost limited to 21 ish psi. A turbo this size wouldn't be out of bed yet

- fuel issues.

Yet it was still very impressive.

Cracking gates in 4th at 3700 rpm is silly for a turbo of this size. You'd expect talk like that with it on a 3.0 or something of the sort.

All this talk make me looking forward to see what a RB26 with 250cams with 83/74 1.05 plumb back will do. we don't have ethanol over here, but I have water/meth. I don't really care for dynoqueen number, i care more about how it will feel/drive :) Hopefully, it will be like I wanted ; responsive as a GT-SS, with power of the -5 :)

When I think about it, i'm thinking maybe I should had gone 0.92 or 7670 with 1.05 for exemple.

All this talk make me looking forward to see what a RB26 with 250cams with 83/74 1.05 plumb back will do. we don't have ethanol over here, but I have water/meth. I don't really care for dynoqueen number, i care more about how it will feel/drive :) Hopefully, it will be like I wanted ; responsive as a GT-SS, with power of the -5 :)

When I think about it, i'm thinking maybe I should had gone 0.92 or 7670 with 1.05 for exemple.

This car was outspooling my dads 2.6L -9 setup by quite a fair whack! Im a response whore and like you not interested in a dyno queen & this car seriously impressed the hell out of me! A 7670 with 1.05 would be as good if not better spool up than the stock turbos IMO ;) Edited by Mick_o

This car was outspooling my dads 2.6L -9 setup by quite a fair whack! Im a response whore and like you not interested in a dyno queen & this car seriously impressed the hell out of me! A 7670 with 1.05 would be as good if not better spool up than the stock turbos IMO ;)

Good to know ! :) Surely the v-cam must be doing some of its magic. We shall see, to my knownledge, I'm the first to try a turbo of this size with tiny cams..

Oke since it was said that the 7670 did not flow enough for my hp goals I made my decision :)

Since my car will be mostly street and occasionally track I think this one will do the job for me.

More power and less hastle with external gates and pipes.

Efr 7670 ewg next to the efr 8374 IWG (twin scroll)

riuhoo.jpg

This one has a sand casting too btw.

  • Like 1
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Welcome back to the scene! Godzilla Motorsports were well regarded back in the day.  My GT-R had work done there prior to my ownership.   SRS (Street Race Solutions) in Toowoomba worth a look.  They've built some pretty wild Skylines. Their YouTube channel is comedic to watch!  I'm sure they're all on the glass BBQ but they get shit done! 🤣
    • Hard to say what the extra connector is, it looks a bit like a coax type connector, so possibly a separate radio/GPS antenna, or even another camera input?  The V37 series (including the Q50), did go through a model refresh in 2020, since Australia didn't get any Q50s newer than 2019, we didn't get any of the refreshed models, so there could also be other unexpected problems to overcome to swap an older Q50 head unit into a new model V37. There probably aren't too many people around that have made these sorts of changes to a Q50/V37, so you might end up being the first if you do decide to go ahead. ACP is Apple Car Play and AA is Android Auto, they are roughly the same thing for the 2 major phone operating systems (Apple's iOS and Android), it allows you to connect your phone and access a number of your phone applications on your car system.  With Nav apps included, so you could use google maps/Waze or whatever your favourite navigation app is, instead of using the built in navi system.  I think this would be a better solution if it is only Navigation that you are looking as swapping the head unit for. GPS signals are the same around the globe as the GPS satellites continuously circle the globe, but it is the head unit that doesn't allow you to load Australian maps, or at least no-one had made an Australian map that will load up on the JDM head unit. Regarding the TV standards, I assume you are referring to the AV inputs?  I haven't ever tried to use them, Japan used a slightly modified version of the US NTSC system, and Australia uses PAL for composite video, that said, I wouldn't be surprised if a video input could work with either system.  That is mostly irrelevant here though, unless you plan to use those inputs for something?
    • If you've got bucket loads of $. Go single. If not, just upgrade the twins, Garrett -9's or whatever the current equivalent is for a healthy 350awkw and leave it at that. Will probably still cost you 10k to do in this day and age.
    • When you looking to buy injectors?? I could possibly sell you my 1d1700s for decent price. Done little work I just need bigger again 😫 
    • Is a dirty cheese eating surrender monkey in drag.
×
×
  • Create New...