Jump to content
SAU Community

Recommended Posts

I cannot see why people are still using twin setups. If garret cannot develop a rear housing for their gtx twin range, means to me that the problem is with the rear housing. It nearly cost me an engine in 6min of track time.

The setup that Piggaz is referring to is mine.

All I can say about the setup is that I should of done it earlier and not bothered with twin -5's.

IT'S FCKN AWESOME in all areas. Just do it and you won't look back.

  • Like 1

The BW EFR turbos have a speed sensor that you can install on them to measure the rpm of the turbo. They have upper limits of course. There's a pretty fixed relationship between boost, speed and airflow (from memory, don't scold me if i'm wrong!) so it helps with safety and getting a good handle on exactly whats going on in your setup

The exact same one that sits on the back end of -5's

Ok, but that was made in the 90's. Do you know why they didn't make a newer design rear housing?

With my setup, the turbo is making noise at 2000 and at 3000 it wants to rip your face off.

The BW EFR turbos have a speed sensor that you can install on them to measure the rpm of the turbo. They have upper limits of course. There's a pretty fixed relationship between boost, speed and airflow (from memory, don't scold me if i'm wrong!) so it helps with safety and getting a good handle on exactly whats going on in your setup

Boost and flow doesn't have a fixed relationship. That's why I'm maxing out at 25psi on a 3 litre. A 4cly 2ltr would prob take 30psi before maxing out.

Keeping under the speed limit stops the turbine falling off.

The BW EFR turbos have a speed sensor that you can install on them to measure the rpm of the turbo. They have upper limits of course. There's a pretty fixed relationship between boost, speed and airflow (from memory, don't scold me if i'm wrong!) so it helps with safety and getting a good handle on exactly whats going on in your setup

ah yes my mechanic did install the speed sensor for the RPM on the compressor wheel. also recommended I get one.

he said due to the lightweight material used on BW, its a good idea to keep an eye on how fast it is spinning so you don't break it!

just post the gtx turbos up here and I'll test them for you

So you can find out 1st hand how hard they will fail and prove me right about all the shit i been harping on about in the GTX thread? Of how GTX compressors wont work with factory location housings?

Garrett put these compressor wheels in their own housings for a reason mate ;)

Honestly Pete you will be making the right move taking the EFR route.

So what if the GTX wheels turn out to be a "tad better" (which i highly doubt) will the machining costs etc be worth it? The EFR will still punch holes in them from 800rpm - 8000rpm in every single way and the money spent on machining etc goes to a manifold for the single an intake pipe, a cooler pipe change and a dump pipe.

The offset in the price wouldn't be that much different (if going IWG .92) BUT i guarantee the result and the way the car drive will be 100% better!

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Coming home late at night and driving past the police is the only reason i need one haha And yeh, definitley needs a switch to quickly enable it, dont have time to be getting my phone, opening an app, waiting for it to update etc before being able to make the change
    • Because it is financially convenient for them lol. Why wouldn't they want to give you the lowest possible valuation for your car?
    • Yep. @Duncan also shannons they will rip you dry and will be probably limited on how much you can drive. Also keep in mind that you always have to have it garaged with Shannons, with enthusiasts as per their PDS you can have it 2 times per week on the driveway for example. 
    • I had a generic 4" Varex rear box on my old V8, worked a treat for sneaking home late at night, it was as quite as stock when closed The car was "fairly" loud when open as it consisted of 1" 7/8 headers to 3" catted Y pipe, to 4" single, it did have a resonator in the mid pipe and only the Varex out the back I also hard wired in a Varex dash mount switch, as the key fob thing is a pain to use when driving I wouldn't recommend giving the beans when it is closed though as it creates a large restriction in the exhaust  It also can in very handy when pulled over for "random" breath tests or just cruising past the constabulary   
    • Here is the before and after of the scraping/sanding of the IC pads on the tachometer board for the fix mentioned in this thread. And yes it worked fine after. Just a note if you change any components on the board the tach calibration can be wrong showing the wrong idle etc...only problem is once it is installed back in the cluster you can't get to it to adjust...ouch! My fix was to cut out the calibration pot (the blue one) from the board and run it with two wires to the fuse panel under the dash where I could adjust the idle calibration once everything was installed. And yes I soldered everything up again including the half soldered components either side of the IC in my photos                                
×
×
  • Create New...