Jump to content
SAU Community

Recommended Posts

FROM THE NEWS DESK :x

Was wathcing the news two nights ago and they had a story on high ron fuels and said they were moving to outlaw them as well as octane boosters and both will not be available after the end of the year. Apparently the "Environmental Protection Agency" has performed tests and found that they contain substance that is TOO harmfull for us.

This sucks, but what is worse is the fact that they are also banning c16 and c21 and VP race fuels as well unless you have a special CAMS/ANDRA Permit that states that you will use it only on the track and not even for tuning at a wrkshop.

Not happy. :P

Link to comment
https://www.sau.com.au/forums/topic/342-octane-booster-illegal/
Share on other sites

Guy's they are talking about banning Racing fuels and Octate Boosters on the Street. Racing fuels are banned as it is,,,but not Additives,,,Thats the One they want Dead. Octane boosters,,,,you can always get around that,,,just use Tolenne,,,,,4 to 1 from memory.

Hasn't much to do with us really,,,unless YOU are not running an 02 sensor.

Now whats the Fine for NO Cat??????.

Neil.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • How much have you lowered?  I had 350Z springs in the rear and was able to pull the camber into factory spec with the factory arms on the rear, obviously the front ran negative camber as it isn't adjustable, but rotating the wheels regularly evened out the wear.
    • Either the installer needs to come back, you need an auto electrician, or you need to learn automotive electricals yourself.   First step Id look at is where that big thing came out of, is there still things unplugged at that location? Maybe they just forgot to put a relay in or something?
    • Well, this is probably where a wiring diagram and a multimeter come into play.
    • I can say to anyone thats doing this; having done a number of R clusters; just be careful if its an unknown cluster.  It takes a bit of force to pull up; but if it feels excessive then its probably stuck. I've had this and pulled the entire hair spring out; and I can tell you; its not easy getting the correct spring replacement with the correct inner diameter and winding. In my case someone had used some sort of adhesive to stick it to the spindle and it pulled the whole spindle out; which the force seperated the hairspring from the spindal and caused it to deform.  You may have to clean it (IPA); or in my case if i'd known i should have used some sort of solvent on it.  Also check out Cruizin Central on eBay. He does all sorts of dials; and you can email him with any custom designs you want. So if you want like certain logos etc...he'll send you a mock of what it will look like then you accept the order and he'll take care of the rest. Fantastic dials and he can do basically any design you want. 
    • Have you confirmed its the actual axles? Also the wheel bearings that mount on the hubs to hold the axles wear out. I replaced mine as they got play in them. It sorted my play issue. 
×
×
  • Create New...